iOptronメーカー8403の使用説明書/サービス説明書
ページ先へ移動 of 32
SmartStar ® -E Series Mount and Telescopes (For 8500, 8502, 8503 and 8504) Instruction Manual.
2 Table of Content Table of Content .............................................................................................................. 2 1. SmarStar ® -E Series Ov erview ...................................................................
3 5.9. Set Telesc ope Coord. ......................................................................................... 20 5.10. Park Scope ....................................................................................................... 20 6. Maintenance and Servicin g .
1. SmarStar ® -E Series Overview 1.1. SmartStar ® -E Series Features Alt-Azimuth Mount– The Cube™ The SmartStar ® -E series come with our patented Alt-Azimuth (AltAzi) mount, a.k.a . The Cube™. This compact mount design is probably the most functional and flexible unit on the market.
5 Package Contents 1 (1) SmartStar ® -E Mount, the Cube TM ( Models 8500, 8502, 8503 and 8504 ) (1) GOTONOVA TM Hand Controller (Part No. 8403) (1) Controller Cable (1) Tripod (1) Tripod bolt and Tra.
6 1.2. Assembly Terms 1. Telescope tube 2. Dovetail lock 3. Hand controller 4. Altitude lock 5. Mount 6. Tripod 7. Tripod bolt 8. Tray 9. Tray lock.
7 2. Telescope Assembly Step 1. Preparing the Tripod Extend tripod legs to full extension. Step 2. Attaching the Mount Attach mount to tripod using the long bolt (#7).
8 Step 5. Plug in hand controller and AC adaptor. Plug hand controller into either one of the two HBX ports on the mount. Next plug in AC adaptor. (Or use batteries—see step 3). Turn on power (the red light should go on). At this point you can begin observing manually.
9 For 90mm Maksutov-Cassegr ain (#8504) …………………………………. Install Diagonal by screwing it onto the back end of the sco pe. You can adjust the position of the diagonal by loosening the free- spinning threader on the diagonal.
10 3. GOTONOVA TM 8403 Hand Controller Figure 1. GOTONOVA #8403 Hand Controller GOTONOVA TM 8403 hand controller (HC) is the standard controller for a SmartStar ® -E series mount and telescope, as shown in Figure 1. 3.1. Key Description • MENU: Press “MENU” to enter the Main Menu.
11 2. Mount/GPS Status: display current status of the mount. If the mount equipped with an external GPS module, it also indicates GPS status, when the mount is turned on.
12 or 2. Turn the mount power on. Press the SPEED button to select a slew speed (MAX for fast slew and 2X for fine tuning). Turn the SOUTH mark pointing to south using ► or ◄ button. An additional compass may needed. Rotate the telescope point to the zenith using ▲ or ▼ button.
13 time zone). Enter minutes “ahead of” or “behind” UT (universal time). The minimum time difference is 60 minutes. • New York City is 300 minutes “behind” UT • Los Angeles is 480 minu.
14 telescope section). Tighten all lock knobs (Declination, Latitude, Right Ascension, Horizontal Axis) so that telescope’s aim is not disturbed. 2. Turn on the red dot finder and look through the finder window. Adjust the red dot alignment screws to center the red dot on the object.
15 number. A check mark “ √ ” indicates the object is above the horizon, and cross mark “X ” means it is below the horizon. Only those objects above the horizon can be observed. In some catalogs, those stars below the horizon may not display.
16 Goto Landmark: Use ▼ or ▲ button to move the cursor to “Goto Landmark” line, press ENTER. The first saved landmark will display: Use ► or ◄ button to move the cursor and ▼ or ▲ button to change the number, then press ENTER. The mount will automatically slew to the target.
17 Delete All Data Use ▼ or ▲ button to move the cursor to “Delete All Data” line, and press ENTER. Press ENTER to confirm the deletion. Press BACK to back to main menu. 5.4. Sync to Target This operation will match the telescope's current coordinates to Target Right Ascension and Declination.
18 If you have a very good initial setup, one star alignment should be sufficient for good GOTO accuracy. To increase the accuracy you may choose to do two star alignment. 5.6.2. Two Star Alignment Two star ali gnment will increase the GOTO accuracy of the mount.
19 Edit one data Use ▼ or ▲ button to move the cursor to “Edit one data” line, and press ENTER. A user object screen will show: The first line shows the number of the user object. The second line shows the name of the user object, here is “SAO2940”.
20 position and ▲ or ▼ key change the number and press ENTER to select the object you want to edit. Follow the same procedure as “Add a new comet” to edit it. Delete one comet Use ▼ or ▲ button to move the cursor to “Delete one comet” line, and press ENTER.
21 6. Maintenance and Servicing 6.1. Maintenance The SmartStar ® E mount or telescope is a precision instrument designed to yield a lifetime of rewarding applications. Given the care and respect due any precision instrument, your telescope will rarely require factory servicing or maintenance.
22 fresh? How long have they been used? (frequent slew and GOTO will deplete battery power very quickly) • Using AC or DC adapter? Check the plugs to the mount and to the power outlet. • Using extension cord? Make sure the cord is in good condition.
23 Appendix A. Technical Specifications SmartStar ® GOTO Mount Mount AltAzimuth Mount Body Materials Die-cast Aluminum Motor Dual-Axis DC Servo motor with encoders Gear Acetal worm wheel/Nylon 6 worm.
24 Appendix B. GOTONOVA TM 8403 HC MENU STRUCTURE MENU Select and Sl ew Select and Sl ew Plane ts, Sun, Moon Plane ts, Sun, Moon Comets Comets Asteroids Asteroids Stars Stars Mercury Venus Mars Jupite.
25 Align Align One Star Align One Star Align Two Star Alig n Two Star Align User Obj ect List R.A. and DEC. Comets Asteroids User Obj ect List User Obj ect List R.
26 Appendix C. GOTONOVA TM Star List GOTONOVA Deep Sky Object List for 8403 ID No. OBJECT NGC # Messier # IC# A(Abell) U(UGC) 1 Andromeda Galaxy 224 31 2 Barnards Galaxy 6822 3 Beehive Cluster 2632 44.
27 36 Lagoon Nebula 6523 8 37 Little Gem 6445 38 Little Gem Nebula 6818 39 Little Ghost Nebula 6369 40 North American Nebula 7000 41 Omega Nebula 6618 17 42 Orion Nebula 1976 42 43 Owl Nebula 3587 97 .
28 Messier This table is licensed under the GNU Free Documentation License . It uses material from the Wikipedia article List of Messier objects.
29 001 Acamar 049 Ascella 097 Kaus Australis 145 Rassalas 002 Achernar 050 Asellus Australis 098 Kaus Borealis 146 Rasagethi 003 Acrux 051 Asellus Borealis 099 Kaus Media 147 Rasalhague 004 Acubens 05.
30 No. Constellation Abbreviation No. Constellation Abbreviation 1 A ndromeda A nd 45 Lacerta Lac 2 A ntlia A nt 46 Leo Leo 3 A pus A ps 47 Leo Minor LMi 4 A quarius A qr 48 Lepus Lep 5 A quila A ql 4.
31 No. Object Const SAO Name 1 Eta Cas 21732 Achird 2 Alpha Psc 110291 Alrisha 3 Theta Per 38288 4 Alpha For 168373 Fornacis 5 Alpha Aur 40186 Capella 6 Sigma Ori 132406 7 Mu Ori 113389 8 Alpha CMa 15.
32 IOPTRON ONE YEAR LIMITED WARRANTY A. iOptron warrants your telescope, mount, or controller to be free from defects in materials and workmanship for one year. iOp tron will repair or replace such product or part which, upon inspection by iOptron, is found to be defective in materials or workman ship.
デバイスiOptron 8403の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
iOptron 8403をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはiOptron 8403の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。iOptron 8403の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。iOptron 8403で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
iOptron 8403を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はiOptron 8403の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、iOptron 8403に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちiOptron 8403デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
