IOGearメーカーm1281の使用説明書/サービス説明書
ページ先へ移動 of 28
www .iogear .com User Manual Wireless 1080p Computer to HD Display Kit GUWA VKIT4B P ART NO. M1281.
© 2014 IOGEAR ® Part No. M1281 IOGEAR, the IOGEAR logo, are trademarks or registered trademarks of IOGEAR. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other brand and product names are trademarks or registered trademarks of their respective holders.
3 T able of Contents Introduction 4 Package Contents 4 Requirements 4 Overview 5 Software Installation - Windows 6 Hardware Installation 9 Using the IOGEAR Wireless Software - Windows 11 1. Introducing the UWB Connection Manager Software 11 2. Adjusting Video Settings 14 3.
4 Package Contents Requirements 1 x Wireless A / V Receiver 1 x Wireless USB T ransmitter 1 x Power Adapter 1 x User Manual 1 x W arranty / Registration Card 1 x Installation CD PC: • Intel 2.2GHz processor (2.4GHz Recommended) with 2GB (3GB Recommended) of system memory (RAM) • Windows ® 7, Windows ® 8.
5 Overview Receiver Base Front View 1. Signal Indicator Light 2. Wireless Connection LED light Receiver Base Back View 1. DC Power Input 2. HD Port 3. D-Sub 15Pin (VGA) 4.
6 Software Installation - Windows The installation checks the PC capabilities and compares them to the minimum system requirements of the system. For Windows 7, it is recommended to run WEI (Windows Experience Index) calculation prior to installation.
7 Uninstalling the Software (2) Methods: Method 1 1. In the event that you need to uninstall the software, insert the installation CD. Once the Modify Setup screen appears, click “ Uninstall .” Note: The Modify Setup screen will only appear if the GUW A VKIT4B is already installed on your PC.
8 Method 2 1. Go to your Control Panel on your PC and then select “Programs and Features” to uninstall the following program: GUW A VKIT4B ..
9 3. Connecting a TV , Monitor or Projector 1. Y ou can connect a digital (HD) or analog (VGA) monitor to the Receiver Base. Only one monitor can be connected to the HD Adapter at a time. 2. Connect an HD or VGA Cable to the HD or VGA port on the Receiver Base 3.
10 4. Connecting Audio Devices 1. The Wireless USB Device Adapter provides one 3.5mm port, as shown in the illustration on the last page. 5. Set-Up Complete 1. The default conguration for the external monitor connected to the Receiver Base is in the Extend mode (an extension of the image on the computer to a second screen).
11 This section provides information on using the following software to manage the IOGEAR Wireless Software to adjust settings to suit your needs: 1. UWB Connection Manager 2. Adjusting Video Settings 3. Adjusting Audio Settings Using the IOGEAR Wireless Software - Windows A.
12 B. Connecting the GUW A VKIT4B to your computer: The UWB Connection Manager display window will show the GUW A VKIT4B on the Devices tab as Not Connected. Simply click on the Connect button to establish a connection. It will take approximately 15 seconds for the Drivers to load upon rst connection.
13 E. Radio Communications T o change / select the channel used for radio communication: The Communications tab of the UWB Connection Manager enables you to view and change the radio settings. The default channel setting is Automatic, which enables the host radio to automatically locate an available channel for communications.
14 2. Adjusting Video Settings A. Selecting Extended mode or Mirror mode Y ou can choose to set the video output signal to Extend mode or Mirror mode. The default setting is Extend mode. Extend mode extends your desktop space across multiple monitors, so that you can display different information on each monitor connected to your computer .
15 B. Conguring the Display 1. Conguring the Display in Windows 7 a. In Windows 7, there is a built in support for external monitor . T o use it press the [Windows] key together with the [P] key( + [P]), and then the following menu will appear: 1) For Mirror mode : choose Duplicate 2) For Extend mode : choose Extend b.
16 T o change any of the external display settings: Select the appropriate display name in the Display scroll down options. Y ou should select the name of the TV or monitor or projector connected to your Receiver Base. Select the desired value in any of the available settings: - Resolution: your external display resolution.
17 Select Video Setup to congure screen resolution or any other display options. The following window will appear: T o change any of the external display settings: Select the appropriate display name in the Display scroll down options. Y ou should select the name of the TV or monitor or projector connected to your Re- ceiver Base.
18 3. Adjusting Audio Settings A. Conguring audio ports Y ou can playback audio either through the Receiver Base’s audio port or the PC’s audio port. However , you cannot use the audio ports on the PC and on the GUWA VKIT4B at the same time. By default, the audio ports on the GUW A VKIT4B are automatically enabled each time you connect.
19 2. In Windows 8.x: a. Right click the V olume icon in the System T ray and select Playback devices . b. In the Playback tab, select USB AUDIO speakers. c. Then click Set Default to set it as your default speakers. d. Click OK to save the new setting.
20 T roubleshooting This section provides answers for problems you may encounter when using your GUW A VKIT4B. If you need to contact IOGEAR, you will nd information regarding IOGEAR’s support services at the end of this section.
21 D. The external monitor connected to the Receiver Base shows only the wallpaper background of your Windows® desktop. 1. The default conguration for the external monitor connected to the Receiver Base is in the Extend mode (an extension of the image on the computer to a second screen).
22 J. Mirror mode is not available (grayed out). 1. Mirror mode is not available if the external monitor connected to the Receiver Base is set as the primary display . 2. T o enable Mirror mode, set the computer ’s built-in display as the primary display in the Windows Display Properties dialog box.
23 A. There is no sound coming from the external audio device connected to GUW A VKIT4B. 1. Check and adjust the volume settings. 2. Make sure the cable connecting the audio device to the Receiver Base’s audio output is secure.
24 A. USB device does not work. 1. Make sure the GUWA VKIT4B is connected to your computer and the computer is docked (indicator light on GUW A VKIT4B is green). 2. Check that the cable connection between the USB port on the Receiver Base and the USB device is secure.
25 Specications Function GUW A VKIT4B Audio Audio Output 2 Channel 16-bit DAC Sample Rate 48KHz, 16-bit either from 3.5mm stereo jack or HDMI connector Console Connectors Audio 1 x 3.
26 Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential setting.
27 WE’RE HERE TO HELP YOU! NEED ASSIST ANCE SETTING UP THIS PRODUCT? Makesureyou: 1.Visit www .iogear .com formoreproductinformation 2.Visit www .iogear .com/support forlivehelpandproductsupport W arrantyInformation Thisproductcarriesa1Y earLimitedWarranty .
© 2014 IOGEAR ®.
デバイスIOGear m1281の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
IOGear m1281をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはIOGear m1281の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。IOGear m1281の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。IOGear m1281で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
IOGear m1281を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はIOGear m1281の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、IOGear m1281に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちIOGear m1281デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。