JuraメーカーGIGA X9c Professionalの使用説明書/サービス説明書
ページ先へ移動 of 60
GIG A X9c Professional Instructions for Use JURA T ype 682 K Original instructions for use Before using the machine read the instructions for use . E The Instructions for use has been awarded the seal.
2 Control elements 4 Import ant information 6 Proper use ...................................................................................................................................................... 6 For y our safety ........................
3 T able of contents W arnings J W ARNING J CAUTION Alwa ys take note of an y information mark ed with the words CAUTION or W ARNING and a warning sign. The signal word W ARNING draws y o ur attention to potential serious injury, and the signal w ord CAUTION to potential minor injury .
4 Control elements Control elements 5 7 2 3 9 8 11 16 15 14 10 12 13 4 1 6 1 Bean container with aroma preser vation cov er 2 Bean container status indicator 3 W ater tank cov er 4 W ater tank 5 P owe.
5 Control elements T op of the machine 1 Q On/Off button 2 g Rotary Switch 3 O P button (progr amming) Fro n t 4 Display 5 Multi -function buttons (button function depends on what .
6 Important information Impor tant information This machine is intended for use b y specialist or trained staff in busi- nesses, light industry and agricult ural facilities or for c ommercial use by non-professionals. It should o nly be used for coff ee preparation and to heat milk and wat er .
7 Important information U T o completely and safely disc onnect the machine from the power supply , first switch off the GIGA using the On/Off but- ton and then at the power swit ch. Only then should you remov e the mains plug from the power sock et. There is a risk of scalds or burns on the spouts.
8 Important information People , including children, who U do not have the ph ysical, sensor y or mental capabilities to use the machine safely or U are inexperienced or lack knowledge in ho w to use the machine safely must be supervised by a responsible person when using it, or must be instructed in how to use it correctly .
9 1 Preparing and using for the first time 1 Preparing and using for the first time Visit us on the Internet. On the JURA website (www .jura.com) you will find int eresting and up-to -date information on y our GIGA and on every aspec t of coffee .
10 1 Preparing and using for the first time The bean containers have an aroma preservation cov er . This will ensure that your coff ee beans retain their aroma for longer . Coffee beans which hav e been treated with additiv es (e.g. sugar), ground coffee or freez e-dried coffee will damage the grinders.
11 1 Preparing and using for the first time Precondition: The bean containers have been filled. T Connect the mains cable to the machine. T Inser t the mains plug into a pow er socket. 3 T Swit ch on the GIGA using the power switc h on the back of the machine .
12 1 Preparing and using for the first time T Place a receptacle under the dual spout. k T Press the Rotar y Swit ch. ‘System is filling. ’ , the system fills up with water . The opera- tion stops automatically . ‘Welc ome to JURA’ , ‘Mac hine is heating.
13 1 Preparing and using for the first time T Place a receptacle under the dual spout. k T Press the Rotar y Swit ch. ‘Machine is rinsing. ’ , the machine rinses. The operation stops automatically . ‘Please select produc t:’ appears on the display .
14 1 Preparing and using for the first time Y ou can find out what the water hardness is b y using the Aquadur® test strip supplied as standard. T Hold the test strip briefly (for 1second) under flo wing wat er . Shake off the w ater . T Wait f or about 1minute .
15 2 Preparation 2 Prepar ation E While a product is being prepared, you can stop preparation at any time . T o do this, press the Rotar y Switch k or the ‘ ’ button. E During preparation, you can c hange the preset amounts (e.g. amount of milk foam or w ater) b y turning the Rotary Switch g .
16 2 Preparation On the display (star t screen), you will see v arious produc ts, which you can prep are by simply pr essing the corresponding button. A speciality coffee display ed on the star t screen is alwa ys prepared in the same wa y . Example : Proceed as follo ws to prepare one coffee .
17 2 Preparation As soon as you turn the Rotary Switch, more products are displayed in a product selec tor . E The product selec tor view disappears automatically after 5seconds if no prepar ation is star ted. Example : Proceed as follows to prepare a milky coffee using the product selec tor .
18 2 Preparation Example : Proceed as follows to prepar e one coffee using ground coffee . Precondition: ‘Please select produc t:’ is display ed. T Place a cup under the dual spout. T Open the cover of the filler funnel f or ground coffee .
19 2 Preparation T Press any button as soon as there is sufficient coffee in the cup. Preparation stop s. ‘Saved ’ appears briefly on the display . The set amount of wat er for one coffee is permanently st ored. ‘Please select produc t:’ appears on the display .
20 2 Preparation Example : Proceed as follo ws to prepare a coffee with c offee beans from the grinder on the left. Precondition: ‘Please select product:’ is displayed. ‘Beans à la carte’ mode is activated. T Place a cup under the dual spout.
21 2 Preparation Example : Proceed as f ollows to prepare c offee and hot w ater at the same time. Precondition: ‘Please select produc t:’ is display ed. The ‘simult ane- ous preparation ’ function has been activated. T Place one cup under the dual spout and another under the hot -water spout.
22 2 Preparation ‘Hot wat er’ , hot water flo ws into the cup . Preparation st ops automatically when the preset amount of wat er is reached. ‘Please select produc t:’ appears on the display . The professional steam lance on y o ur GIGA has a temperature sen- sor .
23 3 Daily operation 3 Daily oper ation When the GIGA is switched on, it automatically prompts you to per - form the rinse oper ation. Start the rinse operation by pressing the Rotary Switch k .
24 3 Daily operation E In the interests of hygiene , we recommend c hanging the milk pipe on a regular basis (approx. e very 6 months). Replacement pipes are av ailable from specialised dealers. When you switc h off your GIGA, the dual spout is rinsed automati- cally .
25 4 Permanent settings in programming mode 4 Permanent settings in progr amming mode Press the P button to enter progr amming mode. Y ou can navigate through the programme it ems and permanently save the required settings simply by turning the R otar y S witch and using the multi- function buttons.
26 4 Permanent settings in programming mode Programme it em Sub-item Explanation ‘Information (5/5)’ ‘Product counter’ , ‘Day c ounter’ , ‘Maintenance count er’ , ‘V ersion’ T K eep track of all products prepared and view the number of maintenanc e programmes performed.
27 4 Permanent settings in programming mode Product Coffee strength Amount More settings T wo portions of milk foam, two por tions of milk – Milk: 0sec.
28 4 Permanent settings in programming mode T Press the ‘Latte macchiato ’ button. T Press the ‘ Amount of milk’ button. T Press the ‘+’ or ‘–’ button to change setting f o r the amount of milk to ‘6sec. ’ . T Press the ‘Sav e’ button.
29 4 Permanent settings in programming mode T Press the ‘Sav e’ button. ‘Saved ’ appears briefly on the display . ‘Set consistency of grind’ O T Press the P button to exit programming mode .
30 4 Permanent settings in programming mode T Press the ‘Maintenance settings ’ button. ‘Maintenance settings ’ T Press the ‘Rinse the milk system’ butt on. ‘Rinse the milk system’ T Press the ‘Manual immediate’ butt on.
31 4 Permanent settings in programming mode In the programme it em ‘Machine settings (3/5)’ / ‘Sa ve energy’ yo u can permanently set an energy-saving mode (Energy Sav e Mode , E.S.M. © ): U ‘Save No ’ U All speciality coffees, speciality coffees with milk, hot wat er and steam can be prepared without having to w ait.
32 4 Permanent settings in programming mode Y ou already set the time and date during first -time use. Y ou can change this setting. E For the time format, y ou can choose bet ween ‘24 hrs’ and ‘ AM / PM’ (see Chapter 4 ‘Permanent settings in progr amming mode – Units’).
33 4 Permanent settings in programming mode Precondition: ‘Please select product:’ is displayed. O T Press the P button. ‘Maintenance status (1/5)’ g T T urn the Rotary Switch until the progr amme item ‘Machine settings (3/5)’ is display ed.
34 4 Permanent settings in programming mode Precondition: ‘Please select product:’ is displayed. O T Press the P button. ‘Maintenance status (1/5)’ g T T urn the Rotary Switch until the progr amme item ‘Machine settings (3/5)’ is display ed.
35 4 Permanent settings in programming mode In the programme it em ‘Machine settings (3/5)’ / ‘F ac tory setting’ you can reset v arious settings to their factory settings: U ‘ All product s’ U The settings (amount of wat er , coffee strength, temper ature etc.
36 4 Permanent settings in programming mode g T T urn the Rotary Switch until the progr amme item ‘Machine settings (4/5)’ is display ed. T Press the ‘Choose language ’ button. ‘Choose language ’ E T o display more languages, press the ‘Next’ button (bottom right).
37 4 Permanent settings in programming mode In this programme it em you can set the back ground for the display of your GIGA. E The set background is only displa yed on the start screen. Precondition: ‘Please select produc t:’ is display ed. O T Press the P button.
38 4 Permanent settings in programming mode E Y ou can also view the number of product s prepared in the product selec tor . T o do this, turn the Rotar y Switc h. T Press any button or the Rotary Switch to exit the progr amme item. ‘Information (5/5)’ O T Press the P button to exit programming mode .
39 5 Maintenance 5 Maintenance Y our GIGA has the following integrat ed maintenance progr ammes: U Rinsing the coffee system ( ‘Rinse the c offee system ’ ) U Rinsing the milk system in the dual s.
40 5 Maintenance Depending on the setting in programming mode , the G IGA prompts you to rinse the milk syst em or automatically performs rinsing fol- lowing milk prepar ation. Example : Proceed as follows to rinse the milk system when prompted to do so.
41 5 Maintenance T Place another receptacle under the dual spout. T Press the ‘Next’ button. ‘Milk system is being cleaned. ’ , water flo ws out of the dual spout. ‘Wat er for cleaning milk system. ’ T Rinse the receptacle thoroughly , fill it with 250 ml of fresh wat er and immerse the milk pipe in the water .
42 5 Maintenance T Carefully pull the bottom par t of the milk system down and off. T Remov e the milk system from the dual spout. T Remov e the air intake pipe . T Dismantle the milk system into its individual par ts. T Rinse all the par ts under running water .
43 5 Maintenance T Fit the air intake pipe. T Fit the assembled individual par ts back in the dual spout and press it firmly . T Attach the bottom part of the milk system to the par t already inserted from below. T Fit the c over of the dual spout.
44 5 Maintenance The professional steam lance must be dismantled and rinsed daily if milk has been frothed or heated to mak e sure it functions per fectly and also in the interests of hygiene . E Y our GIG A is supplied with two spanners to dismantle the pro - fessional steam lance and two brushes to c lean the two metal tubes.
45 5 Maintenance E Once the amount of water spec ified by the JURA service tech- nician has flow ed through the filter , the filter will cease to work.
46 5 Maintenance E Do not interrupt the cleaning progr amme. The quality of cleaning will be impaired if you do so . E JURA cleaning tablet s are av aila ble from specialised dealers. Example : Proceed as follo ws to clean when prompted t o do so. Precondition: ‘Clean machine .
47 5 Maintenance The GIGA builds up deposit s of limescale ov er time and automati- cally prompts you to descale it when necessary. The degree of calc i- fication depends on the hardness of your w ater . If the descaling agent comes into contact with the skin or eyes, this can cause irritation.
48 5 Maintenance T Completely dissolv e 6JURA descaling tablet s in a receptacle holding 1000ml of w ater . This may take sev eral minut es. T Pour the solution into the empty water tank and inser t it into the machine . ‘Press the Rotary Switch.
49 5 Maintenance Coffee beans may be c ov ered with a slight oil film which remains on the walls of the bean c ontainers. These traces may negativ ely affect the coffee result. F or this reason clean the bean containers from time to time . Precondition: ‘Fill bean container .
50 6 Display messages 6 Display messages Message Cause/Result Action ‘Empty coffee grounds container . ’ The coffee grounds container is full. Y ou cannot prepare any product s. T Empty the coffee grounds container and the drip tra y (see Chapter 3 ‘Daily oper ation – Daily maintenance ’).
51 6 Display messages Message Cause/Result Action ‘Change filter . ’ Once the amount of wat er specified by the JURA service technician has flowed through the filt er , the filter will cease to w ork. Y our GIGA will automatically prompt you to change the filter .
52 7 T roubleshooting 7 T roubleshooting Problem Cause/Result Action Insufficient foam is produced when the milk is frothed, or milk spra ys from the dual spout. The dual spout is dirt y . T Rinse and clean the dual spout (see Chapter 5 ‘Maintenanc e – Cleaning the milk system’).
53 7 T roubleshooting Problem Cause/Result Action ‘Error 2’ is display ed. If the machine w as exposed to the cold f or a long period of time, heating is disabled for safety reasons. T W arm the machine at room temper a - ture. Other ‘Error’ messages are display ed.
54 8 T ransport and environmentally friendly disposal 8 T ransport and environmentally friendly disposal In order to protect the GIGA from frost during transport, the system must be emptied. Precondition: ‘Please select product:’ is displayed. T Place receptacles under the dual spout, the hot -wat er spout and the steam lance .
55 9 T echnical data 9 T echnical data V olt age 220 – 240V~, 50Hz Pow er 2300W Airborne noise emitted L P <70dB (A) Ambient conditions Humidity max. 80% Ambient temper ature 10 – 35°C Conformity mark A S Energy consumption ‘Save energy’ / ‘Sa ve No ’ approx.
56 10 Index 10 Index A Addresses 60 Aroma preservation cover Bean container with aroma preser vation cov er 4 Automatic switch-off 32, 33 Automatic switch-on 32 B Background 37 Bean container Bean con.
57 10 Index G Grinder Activating the grinder selection 19 Setting the consistency of grind 28 Ground coffee 17 Measuring spoon for ground coffee 4 H Hotline 60 Hot wat er 21 Hot -water spout Height -a.
58 10 Index Restore f actor y settings 35 Setting the consistency of grind 28 Setting the wat er hardness 30 Time and date 32 Timer 32 Units 34 Proper use 6 Q Quer ying information 37 Quick installati.
59.
60 11 JURA contact details/ Legal information 11 JURA contact det ails/ Legal information JURA Elektroapparat e AG Kaffee weltstrasse 10 CH-4626 Niederbuchsiten T el.
デバイスJura GIGA X9c Professionalの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Jura GIGA X9c Professionalをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJura GIGA X9c Professionalの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Jura GIGA X9c Professionalの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Jura GIGA X9c Professionalで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Jura GIGA X9c Professionalを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJura GIGA X9c Professionalの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Jura GIGA X9c Professionalに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJura GIGA X9c Professionalデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
