AmeriphoneメーカーVCOの使用説明書/サービス説明書
ページ先へ移動 of 26
® VCO DIALOGUE VCO Operating Instructions Hearing Loss Help Company (508) 755 1120 VOICE 530 7069997 Fax email: hearingLossHelpCo@Hearing-Loss-Help-Co.
When using your telephone equipment, always follow basic safety precautions to reduce the risk of fire, electric shock, and injur y to persons, including the following: 1. Read and understand all instructions. Obser ve all warnings and other markings on the product.
Introducing the Dialo gue VCO ............................................................................................................2 W arranty Ser vice ............................................................................................
Introducing the Dialogue VCO Thank you for selecting the amplified telephone Dialogue VCO from Ameriphone. These Operating Instructions and the associated Quick Operating Guide provide you with the information you need to use your Dialogue VCO effectively and safely .
Features on the Dialogue VCO RINGER volume switch AUDIO OUTPUT jack A/C adapter and phone line connection T ONE/PULSE switch RELA Y button RELA Y MESSA GE button AUT O ANSWER button LCD display screen.
Setting up Your Dialogue VCO There are three steps involved in set- ting up your Dialogue VCO. • Insert four AA rechargeable NiCad batteries for back-up in case of AC power outage. • Decide if you want the phone to sit on a desk or hang on the wall.
Setting up Your Dialogue VCO (continued) 3. Lift the handset and listen for a dial tone. The phone is ready to use. W all Mount : 1. Pull the handset hook out as shown in Figure 5 and reverse its position so that the hook points up and will hold the handset when you hang up.
Using Your Dialogue VCO frequency you need to boost. T o iden- tify the sound frequency range that best suits your needs, follow these steps: 1. When you hear a voice on the line, press the AMPLIFY button as shown in Figure 8. 2. Adjust the T ONE slide control as in Figure 10 to suit your hearing.
Using Your Dialogue VCO (Continued) Hold T o put the line on hold, press the HOLD button and return the handset to its cradle. In telephone mode, the screen shows “ CALL-ON HOLD & MUTE ” . In text mode, it shows and transmits the message “ PLS HOLD …” .
Special Features Pr ogramming the Rela y Ser vice Number 1. Lift handset and press PROG button. 2. Enter the phone number on the keypad. 3. Push RELA Y button to store the number . Hang up immediately . Unansw ered Call Indicator If an incoming call is not answered by a person after 4 rings, the unan- swered call indicator will flash.
Pr ogramming Emergency Calling Messag e/Y our Home Phone Number and Long Distance Carrier T o Pr o gram : 1. Lift handset and press PROG button and then button. 2. Enter your local emergency ser vice number , (or 911, if available), up to 14 digits. Press to save.
memor y buttons shown in Figure 24. Each button can be programmed (or reprogrammed using the same proce- dure) for a phone number up to 15 digits long. T o Pr o gram a Button, F ollo w these Steps : 1. Lift the handset and press PROG as shown in Figure 25.
3. Press a memor y button (Figure 24) to store this number on that button. 4. Immediately hang up the handset. Note: Any number previously stored at that button number will be over written. 5. T o change a stored number , repeat the programming process starting with step 1.
called V oice-T o-V oice Relay or VTV . Contact your local relay ser vice for more information. The relay ser vices var y from state to state, and the procedures using the VCO phone may var y slightly . Follow the steps below to determine which procedure you should use for your local relay ser v- ice.
3. When connected, read incoming messages on display and start speaking when "GA" appears. Say "go ahead" when you're done and it's the other person's turn to talk. 4. Continue your conversation by reading and talking.
2. Dial the number you're calling on the keypad (if you make a mistake, press PR OG to go back one space to erase the incorrect number), f o l - lowed by pressing the * and # keys (this will type "GA" .) 3. When connected, proceed with your call by reading and talking.
4. The phone sends and displays this message on the screen; “I AM A VCO USER, PLS CALL (number stored in memor y button selected), GA ” . Y ou don ’ t need to voice the phone number . If necessar y , press the same memor y button to repeat the message.
T o type a TTY message, use the keys of the keypad and their corresponding letters (i.e. number 2 is also for letters A, B, and C). On the screen, watch the character above the cursor change as you repeat- edly press the same key . When the desired letter is shown, wait one second for the cursor to advance to the next space.
T o Pla yback Recor ded Messa g es : 1. The screen will indicate the number of messages you have received. 2. Press 1 to read your messages. Or press 1 again to fast for ward to the next message. When finished, press 2 to erase messages. 3. Press 3 to turn off the answering machine.
Direct Audio Output The AUDIO OUTPUT socket allows you to connect the Dialogue VCO to a hearing aid, neck loop, cochlear implant or other assistive listening devices. T o use this por t, plug in a compatible auxiliar y cable and connect it to your assistive listening device.
Connecting to the Q-90 Printer The Dialogue VCO can be used with the Q-90 Printer from Ameriphone. Attach the Q-90 Printer cable to the connector on the back of the Dialogue VCO.
20 SYMPT OM Screen remains blank No dial tone Letters do not appear when pressing keypad No number dialed when memor y button pressed Nothing happens when RELA Y is pressed Garbled message on screen Call cannot be dialed, or is dialed slowly Dialogue VCO does not have an audible ring CAUSE AND CORRECTIVE A CTION No power .
The DIALOGUE VCO has been registered with the Federal Communications Commission (FCC) and complies with the standards in Part 68 of the FCC Rules. FCC compliant telephone cords and modular plugs are provided with this telephone.
22 Warranty the above exclusions or limitations may not apply to you. T o get warranty ser vice for your DIALOGUE VCO , you must provide proof of the pur- chase date. Within 30 days of the date of purchase, return your DIALOGUE VCO to the place where you purchased it for immediate replacement.
Specifications Maximum gain High frequency (3 kHz): 30 dB Wide band (300 to 3000 Hz): 20 dB T one contr ol range Full range: 300 to 3000Hz using one slide control.
Connecting for Desk or W all Mount Desktop Use ..........................4 W all Mount ..........................5 Direct Audio Output ..................18 Features ......................................3 Flash ........................................
デバイスAmeriphone VCOの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Ameriphone VCOをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAmeriphone VCOの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Ameriphone VCOの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Ameriphone VCOで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Ameriphone VCOを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAmeriphone VCOの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Ameriphone VCOに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAmeriphone VCOデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
