JuraメーカーENA 5の使用説明書/サービス説明書
ページ先へ移動 of 34
The ‘ENA 5 Instructions for Use’ has been awarded the seal of approv al by the independent German T echnical Inspection Agency, TÜV SÜD , due to its easy-to-under stand style, its thoroughness and cover age of safety aspect s.
2 ENA 5 These safeguards apply for machine s with UL safety test (see r ating plate and chapter 8, ‘T echnical data’). When using electrical appliances, basic safety precautions should alwa ys be follow ed, to reduce the risk of fire , electric shock, and/or injury to per sons, including the follo wing: Z Read all instructions.
3 ENA 5 a. A short power supply cord is provided to reduc e the risk resulting from becoming entangled in or tripping over a long c ord. Y our ENA has a 3-pin grounded plug. b. Longer extension cords are available and ma y be used if care is exercised in their use .
4 ENA 5 Z Never fill instant coff ee, c hocolate mix etc. into the grinder or ground coffee funnel (grinder b y-pass). It will damage the functioning of the brewing chamber . Z Never fill sugar c oated coffee beans int o the bean hopper . In case of doubt, call your dealer .
5 ENA 5 en en it en it.
6 ENA 5 Y our ENA 5 IMPORT ANT SAFEGU ARDS 2 Control elements 8 Proper use 10 For y our safety 10 W elcome to the world of JURA 11 JURA on the Internet ...................................................................................................
7 ENA 5 Rinsing the Professional Cappuccino F rother ................................................................................................. 26 Cleaning the Professional Cappuccino F rother ...................................................
8 ENA 5 1 2 3 4 5 6 7 10 9 8 1 W ater tank 2 Powder c hute for pre-ground coffee 3 Coffee grounds container 4 Drip tra y 5 Cup platform 6 Bean container cover 7 l Switc h for hot w ater and steam prep.
9 ENA 5 1 4 5 2 3 6 7 1 Q On/off button 2 Grinding wheel 3 Cover 4 P P button 5 c Maintenance button 6 g Rotar y Switc h 7 Display 8 Professional Cappuccino F rother 9 Easy Cappuccino Fr other 10 2-st.
10 ENA 5 Proper use The machine has been designed and built for domestic use. It should only be used to prepare coffee and to heat milk and w ater . Use for any other purpose will be deemed improper . JURA Elektroapparat e AG cannot acc ept any responsibility for the consequences of improper use.
11 ENA 5 People , including children, who Z do not have the ph ysical, sensory or ment al capabilities to use the machine safely or Z are inexperienced or lack knowledge in ho w to use the machine safely must be supervised by a responsible person when using it, or must be instructed in how to use it correctly .
12 ENA 5 Z Hot wat er nozzle 3-colour plain text display Y our ENA features a 3-colour plain text display . The colours of the display texts have the following meanings: Z Green: Y our ENA is ready for use. Z Red: The ENA is prompting y ou to perform an action.
13 ENA 5 g T T urn the Rotary Switch until LANGUAGE ENGL I SH is display ed. k T Press the Rotary Switch to c onfirm the language setting. OK , the language is then adjusted. O PEN TAP T Place a receptacle under the nozzle. l T T urn the switch to position m .
14 ENA 5 k T Press the Rotary Switch. O PEN TAP l T T urn the switch to position m . F I L TER R I NS I NG , water is dis- charged from the nozzle . E Rinsing of the filter can be interrupted at any time . T o this purpose turn the switch clockwise. E The wat er may be slightly discoloured.
15 ENA 5 U If the fineness of grind setting is too fine , the coffee only drips from the c offee spout. Z Select a coarse setting for a darker roast. U If the fineness of grind is too coarse the coffee flow s too quickly from the coffee spout. Example : Adjusting the fineness of grind during coffee prepar ation.
16 ENA 5 2 Preparation 1 coffee at the touc h of a button Precondition : READ Y appears on the display . T T urn the coffee spout to the 1 c up position. T Place the cup under the coffee spout. k T Press the Rotary Switch to start coffee preparation. During grinding the strength of the coffee is briefly display ed.
17 ENA 5 1 C UP , the pre -set amount of water flo ws into the cup, prepar ation stops aut omati- cally . READY E It is also possible to prepare two cups of pre-ground coffee. T o this purpose place two level measuring spoons of pre-ground coffee into the filler funnel.
18 ENA 5 T Place a cup under the nozzle. T Set the selec tor lever of the no zzle to the milk foam p position. g T T urn the Rotary Switch until STEAM is display ed. k T Press the Rotary Switch. HEA T I NG READY appear s as soon as the ENA is sufficiently heated.
19 ENA 5 Cappuccino with the 2-stage frothing nozzle Precondition : READ Y appears on the display and the coffee spout is set at the 1 cup position. T Push the 2-stage frothing nozzle to the lower po sition. T Place a cup of milk below the 2-stage frothing nozzle and immerse the nozzle in the milk.
20 ENA 5 Heating milk with the 2-stage frothing nozzle Precondition : READ Y appears on the display . T Push the 2-stage frothing nozzle to the top position. T Place a cup of milk below the 2-stage frothing nozzle and immerse the nozzle in the milk. E If the nozzle does not reach int o the cup, lift the cup tow ards the nozzle .
21 ENA 5 Precondition : READ Y appears on the display . T O pen the cov er behind the Rotary Switch. P T Press the P button until R I NSE appears. g T T urn the Rotary Switch until PRO DUCT is display ed. k T Press the Rotary Switch to enter the programme item.
22 ENA 5 g T T urn the Rotary Switch until 2 H R S is display ed. k T Press the Rotary Switch to c onfirm the setting. OK , the automatic switch-off time is then adjusted. O FF A FTER g T T urn the Rotary Switch until EX I T is display ed. k T Press the Rotary Switch to exit progr am- ming mode.
23 ENA 5 Z Rinse the nozzle regularly if it is used to w arm or froth milk. Rinsing the machine – manually When the ENA is switched on, a prompt to perform a rinse operation automatically appears after heating. When the ENA is switched off, the system is automatically rinsed if a coffee spec iality has been prepared.
24 ENA 5 Rinsing of the filter stops automatically , CLOSE TAP . y T T urn the switch to position o . HEA T I NG READY Changing the filter – manually The ‘Change filter’ oper ation can be manually initiated. Precondition : READY appear s on the display .
25 ENA 5 T T urn the coffee spout to the 1 c up or 2 cup position. Cleaning the machine – manually The ‘Clean machine ’ operation can be manually initiated. Precondition : READY appear s on the display . T O pen the cov er behind the Rotary Switch.
26 ENA 5 T Place a receptacle (500 ml min.) under the the Connector System © . l T T urn the switch to position m . DE - SCAL I NG , water flo ws out of the Connector System © sever al times. CLOSE TAP y T T urn the switch to position o . DE - SCAL I NG , the descaling operation is continued.
27 ENA 5 Cleaning the Professional Cappuccino F rother T o ensure that the Professional Cappuccino F rother works perfectly, y ou should clean it daily when you hav e been preparing milk. CAUTION If the wrong cleaning agent is used, the machine could be damaged and/or detergent residues could be left in the water .
28 ENA 5 E The ENA will not prompt you t o rinse the Easy Cappuccino F rother . T Remove the milk pipe from the milk carton or milk container . T Fill a recept acle with fresh w ater and immerse the milk pipe in the water . T Place another receptacle under the nozzle.
29 ENA 5 Dismantling and rinsing the Easy Cappuccino F rother T Carefully remove the Easy Cappuccino F rother from the Connector System © . T Dismantle the nozzle completely . T Rinse all nozzle par ts thoroughly with running wat er . T Reassemble the Easy Cappuccino F rother and attach it to the Connector System © .
30 ENA 5 5 Display messages Message Cause/Result Action F I LL WATER T ANK The water tank is empty . Y ou cannot prepare any coffee specialities, hot wa ter or steam. T Fill the wat er tank (refer to Chapter 1 ‘Preparing and using for the first time – Filling the water tank’).
31 ENA 5 6 T roubleshooting Problem Cause/Result Action Grinder is making a very loud noise. There are foreign objects in the grinder . T Contact customer suppor t in your country. Contact information is av ailable on the company w ebsite at www .jura.
32 ENA 5 7 T ransport and environmentally neutral disposal T ransport / Empt ying the system K eep the packaging of your ENA. It should be used to protect the machine during transpor - tation. In order to protect the ENA from frost during transportation, the system must be emptied.
33 ENA 5 Index 2-stage frothing nozzle 9 Dismantling and rinsing 29 3-colour plain text display 12 A Adjusting Energy-saving mode 21 Grinder 14 Language 22 Units of water 22 Automatic switch-off 21 B .
34 ENA 5 P P button 9 Powder c hute for pre-ground coffee 8 Preparation Coffee 16 Pre-ground coffee 16 Preparing Hot water 20 Preparing and using for the first time 12 Professional Cappuccino F rother.
デバイスJura ENA 5の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Jura ENA 5をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJura ENA 5の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Jura ENA 5の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Jura ENA 5で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Jura ENA 5を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJura ENA 5の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Jura ENA 5に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJura ENA 5デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
