IRISメーカー200の使用説明書/サービス説明書
ページ先へ移動 of 20
200 Range Dialer Installation Manual Version 1.0.
The information contained is supplied without liability for any errors or omissions. No part may be reproduced or used except as authorised by contract or other written permission. The copyright and foregoing restriction on reproduction and use extend to all media in which the information may be embedded.
.
Iris Touch 200 Range Dialer Installation Manual i Contents 1. Introduction ...................................................................................................... 1 1.1. About this manual… .............................................
Iris Touch 200 Range Dialer Installation Manual ii.
Iris Touch 200 Range Dialer Installation Manual 1 1. Introduction 1.1. About this manual… This manual is designed to help you, the Installer, with the installation process for the IRIS Touch alarm dialer. We recommend that you read through this manual, in its entirety, before you visit the customer’s site and begin the installation.
Iris Touch 200 Range Dialer Installation Manual 2 1.3. System specifications Feature Touch 200 GSM Touch 220 Ethernet Touch 240 Ethernet & GPRS Stylish, tamper proof enclosure Easy to i.
Iris Touch 200 Range Dialer Installation Manual 3 2. Before you start… 2.1. Package contents In this package you should have the following components: • Main dialer unit comprising: • PCB with 3 part plastic enclosure (back, front and slider). • 4 x assembly screws.
Iris Touch 200 Range Dialer Installation Manual 4 3. Alarm dialer interface IRIS dialers carry alarm signals from the alarm panel over IP completely transparently so when they arrive at the Monitoring Centre it is as though they had come over a traditional PSTN connection.
Iris Touch 200 Range Dialer Installation Manual 5 1. Decide where to run the cables Decide the best way to run the cables to the PCB. This can be either: • Behind the unit (through the wall). • Through the bottom of the back plate of the unit (via the ‘knock outs’).
Iris Touch 200 Range Dialer Installation Manual 6 7. Fit the PCB to the back plate Fit the PCB to the back plate, aligning the corners of the plate with the edgings on the back plate and the two bottom screw fittings [13] . Screw in the 2 top screws only [14] .
Iris Touch 200 Range Dialer Installation Manual 7 5. Configuring the IRIS Touch Dialer The majority of configurations can be carried out via the touch screen interface display on the IRIS dialer.
Iris Touch 200 Range Dialer Installation Manual 8 6. Post installation Once you have completed the installation you must: • Ensure the system is running correctly, the LED light on top of the unit is on steady and alarms are being signaled to the Monitoring Centre correctly.
Iris Touch 200 Range Dialer Installation Manual 9 Reference g round Pin inputs 14 4K7 Resistor 15K Resistor 14 Reference g round Pin inputs 7.1. Installation Each PIN input is designed to be connected.
Iris Touch 200 Range Dialer Installation Manual 10 7.2. Default alarm messages The default SIA messages for each PIN are shown below: Pin ‘Set’ message ‘Restore’ message Meaning 1 NBA01 NBR01 Burglary alarm/restore 2 NFA02 NFR02 Fire alarm/restore 3 NQA03 NQR03 Emergency alarm/restore 4 NOP04 NCL04 Open/close 8.
Iris Touch 200 Range Dialer Installation Manual 11 Appendix A – Settings menu Setting Purpose Network Interfaces Selects which network interfaces are going to be used (i.e. Ethernet and/or Ethernet/GPRS). Stops dialer reporting trouble on interfaces not being used.
Iris Touch 200 Range Dialer Installation Manual 12 Appendix B – Installation photos [1] [2] [3] [5] [4] [6].
Iris Touch 200 Range Dialer Installation Manual 13 [9] [7] [8] [13] [14] [17] [16] [18] [11] [10] [12] [15] [20] [19].
Iris Touch 200 Range Dialer Installation Manual 14 Appendix C – Specification Alarm Dialer Interface Two wire interface via RJ11 socket 40V feed at 12mA Ringing voltage 40V P-P to REN4 for incoming .
Iris Touch 200 Range Dialer Installation Manual 15 Conformance The IRIS range of alarm dialers comply with the following European Directives: • 1999/5/EC (Radio & Telecoms Terminal Equipment Directive). • 72/23/EEC (Low Voltage Directive). • 89/336/EEC (Electromagnetic Compatibility Directive as amended by 92/31/EEC).
デバイスIRIS 200の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
IRIS 200をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはIRIS 200の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。IRIS 200の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。IRIS 200で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
IRIS 200を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はIRIS 200の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、IRIS 200に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちIRIS 200デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。