ImpexメーカーSM 4000の使用説明書/サービス説明書
ページ先へ移動 of 28
NOTE: Please read all i nstructions caref ully befor e using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruc tion Parts L ist Warranty Ordering Parts Model SM 4000 Retain This Manual for Reference 07-01-03 OWNER'S MANUAL MARCY SMITH MACHINE SM 4000 IMPEX FITNESS PRODUCTS 14777 DON JULIAN RD.
TA BLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICES..................................................................... 2 SMITH MACHINE HARDW ARE PACK….
IMPORTANT SAFETY NOTICE PRECA UTIONS This exerci se machine is bui lt for optimum safety. How ever , certain precauti ons apply whenev er you operate a piece of exer cise equi pment. Be sure to read the entir e manual before you assembl e or operate y our machine.
SMITH MA CHINE HA RDEWA RE PA CK 3.
SMITH MA CHINE HA RDEWA RE PA CK 4.
SMITH MA CHINE A SSEMBLY INSTRUCTION Tools Required A ssembling the Machine: Tw o Adj ustable Wrenches and A llen Wrenches NOTE: It is strongly recommended tw o or more people assembling this machine to avoid possible inj ury. STEP 1 (See Diagram 1) A.
STEP 2 (See Diagram 2) A.) Attach the r ight Fr ont Vertical Fr ame (#3) to the ri ght Base Frame ( #1). Secure it with tw o M10 x 3” Car riag e Bolts (#76), one 5 1/8” x 2 ¾ ” Bracket (#34) , two Ø ¾ ” W ashers (#66), and tw o M10 Aircraft Nuts (#86).
DIAGRAM2 7.
STEP 3 (See Diagram 3) A.) Attach the R ear Vertic al Beam (#6) to the top of the Cross Br ace (#2). Attach the W eight Gli de Base (#8) to the Cr oss Brace from the Bottom. Alig n the holes. Secure them with tw o M10 x 3” Car riag e Bolts (#76), Ø ¾ ” W ashers (#66), and M10 Air craft Nuts (#86).
STEP 4 (See Diagram 4) A.) Attach the W eight Glide Post ( #7) to the W eight Glide Base (#8) . Secure it w ith f our M10 x 1” Carr iage Bolts ( #74), Ø ¾” W ashers (#66) and M 10 Aircr aft Nuts (#86). B.) Sl ide the Slidi ng W eight Post (#14) onto the Post from the top.
STEP 5 (See Diagram 5) A.) Attach the Butter fly Base (#12) to the front of Rear Vertical Frame (#6). Attach the Butterfly Pull ey Bracket ( #13) to the back of the Rear Vertic al Frame. Ali gn the holes. Secure them wi th two M 10 x 2 ¾ ” Carr iage Bol ts (#75), Ø ¾” W ashers (#66), and M10 Aircraft Nuts (#86) .
CABLE LOOP 11.
STEP 6 (See Diagram 6 & Cable Loop) A.) Attach the 132” Upper Cabl e (#41) to the front opening on the Upper Frame (#9). Attach a Pulley (#57) to the opening . Secure it with one M 10 x 2 ½ ” Allen Bol t (#70), tw o Pulley Bushings ( #62), and one M10 Air craft Nut (#86) .
STEP 7 (See Diagram 7 & Cable Loop) A.) Attach one end of the 87” Butterfly Cabl e to the clip on the Ri ght Butterfly (#11). Draw the Cable to the right Sw iv el Pulley Bracket (#20). B.) Attach a Pulley (#57) to the Bracket. Secur e it w ith one M10 x 1 ¾” Al len Bolt (#69) , two Ø ¾ ” W ashers (#66), and one M10 Airc raft Nut (#86).
STEP 8 (See Diagram 8 & Cable Loop) A.) Attach the 132” Lower Cable (#40) to the opening on the bottom of the Rear Vertical Beam (#6). Attach a Pull ey to the opening . Attach two Pulley Bushi ngs (#62) to the holes outside of the opening. Attach the Foot Plate (#16) to the Bushings.
DIAGRAM 8 15.
STEP 9 (See Diagram 9) A.) N OTE: Help of another person is str ongly recommended fo r this step. Place the Lifting Sleev e (#27) in between the tw o Saf ety Stop Frames ( #26).
EXPLODED DIAGRAM 17.
PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Base Fram e 2 51 2 3/8” Square End Cap 2 2 Cross Brace 1 52 2 ¾” x 2” End Cap 1 3 Front Vertic al Beam 2 53 Ø 1” Cone-s haped End Cap 14 4 Left Vert i.
MULTIPURPOSE BENCH HA RDWA RE PA CK 19.
MULTIPURPOSE BENCH A SSEMBLY INSTRUCTION Tools Required A ssembling the Machine: Tw o Adj ustable Wrenches and A llen Wrenches. NOTE: It is strongly recommended this machine be assembled by tw o or more people to avoid possible inj ury. STEP 1 (See Diagram 1) C.
STEP 2 (See Diagram 2) A.) Attach four Bushi ngs (#27) to a Seat Support Frame (#6) . B.) Attach a Backr est Support (#7) to the rear of the Seat Support Frame (#6) . Alig n the holes and secure them w ith one M10 x 1 ¾” Al len Bolt (#37) and ∅ ¾” W asher (#42).
STEP 3 (See Diagram 3) C.) Place the Backrest Board (#14) onto the Backrest Supports (#7). Secure it with four M 8 x 2” Al len Bolts ( #40) and ∅ 5/8” W ashers (#43). D.) Place the Seat Pad (#13) onto the Seat Suppor t Frames (#6). Secur e it w ith four M8 x 2” Allen Bolts ( #40) and ∅ 5/8” W ashers (#43).
STEP 4 (See Diagram 4) A.) Attach the Leg Dev eloper (#5) to the open bracket on the Mai n Frame (#1). Secur e it w ith an Axle ( #17), tw o M10 x ¾” All en Bolts (#36), and tw o ∅ ¾” W ashers (#42). B.) Insert one Foam Tube (#10) hal fway through the hol e on the Main Frame.
STEP 5 (See Diagram 5) A.) Attach the Ar m Curl Pad ( #15) to the Arm C url Stand (#4) . Secure it w ith two M8 x 5/8” Allen Bolts ( #41) and tw o ∅ 5/8” W ashers (#43). Insert the Arm Cur l Stand into the front opening on the M ain Frame (#1) .
25.
MULTIPURPOSE BENCH PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Main Frame 1 2 Front Stabilizer 1 3 Rear Stabilizer 1 4 Arm Cur l Stand 1 5 Leg Devel oper 1 6 Seat Support Frame 2 7 Backrest Support 2 8 Sl.
IMPEX INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX") warrants this product to be f ree fr om defects in workm ans hip and m aterial, under norm al us e and ser vice c onditions , f or a period of two years on the Fram e f rom the date of pur chas e.
デバイスImpex SM 4000の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Impex SM 4000をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはImpex SM 4000の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Impex SM 4000の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Impex SM 4000で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Impex SM 4000を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はImpex SM 4000の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Impex SM 4000に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちImpex SM 4000デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
