Jura CapressoメーカーIMPRESSA S70の使用説明書/サービス説明書
ページ先へ移動 of 20
IMPRESSA S70 IMPRESSA X70 Instructions for use 07/2001 Art. Nr. 61957.
Legend: DISPLAY: serves as information. DISPLAY: please follow the instructions shown. = Note = Important = Tip Jura Impressa S70 / X70 English ...................................................................................................
Fig. 1 Fig. 4 Fig. 7 Fig. 2 Fig. 5 Fig. 8 Fig. 3 Fig. 6 Fig. 9 A B.
7 8 9 17 18 12 13 14 15 16 19 D C B A E F G H 10 11 20 22 21 6 5 4 3 2 1.
Operating elements Jura Impressa S70/ X70 1 Drip tray / residual water container 2 Drip tray cover 3 Cover for programming keys 4 Coffee key for 2 normal cups 5 Coffee key for 1 normal cup 6 Coffee ke.
6 T able of contents Jura Impressa S70/ X70 1. Description ................................................. page 7 2. Safety instructions ....................................... page 7 2.1 Warnings ........................................... page 7 2.
7 2. Safety instructions 2.1 Warnings Children are unaware of the dangers that electrical machines represent. Therefore children should never be left unsupervised with electrical machines. This machine should only be used by people who have read and understood the operating instructions.
8 If using acidic decalcifying agents be sure to immediately re- move any splashes and drops from delicate surfaces, especially natural stone and wooden surfaces, or take corresponding pre- cautions. 3. Check before use 3.1 Checking mains voltage The machine is set for the correct voltage before leaving our factory.
9 6. Adjusting for water hardness The water is heated inside the machine. With use, this leads to calcium deposits (furring) forming on the machine. This will be automatically indicated on the display. For this reason, it is necessary to adjust the machine to the hardness of your local water before you use it for the first time.
10 YES flashes To confirm press key . An acoustic signal can be heard. RINSE FILTER / OPEN TAP Place a sufficiently large container (approx. 1 litre) under the pivoting nozzle (20). Turn selector switch for coffee or hot wa- ter/steam (19) to position .
11 FILL POWDER Now put 1 or 2 level measuring spoons of pre-ground coffee into the pre-ground powder funnel (14). Put 1, respectively 2 cups under the coffee-spout and press the required key. Never use soluble instant coffee or quick coffee.
12 12. Programming Before leaving our factory, the machine is adjusted to enable you to obtain coffee without any additional programming. In order to adapt the result to your personal taste, various settings can be pro- grammed individually. The programming keys are located behind the front cover (3).
13 After 10 minutes the steam heating-system switches off automatically. The warning lamps go out. By pressing the steam key anew, you return to stand-by-status for drawing off steam. ECONOMY MODE OFF means that the stand-by-status for steam is set to 10 minutes and the heating for the cup warm- ing tray is on.
14 To switch off the automatic timer proceed as follows: Press key Press key UNIT ON —:— 12.9 Programming automatic switch off time OFF AFTER 5.0 HOURS Press key By briefly pressing key or you can set the hours and then confirm by pressing key (0.
15 13.4 Fill beans FILL BEANS Fill in beans as described in chapter 3.3. The message FILL BEANS will only disappear after drawing off a coffee. We recommend cleaning the bean container from time to time with a dry cloth before you refill beans.
If a Claris filter cartridge is used, remove it beforehand. 13.10 Regular servicing Regular Jura services ensure your machine’s reliability and longer life. Keep the original packaging to protect the machine while being transported. 14. Cleaning The machine has an integrated cleaning program.
17 COFFEE SECTOR / UNIT DECALCIFYING Inside the machine the decalcifying agent is conducted to the drip tray. EMPTY TRAY FILL WATER PRESS CALC COFFEE SECTOR / UNIT DECALCIFIYING Inside the machine the water is conducted to the drip tray.
18 18. Messages Cause Action FILL WATER Water tank is empty Top up with water Water level indicator in tank is jammed Empty tank, rinse out, fill up and replace Tank is calcified, water level indicato.
19 E Cause Action CLEAN UNIT You have drawn off coffee 220 times or run Clean as described in chapter 14 the rinsing program 180 times Message still displayed, although machine cleaned Run cleaning pr.
20 Problem Cause Action Not enough froth while – Unsuitable milk-type – Use full cream milk frothing up milk – Frothing nozzle blocked – Clean frothing nozzle – Frothing nozzle in wrong posi.
デバイスJura Capresso IMPRESSA S70の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Jura Capresso IMPRESSA S70をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJura Capresso IMPRESSA S70の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Jura Capresso IMPRESSA S70の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Jura Capresso IMPRESSA S70で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Jura Capresso IMPRESSA S70を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJura Capresso IMPRESSA S70の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Jura Capresso IMPRESSA S70に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJura Capresso IMPRESSA S70デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。