IOGearメーカーiogearの使用説明書/サービス説明書
ページ先へ移動 of 30
Installation Installation Guide 2-Port USB Dual-Link DVI-D Cable KVM Switch with Audio and Microphone Support GCS982U P ART NO. M1196.
.
3 T able of Contents Package Contents 4 System Requirements 5 Overview 6 Standard Installation 7 Advanced Installation 9 LED Indication 12 Port Switching 13 Hotkeys Summary T able 14 Autoscan Interval.
4 Package Contents • 1 x 2-Port USB Dual-Link DVI-D Cable KVM Switch • 1 x Remote Switch Button • 1 x Installation Guide • 1 x W arranty Card.
5 System Requirements Console • DVI-D supported monitor • USB keyboard and mouse • Powered speakers and micr ophone (optional) Computers • T wo USB ports • A DVI-D supported connection • 3.
6 2-Port USB Dual-Link DVI-D Cable KVM PC2 PC1 Overview 1. LEDs 2. Console DVI-D Video Port 3. Console USB Mouse Port 4. Console USB Keyboard Port 5. Console Mic. Port 6. Console Audio Port 7. Remote Switch Button Port 8. Remote Switch Button 1 2 7 8 9 10 11 12 13 3 4 5 6 9.
7 Step 1 Please make sure your computers and monitor are power ed off before you start. Step2 Connect the DVI cable from your monitor to the console DVI monitor port. Then, turn on the monitor . Step 3 Connect your USB keyboard and mouse to the console USB keyboard port and console USB mouse port.
8 Step 4 Connect your powered speaker and mic. to the console audio port and console mic. port. Step 5 Connect a set of your molded KVM cable to each of your computers – DVI cable to the DVI output, USB cables to open USB ports from your computer , audio cable to your audio output and mic.
9 Step 1 Please make sure your computers and monitor ar e powered of f before you start. Step2 Connect the DVI cable from your monitor to the console DVI monitor port. Then, turn on the monitor . Step 3 Connect your USB keyboard to the console USB keyboard port.
10 Step 4 Connect a powered USB hub to the console mouse port, then connect the mouse to any available USB port in the hub. Then, connect any peripherals that you want to share between your computers to the other available USB ports in the hub. Note: Please make sure mouse emulation has been disabled for this setup to function correctly .
11 Step 6 Connect a set of your molded KVM cable to each of your computers – DVI cable to the DVI output, USB cables to open USB ports from your computer , audio cable to your audio output and mic. cable to the mic. input. 2-Port USB Dual-Link DVI-D Cable KVM PC2 PC1 Final Step T ur n on your computers.
12 LED Indication - LED will light up in Green showing the port that can be contr olled by the console. - Both LEDs will be ashing together when the KVM is in Firmware Upgrade Mode.
13 Y ou can switch ports via remote switch button, mouse or hotkey commands. Port Switching via Remote Switch Button Simply press the r emote switch button once to switch focus to the next port. Port Switching via Mouse Simply press scr oll wheel button twice rapidly to switch focus to the next port.
14 Hotkeys Summary T able Hotkey combination Description [Scroll Lock] [Scroll Lock] + or [Ctrl] [Ctrl]* + *Note: If alternative hotkey sequence is chosen [Enter] Switch KVM and audio focus to the next port [k] [Enter] Switch KVM focus to the next port [s] [Enter] Switch audio focus to the next port [a] [Enter] Activate Autoscan Mode.
15 Hotkey combination Description [Scroll Lock] [Scroll Lock] + or [Ctrl] [Ctrl]* + *Note: If alternative hotkey sequence is chosen [F4] [Enter] List out current settings Note: Please have a Notepad or word document opened before you trigger this function.
16 Autoscan Interval T able n Description 1 3 seconds 2 5 seconds (default) 3 10 seconds 4 20 seconds.
17 The PC compatible (101/104 key) keyboard can emulate the functions of the Mac keyboar d. The emulation mappings are listed in the table below . Mac Keyboard Emulation *Note: When using key combinations, press and r elease the rst key (Ctrl), then press and release the second key .
18 Sun Keyboard Emulation The PC compatible (101/104 key) keyboard can emulate the functions of the Sun keyboar d. The emulation mappings are listed in the table below .
19 Factory Default Settings Function Default Setting Autoscan Interval 5 seconds Hotkeys [Scroll Lock] [ Scr oll Lock] Keyboard Operating Platform PC compatible Mouse Emulation On Mouse Port-Switching.
20 Firmware Upgrade Note: In order to perform a rmwar e upgrade, you need to use a computer that’ s not connected to the KVM. Step 1 Go to www .iogear .com to download the latest available rmware or the specic rmwar e that you wish to upgrade to.
21 Step 4 Windows will now install all the required drivers. Y ou may see the below message in the system tray icon area. Step 5 After you see the below message “Y our new hardwar e is installed and ready to use.”, extract the downloaded le with WinRAR or compatible software.
22 Step 6 Read the License Agreement and click “I Agr ee” then click “Next” if you wish to continue with the rmware upgrade. Otherwise, click “Cancel” to exit. Step 7 Choose the correct KVM that you wish to perform rmware upgrade from the “Device List” and then click “Next” to continue.
23 Step 8 If you have checked the “Check Firmware V ersion” checkbox, then the utility will check the cur - rent rmwar e that is on your KVM. If the current rmware is newer than the rmwar e that you wish to upgrade to, you will be prompted and asked if you wish to proceed.
24 Upgrade Fail If the upgrade fails to complete, unplug the 2 USB connections from your computer that has performed the rmware upgrade. Then, r epeat the rmware upgrade process by following the procedur e of Firmware Upgrade section starting from step 3.
25 Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pr ovide reasonable protection against harmful inter - ference in a r esidential setting.
26 This device has been tested and found to comply with the following European Union dir ectives: Electro- magnetic Capability (89/336/EMC), Low V oltage (73/23/EEC) and R&TTED (1999/5/EC).
27 The following contains information that relates to China. SJ/T 11364-2006 部件名称 有毒有害物质或元素 铅 (Pb) 汞 (Hg) 镉(Cd) 六价 (Cr(VI)) 多溴联苯 (PBB) 多溴二苯.
28 Limited W arranty WE’RE HERE TO HELP YOU! NEED ASSIST ANCE SETTING UP THIS PRODUCT? Make sure you: 1. Use the live chat at www .iogear .com to try and solve any issues you may be having with the product 2. Visit the T ech Info Library/F AQ on www .
29 IOGEAR 19641 Da Vinci, Foothill Ranch, CA 92610 P 949.453.8782 F 949.453.8785 Visit us at: www .iogear .com Contact © 2011 IOGEAR ® Part No. M1196 IOGEAR, the IOGEAR logo, are trademarks or register ed trademarks of IOGEAR. Microsoft and Windows are registered trademarks of Microsoft Corporation.
© 2011 IOGEAR ® FUN IOGEAR offers connectivity solutions that ar e innovative, fun, and stylish, helping people enjoy daily life using our high technology products. GREEN IOGEAR is an environmentally conscious company that em p ha s iz e s t he importance of conserving natural resources.
デバイスIOGear iogearの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
IOGear iogearをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはIOGear iogearの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。IOGear iogearの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。IOGear iogearで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
IOGear iogearを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はIOGear iogearの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、IOGear iogearに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちIOGear iogearデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。