iogearメーカーGMFPSU22W6の使用説明書/サービス説明書
ページ先へ移動 of 32
1 GMFPSU22W6 P ART NO. M0389 Installation Installation Guide USB 2.0 Hi-Speed 2-Port Multifunction Print and Storage Server User Manual.
3.
3 Introduction Thank you for purchasing the IOGEAR GMFPSU22W6 2 Port USB 2.0 Multifunction Print and Storage Server (hereafter r eferred to as “server”).
4 5 About this Manual This manual provides intr oductory information as well as detailed instructions on how to set up and man - age the IOGEAR GMFPSU22W6 in various network environments. T o fully benet from this document, you should be familiar with basic networking principles.
4 5 T able of Contents Package Contents 6 Physical Description 7 Hardwar e Installation 9 Software Installation 10 Conguring the Server IP 18 Printer/Fax/Scanner Setup (Virtual USB) 21 Storage Setu.
6 7 Package Contents V erify that nothing is missing fr om the package by using the checklist below . Please contact your dealer if anything is missing or damaged.
6 7 Physical Description 1. Power Adaptor Connector: DC IN 12V/1A adapter 2. Init Button: restor es all settings to default values 3. Ethernet Connector: a twisted pair category 5 cable 4. USB Host Ports: USB 1.1/2.0 low , full, and hi-speed compliant 5.
8 9 Indicator Behavior Description Power Lit Power On Not lit Power off/System error Link Lit Network connected Not Lit No physical connection to network Status Blinking Activity on network Not lit No.
8 9 Hardwar e Installation Make sure that your USB devices ar e switched off and that the server’ s power adapter is disconnected. Connect the print and/or storage devices to the server’ s USB ports. Connect the server to the network with the included Ethernet cable.
10 11 Software Installation Insert the Software CD into your computer . A splash screen should appear with a menu of options. Click on the words Install Application to set up the server’ s Control Center softwar e.
10 11 Click Next to continue the installation wizard..
12 13 T ype your name and organization to personalize the installation of the Control Center softwar e, then click Next to continue..
12 13 Click Change … if you would like to install the software to somewher e besides the default location, then click Next to continue..
14 15 Click In stall a nd wait a mome nt for the Cont rol Center s oftwar e to nish l oading..
14 15 Click Fi nish to exit t he inst all wiz ard and launch t he Cont rol Center softwar e f or the rst tim e..
16 17 If you have a software r ewall you may be alerted that the Control Center is being blocked. Make sure that you unblock the Contr ol Center or you may experience difculty using your server .
16 17 After a moment your print server should appear in the server list. Click the server name once and any attached devices should be listed be- low it. This means your Control Center softwar e is installed properly . Y ou may close the window using the X in the top right corner and the Control Center will continue to run in the back- ground.
18 19 Y ou may wish to manually assign an IP address to the server in some cases. For example, if you do not have a DHCP server on the network. Most users who have a router that acts as a DHCP server can skip this section, however . T o congure the server IP , double click on the server in the Control Center’ s server list.
18 19 At the prompt, enter the administrator username (default: admin) and password (default: admin). Co n g u r i n g t h e S e r v e r I P.
20 21 After you have logged in successfully , select the TCP/IP tab. Here you may select Static IP and manually congure all network settings for the server .
20 21 P r i n t e r /F a x /S c a nn e r S e t u p (V ir t u al U S B ) Y our print server supports a technology called Virtual USB in addition to more traditional print server ports. A Virtual USB connection allows your printer software to think the printer is con- nected directly to your computer , for maximum compatibility .
22 23 Y our printer should be detected and installed au- tomatically at this point. Y ou can repeat this setup procedure on all your computers as needed. One weakness of the Virtual USB technology is that only one computer can be connected to the printer at a time.
22 23 S t o r a g e S e t u p ( W i n d o w s F i l e S h a r i n g / S M B ) Storage devices attached to your server are ac- cessible through Windows File Sharing and FTP protocols. For local network access, Windows File Sharing is the preferr ed method.
24 25 Storage Setup (Virtual USB) T o gain full control of NTFS disks you will need to use the Virtual USB mode for storage devices. In this mode only one computer has access to a disk at a time, but any disk operation is possible including formatting or partitioning.
24 25 T o turn on Virtual USB mode, open the Control Center software and double click on the server name in the list. Enter the administra - tor username (default: admin) and password (default: admin) at the prompt. Switch to the Supported Protocols tab.
26 27 Once this is done, you may connect or discon - nect from storage devices in the same way you would a printer . Simply open the Control Center interface, select a storage device and click the Connect button in the toolbar . The storage device will be detected as if plugged directly into a USB port on your computer .
26 27 When you are done using the drive, click the Safely Remove Hardwar e icon in the tray area by your clock to prevent further communication with the drive and help protect against data loss. Once this step is completed you may use the Control Center softwar e to disconnect the drive and allow others to connect to it.
28 29 Restore Factory Defaults If you are having difculty nding or connecting to your print server using the Contr ol Center software due to network issues or a forgotten password, you can clear all settings on the server using the Init button on the device.
28 29 Should you requir e any technical assistance, call toll-free: 866-9-IOGEAR (866-946-4327) or visit our website at http://www .iogear .com for the latest product information and support les. This document is subject to change without prior notice.
30 31 Radio & TV Interference Statement WARNING!!! This equipment generates, uses and can radiate radio fr equency energy and, if not installed and used in accordance with the instruction manual, may cause interfer ence to radio communications.
30 31 Limited W arranty IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT , INDIRECT , SPECIAL, INCIDEN - T AL OR CONSEQUENTIAL DAMAGES RESUL TING FROM THE USE OF THE PRODUCT , DISK, OR ITS DOCUMENT A TION EXCEED THE PRICE P AID FOR THE PRODUCT .
© 2007 IOGEAR, INC. FUN IOGEAR offers connectivity solutions that ar e innovative, fun, and stylish, helping people enjoy daily life using our high technology products. GREEN IOGEAR is an environmentally conscious company that emphasizes the importance of conserving natural resour ces.
デバイスiogear GMFPSU22W6の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
iogear GMFPSU22W6をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはiogear GMFPSU22W6の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。iogear GMFPSU22W6の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。iogear GMFPSU22W6で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
iogear GMFPSU22W6を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はiogear GMFPSU22W6の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、iogear GMFPSU22W6に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちiogear GMFPSU22W6デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。