InFocusメーカーIN5100の使用説明書/サービス説明書
ページ先へ移動 of 18
1 IN510 0 Series Networking G uide This guide is only intended to explain Network Functions. For safety , operat ions or any other issu es, re fer to the pr o - jector ’s User ’s Guide or Safety Booklet.
2 Network Functions This projector is equipped with the following network functions. Configuring and Controlling the Pr ojector via a W eb Bro wser Y ou can change the settings of or control the pr ojector via a network by using a web brow ser fr om a PC that is con - nected to the same network.
3 Configuring and contr o lling the pr ojector via a web br o wser Y ou can adjust or control the projector via a network fr om a web browser o n a PC that is connected to the same net - work. NO TE: • Internet Explorer 5.5 or higher or Netscape 6.2 o r higher are r equired.
4 Below are the factory default settings for ad ministra tor IDs, user I Ds and passwor ds. Item ID Pa s sw o rd Administrator ID Administrator <blank> User ID User <blank>.
5 Settings Refer to the following for configuring or co ntrolling the pr ojector via a web bro wser . Example: If the IP address of th e pr ojector is set to 192.168.1.10: 1 Enter [http://192.168.1.10] into the address bar of the web br owser an d the screen below will be display ed.
6 Network Inf ormation NO TE: All screen images shown in this document are scr een s of a lo gon using an Administ rator ’s ID. Any Adminis - trator-o nly functions will not be displayed when usi ng a User ID. Displays the projector ’s cu rrent network configuration.
7 Netw ork Setting Displays and configures network settings. NO TE: • The new configuration settings are activated after re star ting the network connection. When the configuration set - tings are changed, you must r estart the network connectio n. Y ou can restart the network connection by clicking [Network Restart ] on the main menu.
8 Mail Settings Click the [Apply] button to save the settings. NO TE: • Y ou can confirm whether the mail settings work corr ectly using the [Send T est Mail] button. • If you connect the pr ojector to an existing network, consult a network ad ministrator befor e setting server addresses.
9 Aler t Settings Clicking each Alert brings up a dialog box wher e you can specify that an email be sent to alert the appr opriate person - nel that an error has occurr ed. Subject can be 255 characters, T ext can be 1024 characters. Item Description Lamp won’ t strike Lamp won’ t turn on after 5 attempts.
10 Schedule Settings Click the [Apply] button to save the settings. T o add additional functi ons and events cl ick the [Add] button and set the following items. Click the [Registe r] button to add new commands to the Schedule List. Click the [Delete] button to delete commands fro m the Schedule list.
11 Date/Time Settings Click the [Apply] button to save the settings. NO TE: The new configuration settings are activated after r estarting the network connection. The network connection must be restarted when the configuration settings are change d, The network connection can be r estarted using [Network Restart] on the main menu.
12 • The Internal Clock’s time may not remain accurate. Using SNTP is r ecommended to maintain accurate time. Security Settings Click the [Apply] button to save the settings. NO TE: • The new configuration settings are activated after re st arting the network connecti on.
13 Pr ojector Control NOTE: For detail about pr ojector contro l functions, see the pr ojector’ s User’ s Guide. Item Description Main Basic proj ector commands including pow er on/off and changing source. Picture Pic ture settings including k eystone, contrast, and brightness.
14 Pr ojector Status Item Description Err or D isplays the current error status Lamp Time Displa ys the usage time for the curr ent lamp . T otal Lamp Hours Displa ys the usage time for the all lamps Filter Time Displa ys the usage time for the curr ent filter .
15 Netw ork Restart NO TE: Restarting requir es you to r e-log on to contr ol or configure the pr ojector . Failur e and W arning Aler ts via E-mail The projector can automatically send an alert to specified e- mail ad dresses whe n the pr ojec tor requir es maintenance or has encountered an err or .
16 Subject line: T est Mail <Projector name> Te x t : S e n d Te s t M a i l Date <T es ting date> T ime <T esting time> IP Address <Projector IP addr es s> MAC Address <Pr ojector MAC addr ess> 3 Configure the Failure/W arning Alerts via E-mail settings.
17 Pr ojector management via SNMP NO TE: • It is recommended that SNMP functions be carried out by a network administrator . • SNMP management software must be installed on the computer to monitor the projector via SNMP . SNMP Settings Configure the following items via a web br owser to use SNMP .
18 Contr olling the projector via scheduling The project or can be automatical ly contr olled via scheduling. NO TE: • Y ou can schedule the following contro l events: Power ON/OFF , Input Source . • There ar e 3 types of Scheduling, 1) daily 2) day of the week 3) specific date.
デバイスInFocus IN5100の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
InFocus IN5100をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはInFocus IN5100の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。InFocus IN5100の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。InFocus IN5100で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
InFocus IN5100を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はInFocus IN5100の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、InFocus IN5100に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちInFocus IN5100デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。