ImpexメーカーMSS-1280の使用説明書/サービス説明書
ページ先へ移動 of 27
NOTE: Please read all i nstructions caref ully befor e using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruc tion Parts L ist Warranty Ordering Parts Model MSS-1280 Retain This Manual for Reference 08-03-09 OWNER'S MANUAL DELUXE SMITH MACHINE MSS-1280 IMPEX ® INC.
TA BLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICES..................................................................... 2 SMITH MACHINE HARDW ARE PACK……….
IMPORTANT SAFETY NOTICE PRECA UTIONS This exerci se machine is bui lt for optimum safety. How ever , certain precauti ons apply whenev er you operate a piece of exer cise equi pment. Be sure to read the entir e manual before you assemble or operate your machine.
WA RNING LA BEL PLA CEMENT The w arning labels shown here hav e been placed on the back of Rear Support, and Upper Frame. If the labels are missing or illegible, please call customer service at 1- 800-888-8899 for replacement s. A pply the labels in the location shown.
SMITH MA CHINE HA RDWA RE PA CK NOTE: The f ollow ing p arts are not d rawn t o scale. Please use your ow n ruler t o measure the siz e. 4.
CA GE MA CHINE HA RDWA RE PA CK NOTE: The f ollow ing p arts are not d rawn to scale. Please use your ow n ruler t o measure th e size. 5.
SMITH MA CHINE A SSEMBLY INSTRUCTION Tools Required for A ssembling the Machine: Tw o Adj ustable Wrenches and A llen Wrenches. NOTE: It is strongly recommended that tw o or more people assemble this machine to avoid possible inj ury. STEP 1 (See Diagram 1) A.
STEP 2 (See Diagram 2) A.) Do not tighten Nuts and Bolts until instructed to do so. B.) Attach the Left Upr ight Beam (#1) to the Left Rear Support (#5) and onto the left Base Frame (#3). C.) Secure it to the Base Frame w ith two M10 x 4” Allen Bol ts (#54), four Ø ¾” W ashers (#57), and tw o M10 Aircraft Nuts (#58).
DIAGRAM 2 8.
STEP 3 (See Diagram 3) A.) Attach tw o Ø 2 3/8” x 2” Rubber Bumpers (#30) to the hol es on the Cross Brace ( #7). Insert the two R ear Short Guide R ods (#17) throug h the two Rubber Bumpers i nto the holes on Cross Brace.
DIAGRAM 3 10.
CA BLE LOOP DIA GRA M 11.
STEP 4 (See Diagram 4 & Cable Loop Diagram) A.) Attach the 170” Upper C able (#25) to the openi ng on the Front U pper Frame (#14) . B.) Attach a Pulley (#33) to the opening . Secure it with one M10 x 4” Allen Bolt (#54) , two Ø ¾” W ashers (#57), and one M10 Air craft Nut (#58).
STEP 5 (See Diagram 5 & Cable Loop Diagram) A.) Attach the 62” Lower Cable (#26) to the open bracket on the Cross Br ace (#7). Attach a Pulley (#33) to the bracket. Secur e it w ith one M10 x 1 ¾” Allen Bolt (#52) , two Ø ¾ ” W ashers (#57), one L- shaped Cable Retainer (#24), and one M 10 Aircraft Nut (#58).
STEP 6 (See Diagram 6) A.) Place the Lifting Sleeve ( #8) in betw een the two Safety Stop Frames (#18) . Align the holes. Insert the W eight Bar (#13) from outside of one Safety Stop Frame through the Lifting Sleev e to the other Safe ty Stop Frame on the other side.
SMITH MA CHINE EXPLODED DIA GRA M 15.
SMI TH M ACHINE PA RT LIST KEY NO. DESCRIPTION Q’ty 1 Left Upright Beam 1 51 M10 x 1” Allen Bolt 1 2 Right Upr ig ht Beam 1 52 M10 x 1 ¾” Allen Bolt 2 3 Base Frame 2 53 M10 x 4 1/8” Allen Bol.
BENCH HA RDWA RE PA CK NOTE: The f ollow ing p arts are not d rawn t o scale. Please use your ow n ruler t o measure the siz e. 17.
BENCH HA RDWA RE PA CK NOTE: The f ollow ing p arts are not d rawn t o scale. Please use your ow n ruler t o measure the siz e. 18.
BENCH A SSEMBLY INSTRUCTION STEP 1 (See Diagram 1) A.) Attach the Ben ch B ase Frame (#6) to the Re ar Stabilizer (#7). Secu re the side-ho le s with tw o M10 x 4” Car riag e Bolts (#41), tw o Ø ¾” W ashers (#31), and tw o M10 Aircr aft Nuts (#33).
STEP 2 (See Diagram 2) A.) Attach the M ain Seat Support (#1) to the Bench Base Frame (#6). Secur e it with three M10 x 4” Carri age Bolts ( #41), three Ø ¾” W ashers (#31), and three M10 Airc raft Nuts (#33). B.) Attach the Fr ont & Rear Seat Bracket ( #4 & #5) to Main Seat Suppor t.
STEP 3 (See Diagram 3) A.) Al ign the br acket on the Backrest Adjustment Support ( #8) in betw een the two Backr est Supports (#3). Secur e it w ith four M8 x 1 5/8” Allen Bolts ( #34), eig ht Ø 5/8” W ashers (#30), and four M8 Aircr aft Nuts (#32).
STEP 4 (See Diagram 4) A.) Attach the Backrest Board ( #13) to the Backrest Supports ( #3). Secure it w ith four M8 x 1 5/8” Allen Bol ts (#34) and four Ø 5/8” W ashers (#30). B.) Attach the Seat Pad (#12) to Fr ont & Rear Seat Bracket ( #4 & #5).
STEP 5 (See Diagram 5) A.) Attach the Leg Developer (#2) to Main Seat Support ( #1). Secure it w ith one M10 x 3 1/8” Allen Bolt ( #38), tw o Ø ¾” W ashers (#31), and one M10 Air craft Nut (#33). B.) Inser t two Foam Tubes (#10) half way through the hol es on Leg Dev eloper.
24.
BENCH PA RTS LIST KEY NO. DESCRIPTION Q’ty 1 Main Seat Support 1 2 Leg Devel oper 1 3 Backrest Support 2 4 Front Seat Bracket 1 5 Rear Seat Bracket 1 6 Bench Base Frame 1 7 Rear Stabilizer 1 8 Backr.
IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warr ants this produc t to be f ree fr om defec ts in work m anship and m aterial, under norm al use and service conditions, f or a period of two y ear s on the Fram e f rom the date of purchas e.
デバイスImpex MSS-1280の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Impex MSS-1280をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはImpex MSS-1280の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Impex MSS-1280の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Impex MSS-1280で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Impex MSS-1280を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はImpex MSS-1280の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Impex MSS-1280に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちImpex MSS-1280デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
