InFocusメーカーX7の使用説明書/サービス説明書
ページ先へ移動 of 37
Ref er enc e Guide X6 X7.
1 ... English Table of Contents T able of Contents ......................................................................................... 1 Usage Notice ...............................................................................................
2 English ... Usage Notice Precautions Follow all warnings, precautions and maintenance as recom- mended in this user’s guide to maximize the life of your unit. Warning- Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes.
3 ... English Usage Notice Do: Turn off the product before cleaning. Use a soft cloth moistened with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
4 English ... Usage Notice Important Operating Considerations for Safety Place the projector in a horizontal position no greater than15degreesoffaxis. Locate the projector in a well-ventilated area without any obstructionstointakeorexhaustvents.
5 ... English Introduction Product Features This product is a SVGA/XGA single chip 0.55” DLP ® projec- tor. Outstanding features include: TrueSVGA,800x600addressablepixels TrueXGA,1024x768addressablepixels Single chip Dark Chip2 TM DLP ® technology NTSC/NTSC4.
6 English ... Introduction Power Cord VGA Cable Wireless Remote Controller Projector with lens cap Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immedi- ately if anything is missing.
7 ... English Introduction 1. Power 2. Remote Controller 3. IR Receiver 4. Zoom and Focus Lever 5. Speaker 6. Lens 7. LensCap Main Unit Product Overview 1 2 4 6 7 5 3.
8 English ... Introduction Connection Ports 1. Computer Input Connector 2. Video 1: S-Video Input Connector 3. Video 2: Composite Video Input Connector 4. Serial Control Connector 5. Monitor Output Connector 6. AudioInputConnector 7. PowerSocket 8.
9 ... English Introduction Wireless Remote Control # Icon Function Description 1 Power Refer to the “Power On/Off the Projector” section on pages 12-13. 2 Display Mode SelectthedisplaymodefromPC, Movie,sRGB,GameandUser.
10 English ... Introduction 5 Keystone Correction Adjust the image to compensate for distortion caused by tilt- ing the projector (vertical ± 15 degrees). 6 Source Press“source”tochooseRGB, Component,S-Video,Composite and HDTV sources.
1 1 ... English Operation Connecting the Projector Due to the difference in applications for each country,someregions may have different accessories. Toensuretheprojectorworkswellwithyourcomputer, please make sure the timing of the display mode is compatible with your projector.
12 English ... Operation Powering On the Projector 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected.ThePowerLEDwillturnashblue. 3. Turn on the lamp by pressing “Power/Standby” on the control panel.
13 ... English Operation Powering Off the Projector 1. Pressthe“Power/Standby”toturnofftheprojectorlamp, you will see a message as below on the on-screen display. 2. Pressthe“Power/Standby”againtoconrm.
14 English ... Operation Warning Indicator When the “Power” LED i ndicatorturnsred,itindicatesthe projector has overheated. The projector will auto matically shut itself down.
15 ... English Operation Adjusting the Projected Image Adjusting the Height of Projector Image The projector is equipped with elevator feet for adjusting the height of image. To raise/lower the image: 1. Use tone-tunethedisplayangle .
16 English ... Operation Max. 27.5"(69.8cm) 75.7" (192.3cm) 126.2"(320.5cm) 176.7"(448.7cm ) 227.1"(576.9cm) 302.8"(769.2cm ) Min. 30.3"(76.9cm) 68.7" (174.4cm) 114.4" (290.7cm) 160.2"(407.0cm) 206.0"(523.
17 ... English User Controls The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. ToopentheOSDmenu,press“Menu”ontheRemoteControl.
18 English ... User Controls Image (PC Mode) Display Mode There are many factory presets optimized for various types of im- ages. PC: For computer or notebook. Movie: For home theater. sRGB: For standard color. Game: For game. User: Memorize user’s settings.
19 ... English User Controls Frequence “Frequence” changes the display data frequency to match the fre- quencyofyourcomputer’sgraphiccard.Ifyouexperienceavertical ickeringbar,usethisfunctiontomakeanadjustment.
20 English ... User Controls Image (Video Mode) Display Mode There are many factory presets optimized for various types of im- ages. PC: For computer or notebook. Movie: For home theater. sRGB: For standard color. Game: For game. User: Memorize user’s settings.
21 ... English User Controls Color Adjust a video imge from black and white to fully saturated color. Press the to decrease the amount of color in the image. Press the to increase the amount of color in the image. Tint Adjust the color balance of red and green.
22 English ... User Controls Display Setting Keystone Adjust image distortion caused by tilting projector. (±15 degrees). H-Position (Horizontal Position) Press the to move the image left. Press the to move the image right. V-Position (Vertical Position) Press the to move the image down.
23 ... English User Controls Projection Front-Desktop The factory default setting. Rear-Desktop Whenyouselectthisfunction,theprojectorreversestheimage so you can project behind a translucent screen.
24 English ... User Controls Source Lock Whenthisfunctionisturned“Off”,theprojectorwillsearchfor other signals if the current input signal is lost. When this function is turned“On”,itwillsearchspeciedconnectionport.
25 ... English User Controls Audio Mute: Choose “On” to mute the volume. Choose “Off” to restore the volume. Volume: Press the to decrease the volume. Press the to increase the volume. Lamp Reset Reset the lamp life hour after replacing a new lamp.
26 English ... User Controls Language Choose the multilingual OSD menu. Press into the sub menu and then use the or or or key to select your preferred language.
27 ... English User Controls Information To display the projector information on the screen. Information.
28 English ... Appendices Problem: No image appears on screen Ensure all the cables and power connections are correctly and securely connected as described in the “Operation” section. Ensure the pins of connectors are not crooked or broken.
29 ... English Appendices 4. Verifytheresolutionsettingislessthanorequalto1280x1024 resolution. 5. Select the “Change” under the “Monitor” tab . 6. Clickon“Showalldevices”.
30 English ... Appendices Problem: Image has vertical ickering bar Use “Frequence” to make an adjustment. Checkandrecongurethedisplaymodeofyourgraphiccardto make it compatible with the product.
31 ... English Appendices Problem: LED lighting message Steady light => No light => Message Power-LED (Blue) (Red) (Purple) Standby (Input power cord) Flashing (0.5sec.) Power on (Warming up) Lamp lighting (Displaying) Power off (Cooling-I) Power off (Cooling-II) Flashing (0.
32 English ... Appendices Problem: Message Reminders Overtemperature-theprojectorhasexceededitsrecommended operating temperature and must be allowed to cool down before it may be used. Replacingthelamp-thelampisabouttoreachitsmaximumlife - time.
33 ... English Appendices Replacing the lamp The projector will detect the lamp life itself. It will show you a warning message Only InFocus lamps are tested with this projector. Use of otherlampsmaycauseelectricalshockandre.
34 English ... Appendices Warning: To avoid burns,allowtheprojec - tor to cool for at least 60minutesbeforeyou replace the lamp! Warning: To reduce the riskofpersonalinjury, do not drop the lamp module or touch the lamp bulb.
35 ... English Appendices Compatibility Modes VGA Analog - PC Signal Modes Resolution V.Frequency (Hz) H.Frequency (kHz) VGA 640x480 60 31.50 640x480 72 37.90 640x480 75 37.50 640x480 85 43.30 720x400 70 31.50 720x400 85 37.
36 English ... Appendices Modes Resolution V.Frequency (Hz) H.Frequency (kHz) 640x480 66.6(67) 34.93 800x600 60 37.90 1024x768 60 48.
デバイスInFocus X7の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
InFocus X7をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはInFocus X7の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。InFocus X7の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。InFocus X7で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
InFocus X7を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はInFocus X7の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、InFocus X7に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちInFocus X7デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。