Jameco Electronicsメーカー527822の使用説明書/サービス説明書
ページ先へ移動 of 31
The content and cop yrights of the attached material are the proper ty of its owner . Distributed by: www .Jameco.com ✦ 1-800-831-4242 Jameco Part Number 527822.
User’ s Manual USB 2.0 DOCK.
Index INTRODUCTI ON ................................................................................................................... ............... 3 S YSTEM R EQUIREMENTS ...........................................................................
Intr oduction Thank you for ordering the USB 2.0 DOCK. The USB 2.0 DOCK is an intelligent expansion module, which connects to a PC or notebook via Universal Serial Bus (USB) port, providing one high-speed RS-232 serial port, one printer port, one PS/2 keyboard & mouse and 4 downstream USB ports.
Connector s One DB-9 RS-232 serial interface connector supports baud rates from 1,200 to 1 15.2K. One DB-25 parallel connector supports IEEE-1284 bi-directional printer port. One Mini-din for PS/2 keyboard, mouse. Four USB receptacle type A downstream ports.
LED Indicator P o wer Indica tor The Power Indicator will turn ON when bus power is supplied. USB Indicators There are four USB indicators to show if the USB Downstream Ports are ready for use. 1. If the USB 2.0 DOCK is not ready for use, the USB Indicators will turn OFF , and the USB Downstream Ports cannot be used.
Installing USB 2.0 DOCK 1. This installation guide is written in accordance with dif ferent operation systems. Including W indows 98/98SE/Me, W indows 2000, and W indows XP . 2. Power on your computer and make sure that the USB port is enabled and working properly .
W in98/98SE/Me Driv er Installation The driver installation is divided into 5 steps. For Win98/98SE installation should include all 5 steps (A-E). For Win Me installation should only need to perform Step B and D. Please install USB 2.0 DOCK step by step by following the instructions.
A4. Click “Next” to continue (Ref Figure A-4) Figure A-4 A5. Click “Finish”, W indows has finished installing USB 2.0 Hub driver (Ref Figure A-5) Figure A-5 A6. Click “Next” to continue installing a USB 1.1 Hub (Ref Figure A-6) Figure A-6 A7.
A8. Click “Next” to continue (Ref Figure A-5) Figure A-8 A9. Click “Next” to continue (Ref Figure A-5) Figure A-9 A10. Click “Finish”, W indows has finished installing USB 1.
Step B: Printer Adapter Installation (This section for W indows98/98SE/Me) T o install the software for USB to Printer Converter of the USB 2.0 DOCK: B1. Insert the “USB 2.0 DOCK driver CD” into CD ROM. Click “Next” to continue (Ref Figure B-1) F i g u r e B - 1 B2.
B4. Click “Next” to continue (Ref Figure B-4) Figure B-4 B5. Click “Finish”. Windows has finished installing the printer driver (Ref Figure B-5) F i g u r e B - 5 Before connecting the printer on the parallel port of USB 2.0 DOCK, the printer driver must be installed in advance, or it might print unknown form at of characters.
Step C. USB Composite Device for PS/2 keyboard & mouse Installation (This section for W indows98/98SE only) C1. Click “Next” to continue (Ref Figure C-1) T o install the USB Composite Device driver of USB 2.0 DOCK: Figure C-1 C2. Click “Next” to initiate search for the best driver for your device (Ref Figure C-2) Figure C-2 C3.
C4. Click “Next” to continue (Ref Figure C-4) Figure C-4 C5. Click “Finish”. W indows has finished installing the USB Composite device driver for PS/2 keyboard & mouse.
Step D: Serial Converter Installation (Required for 98/98SE/Me W indows System) T o install the USB to serial port driver of the USB 2.0 DOCK, please make sure the driver diskette is inserted: Figure D-1 D1. Click “Next” to continue (Ref Figure D-1) D2.
D4. Click “Next” to continue (Ref Figure D-4) Figure D-4 D5. Click “Finish”. W indows has finished installing RS-232 Serial port driver (Ref Figure D-5) F i g u r e D - 5 USB 2.
Step E. USB HID Device for PS/2 keyboard & mouse Installation (This section for W indows98/98SE only) T o install the USB HID device PS/2 keyboard & mouse driver of USB 2.0 DOCK: E1. Click “Next” to continue (Ref Figure E-1) Figure E-1 E2.
E4. Click “Next” to continue (Ref Figure E-4) Figure E-4 E5. A warning message window will show up. Please insert the W indows 98 CD and Click “OK” to continue or specify the location of the 98 system installation files. (Ref Figure E-5) Figure E-5 E5.
W in2000 Driv er Installation T o install the driver of the USB 2.0 DOCK, please make sure the driver CD is inserted. Step1. Click “Next” to continue (Ref Figure W in2k -1) Figure Win2k-1 Step2. Click “Next” to initiate search for the best driver for your device (Ref Figure W in2k -2) Figure Win2k -2 Step3.
Step4. Click “Next” to continue (Ref Figure W in2k -4) Figure Win2k -4 Step5. Click “Finish”, W indows has finished installing Serial port driver . (Ref Figure W in2k -5) Figure Win2k -5 Before connecting the m odem on the serial port of USB 2.
W inXP Driv er Installation T o install the USB to serial port driver of the USB 2.0 DOCK, please make sure the driver diskette/CD is inserted: Step1. Click “Next” to continue (Ref Figure W inXP-1) Figure WinXP-1 Step2. Click “Finish”, W indows has finished installing Serial port driver .
Congratulations!! Y ou have finished installing USB 2.0 DOCK. Please click on Start >> Settings>> Control Panel, and double click System , and Device Manager . Please double check the Human Interface Devices, Keyboard, Mouse, Ports, and Universal serial bus controller of the dialog box to see if they work properly .
Set Up the Printer De vice Follow the steps below to connect your printer to the USB 2.0 DOCK with your PC: For Windows 98/98SE and Me: 1. Turn off your printer. Plug in the cable to connect USB 2.0 DOCK parallel port and printer. Turn on the printer afterwards.
Figure 6 6. If you do not have a printer installed yet, click on Start , Settings , Printers , Add Printer . The Add Printer Wizard will start and assist you in installing a new printer device. Select the printer manufacturer and model nam e from the list provided by the wizard or use the printer driver diskette supplied by your printer.
For WINDOWS 2000 and XP: 1. Turn off your printer. Plug in the cable to connect USB 2.0 DOCK parallel port and printer. Turn on the printer afterwards. 2. Turn on your computer and plug in the USB cable to connect the USB 2.0 USB and the USB port of PC.
Set up the HyperT er minal with USB to serial por t Follow the steps below to configure your HyperTerminal with USB to serial COM port setting: 1. Make sure that HyperTerminal is installed in your system.
Figure 9 4. Click the " Connect using " item to indicate the proper COM port which appeared in step 1, and follow the succeeding instructions to complete the setup.
Uninstalling the Driv er Pr ogr am If you want to remove the USB 2.0 DOCK driver program, you can uninstall it by following the steps below: a. Unplug the USB cable from your PC. b. Run the Un20DOCK.exe program from the USB 2.0 DOCK driver CD. c. For WIN98/SE/ME : Please Press OK to remove Printer Convertor.
d. For WIN2000/XP : Please Press OK to rem ove Serial Convertor. System will require to restart to complete the un-installation. Please press Yes to continue.
APPLICA TION NOTE 1. USB 2.0 DOCK normally derives its own power from PC Host. W hen system power plugged in to the USB port of PC or notebook, the Large LED will turn green, and the serial, parallel, keyboard, mouse, and 4 downstream ports can operate without the switching adapter .
USB 2.0 DOCK User ’ s Manual - 30 - Disclaimer Information in this document is subject to change without notice. T he manufacturer does not make any representations or warranties (implied or otherwi.
デバイスJameco Electronics 527822の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Jameco Electronics 527822をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJameco Electronics 527822の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Jameco Electronics 527822の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Jameco Electronics 527822で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Jameco Electronics 527822を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJameco Electronics 527822の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Jameco Electronics 527822に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJameco Electronics 527822デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。