Jura CapressoメーカーIMPRESSA S9/S7の使用説明書/サービス説明書
ページ先へ移動 of 28
IMPRESSA S9/S7 avantgarde Instructions for use 3/05 Art. Nr. 65418.
IMPRESSA S9/S7 avantgarde Legend: DISPLAY: serves as information. DISPLAY: please follow the instructions shown. = Note = Important = Tip JURA Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www.
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 11 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 12 Fig. 9 Fig. 10 Fig. 13 1 2 3 Fig. 14.
Description of the machine 1. Drip tray 2. Drip grate 3. Programming door 4. Rotary Switch 5. Selection key for pre-ground coffee 6. Coffee à la Carte key 7. 1 Coffee key 8. 2 Coffees key 9. 1 Espresso key 10. 2 Espressos key 11. ON / OFF key 12. Rinse key 13.
5 Contents 1. Safety information .............................................. page 6 1.1 Warnings ................................................ page 6 1.2 Precautions .............................................. page 6 2. Before you start using the IMPRESSA S9/S7 avantgarde .
6 Before you begin Congratulations on having bought this IMPRESSA S9/S7 avant- garde! In order to ensure perfect operation of your IMPRESSA, carefully read this operating manual and keep it for future reference.
7 2.3 Filling the water tank Only use fresh, cold water. Never fill the water tank with milk, mineral water or other liquids. Take out the water tank and thoroughly rinse it out with cold tap water (Fig. 1). Then fill it with water and place it back into the coffee machine.
8 Place a receptacle under the 2-stage frothing jet (24) and press one of the Steam keys . The system now fills up automatically. A little water will leak from the frothing jet. SYSTEM FILLING HEATING UP PRESS RINSE Place a cup under the height-adjustable coffee spout (18).
9 Now turn the Rotary Switch (4) until the following message is displayed: EXIT Now press the Rotary Switch (4) to leave the programming mode. SELECT PRODUCT 5. Using a CLARIS plus filter cartridge When using the CLARIS plus filter cartridge correctly, de- calcifying your IMPRESSA will no longer be necessary.
10 FILTER RINSING Filter rinsing stops automatically. SELECT PRODUCT You can also trigger a change of filter manually from the Maintenance menu at any point in time (only if the filter has been activated) - see Chapter 13.
11 To stop the brewing process prematurely, press any of the product keys. We recommend always using powder from fresh coffee beans or pre-ground, vacuum-packed coffee. Never fill in more than 2 scoops of powder. The filler funnel is no storage tank. Make sure the coffee powder you use is not too fine.
12 *The Professional-Cappuccino Frother is optional with the IMPRESSA S7 avantgarde. The amounts given in ML are approximate values and may vary from the effective quantity. 10. Drawing off steam To ensure perfect operation, clean the 2-stage frothing jet (24) regularly.
*The Professional-Cappuccino Frother is optional with the IMPRESSA S7 avantgarde. 13 IMPRESSA S9 avantgarde: The supplied “Deluxe” milk pitcher is suited for drawing in the milk. 11.4 Making cappuccino and hot milk with the Professional-Cappuccino Frother * Fill the milk pitcher with milk or dip the milk hose directly into the milk.
14 Temperature Water portion Steam portion Economy mode Time Automatic switch-on time Automatic switch-off time Language Display Information (to be viewed only) 13.1 Programming the filter Please refer to Chapter 5 “Using the CLARIS plus filter cartridge”.
15 NORMAL (example) – _ _ _ + Now turn the Rotary Switch (4) until the required amount of powder is set. STRONG (example) – _ _ + Confirm the selected setting by pressing the Rotary Switch (4).
16 TEMPERATURE NORMAL (example) Now turn the Rotary Switch (4) until the required temperature is set. TEMPERATURE HIGH (example) Confirm the selected setting by pressing the Rotary Switch (4).
17 Press the Rotary Switch (4) to leave the programming mode. SELECT PRODUCT 13.9 Economy mode You can set your machine to various power saving modes. SELECT PRODUCT Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal.
18 SELECT PRODUCT Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal. FILTER NO or YES Turn the Rotary Switch (4) until the following message is dis- played: TIME —:— Now press the Rotary Switch (4) to start programming.
19 Now press the Rotary Switch (4) to leave the programming mode. SELECT PRODUCT If the IMPRESSA is switched off with the power switch (27), you will need to set the time again next time you switch the machine on. The machine will prompt you to do so.
20 Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal. FILTER NO or YES Turn the Rotary Switch (4) until the following message is dis- played: DISPLAY 24HRS / ML Now press the Rotary Switch (4) to start programming.
21 14. Maintenance 14.1 Filling the water tank FILL WATER TANK If this information is displayed, the machine will no longer make coffee. Refill water as described in Chapter 2.3. SELECT PRODUCT The water tank should be rinsed out and filled with fresh water daily.
22 14.6 Removing stones from the grinding gear Switch the machine off using the ON / OFF key (11). Turn the power switch (27) off. Open the lid of the bean tank (16) and remove the aroma preser- vation cover (15). Remove any beans with a vacuum cleaner.
23 When the process has been completed, the IMPRESSA switches itself off. The display will read “FILL SYSTEM / PRESS STEAM” next time you switch the machine on. For more information, please refer to Chapter 3 “First use”. 14.11 General cleaning instructions Never use sharp objects or caustic chemicals for cleaning.
24 EMPTY TRAY / EMPTY GROUNDS Empty out the drip tray (1) and integrated coffee grounds bin. TRAY MISSING Place the empty, clean drip tray (1) and integrated coffee grounds bin back into the IMPRESSA.
25 Turn the Hot Water key (22) to the symbol. MACHINE DE-SCALING You will hear an acoustic signal. CLOSE TAP Turn the Hot Water key (22) to the symbol. MACHINE DE-SCALING You will hear an acoustic signal. EMPTY TRAY / EMPTY GROUNDS Empty out the drip tray (1) and integrated coffee grounds bin.
26 18. Tips for perfect coffee Height-adjustable coffee spout (18) You can adjust the height of the coffee spout to the size of your cups. Grinding degree Refer to Chapter 2.5 “Adjusting the grinding gear”. Preheating cups The machine features a heatable cup shelf (19).
27 19. Problems Problem Cause Remedy Grinding gear makes a very loud noise Foreign body in the grinding gear Please refer to Chapter 14.6 Too little froth when frothing milk Professional Cappuccino Frother clogged Clean frother (Chapter 11.
28 20. Legal information These operating instructions contain all the information required for operating and maintaining the machine properly. Knowledge of and compliance with the specifications contained in these operating instructions is required for using the machine safely as well as for operational safety and safety during mainte- nance.
デバイスJura Capresso IMPRESSA S9/S7の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Jura Capresso IMPRESSA S9/S7をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJura Capresso IMPRESSA S9/S7の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Jura Capresso IMPRESSA S9/S7の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Jura Capresso IMPRESSA S9/S7で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Jura Capresso IMPRESSA S9/S7を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJura Capresso IMPRESSA S9/S7の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Jura Capresso IMPRESSA S9/S7に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJura Capresso IMPRESSA S9/S7デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
