JensenメーカーSmart Talk JCR-290の使用説明書/サービス説明書
ページ先へ移動 of 25
MODEL JCR-290 AM/FM TALKING DUAL ALARM CLOCK RADIO WITH SMART TALK™ PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
E-1 TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES C A N B E F U LL Y I N S E R T E D T O P R E V E N T B L A D E E X P O S U R E . T O P RE V E N T F I R E OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF AC PLUG TO WIDE SLOT. FULLY INSERT. E-2 810-00000S-190 7) Do not block any ventilation openings.
This equipment has been tested and found to comply with the limits for a radio receiver , pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
E-4 Sound can be deceiving. Over time your hearing "comfort level" adapts to higher volumes of sound. So what sounds "normal" can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.
Controls and Functions of Unit 1. V olume Control 12. On/Of f Button 2. ALARM 1 (AL1) On/Off Button 13. LCD Panel 3. T rigger On/Of f Switch 14. Rating Label 4. < (Down) Button 15. Reset Button 5. Set Button 16. Battery Compartment Cover 6. > (Up) Button 17.
E-6 A void installing the unit in locations described below: • Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters. • Humid, moist or dusty places. • Places subject to constant vibration. • Noisy places.
INSTALLING BACKUP BATTERIES 1. Remove the BA TTERY COMP ARTMENT COVER. 2. Install 2 x 3V type CR2032 Lithium batteries (not included) according to the polarity indications on the BA TTERY COMP ARTMENT COVER.
E-8 Smart T alk is an innovative clock operating system using the latest voice recognition technology . It’s the HANDS-FREE way to set your alarm clock.
7. Press SET BUTTON (#5) to proceed to AL2 settings following steps #1 to 6 above. AL2 indicators (#26) will respond to the features chosen. 8. Press SET BUTTON (#5) to proceed to TIME settings following steps #1 to 4 above. 9. Press SET BUTTON (#5) to proceed to Sleep Sound settings.
E-10 SMART TALK COMMANDS COMMAND PHRASE Smart Talk Time Set Time Alarm Set Alarm Alarm Sound Alarm Off Snooze Sleep Time Play Sleep Sound Display Cancel FUNCTION DESCRIPTION AND FACTORY PRESET T rigger word to activate the voice recognition system. T o check the current time.
TO SET THE CURRENT TIME 1. Start by saying the trigger word “Smart Talk” or press the SNOOZE BAR (#1 1). 2. The unit will reply “Yes” and will wait for your next command. 3. Say “Set Time” and the unit will reply “Tell me the current time including AM or PM”.
E-12 3. Say “Set Alarm” and the unit will reply “Say Alarm One or Alarm Two”. 4. T o set Alarm One, say “Alarm One”. Y ou can also say the command “Cancel” during this step if you wish to cancel setting the alarm and the unit will reply “OK” to confirm.
E-13 TO SET THE ALARM WAKE SOUNDS (AL1/AL2) 1. Start by saying the trigger word “Smart Talk” or press the SNOOZE BAR (#1 1). 2. The unit will reply “Yes” and will wait for your next command. 3. Say “Alarm Sound” and the unit will reply “To set alarm sound, please say Alarm One or Alarm Two”.
E-14 NOTE: - When the preset alarm time is reached, the chosen alarm sound will start sounding at a fairly low volume level and gradually increase to a very loud volume level in 60 seconds.
When the preset alarm time is reached, the chosen alarm sound will start. Y ou can momentarily stop the alarm sound for 9 minutes by using the snooze function. The snooze function can be repeated for a maximum of 6 times within 60 minutes from the original preset alarm time.
Y ou can turn the alarm off for the day only so that it will sound again on the following day or you can turn the alarm completely of f by disabling it. MANUAL OPERATION 1. When an alarm is sounding, press the ON/OFF button (#12) to turn the alarm off only for the day .
Y ou can choose either a nature sound (Ocean, Rain or Brook) or the radio as a sleep sound. The sleep time can be adjusted from: 15, 30, 45 or 60 minutes and OFF . MANUAL SETTING SETTING THE SLEEP SOUND 1. The Sleep Sound can be set by repeatedly pressing the SET BUTT ON until you get to the to Sleep Sound settings.
E-18 ACTIVATE SLEEP MODE AND SETTING SLEEP TIME 1. Press the SLEEP BUTTON (#10) to start the sleep mode. 2. The sleep time is default to 60 minutes on first use and “60” will on the display (#24). 3. Press the SLEEP BUTTON (#10) repeatedly to cycle through shorter sleep time options of 45, 30, 15 minutes or OFF .
1. Select your desired radio band using the BAND SELECTOR (#7) for AM or FM. 2. Press the ON/OFF BUTT ON (#12) to turn radio on. 3. Rotate the TUNING CONTROL (#9) to your desired radio station according to the dial scale on the unit. 4. Rotate the VOLUME CONTROL (#1) to adjust to the desired output level.
MANUAL SETTING The display HI/LO DIMMER BUTTON (#19) is located on the back of the unit. Pressing it will toggle between bright and dim backlight options for the display . USING SMART TALK™ 1. Start by saying the trigger word “Smart Talk” or press the Snooze Bar (#1 1).
SPECIFICATIONS E-21 Frequency Range: AM 530 - 1710 kHz FM 88 - 108 MHz AC Power Source: 120V~ 60Hz 5W Backup Battery: 2 x 3V type CR2032 Lithium batteries (Not included) Clock Accuracy: up to +/- 60 s.
TROUBLESHOOTING GUIDE E-22 The clock does not recognize your voice commands correctly Smart T alk™ accidentally triggers without saying the trigger word Clock does not always recognize “Alarm Off.
SPECTRA MERCHANDISING INTERNA TIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U.S.A. This warranty is not assignable or transferable.
IF THE UNIT IS OUTSIDE THE W ARRANTY PERIOD, please include a check for $15.00 to cover the cost of repair , handling and return postage. All out of warranty returns must be sent prepaid. It is recommended that you contact SPECTRA first at 1-800-777-5331 or by e-mail at info@spectraintl.
デバイスJensen Smart Talk JCR-290の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Jensen Smart Talk JCR-290をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJensen Smart Talk JCR-290の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Jensen Smart Talk JCR-290の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Jensen Smart Talk JCR-290で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Jensen Smart Talk JCR-290を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJensen Smart Talk JCR-290の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Jensen Smart Talk JCR-290に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJensen Smart Talk JCR-290デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
