JVCメーカーCA-MXGT700の使用説明書/サービス説明書
ページ先へ移動 of 38
COMP ACT COMPONENT SYSTEM SISTEMAS DE COMPONENTES COMPACTOS SISTEMA DE COMPONENTE COMPACTO For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference.
– G-1 – Caution –– STANDBY/ON button! Disconnect the mains plug to shut the power off completely. The STANDBY/ON button in any position does not disconnect the mains line.
– G-2 – CAUTION T o reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. CAUTION • Do not block the ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc.
Caution: Proper V entilation T o avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1 Front: No obstructions and open spacing. 2 Sides/ T op/ Back: No obstructions should be placed in the areas shown by the dimensions below .
IMPORTANT FOR LASER PRODUCTS IMPORTANTE PARA PRODUCTOS LÁSER IMPOTANTE PARA PRODUCTOS LASER REPRODUCTION OF LABELS / REPRODUCCI Ó N DE ETIQUETAS / REPRODU ÇÃ O DE ETIQUETAS 2 WARNING LABEL, PLACED INSIDE THE UNIT CLASS 1 LASER PRODUCT 1. CLASS 1 LASER PRODUCT 2.
– 1 – English Introduction About This Manual This manual is org anized as follows: • The manual mainly explains operations using the buttons and contr ols on the unit. Y ou can also use the buttons on the r emote control if they ha ve the same or similar names (or marks) as those on the unit.
– 2 – English Contents Location of the Buttons and Controls ....................... 3 Front Panel ................................................................. 3 Remote Control .......................................................... 5 Getting Started .
– 3 – English Location of the Buttons and Controls Become familiar with the b uttons and controls on your unit. Front Panel DISC CHANGE ST ANDBY/ON STANDBY CD-R/RW PLAYBACK CLOCK /TIMER DISPLA Y P.
– 4 – English See pages in the parentheses for details. Front Panel 1 ST ANDBY/ON button and ST ANDBY lamp (10, 11) 2 CLOCK/TIMER button (10, 22 – 24) 3 DISPLA Y button (10) 4 PRESET +/– butto.
– 5 – English Remote Control Remote Control 1 ST ANDBY/ON button (10) 2 SLEEP button (24) 3 A UX b utton (11) Pr essing this button also turns on the unit. 4 Number buttons (13, 15) 5 KARA OKE button (21) 6 T APE 3 button (11, 18) Pr essing this button also turns on the unit.
– 6 – English 1 Attach the FM antenna to the FM [75 Ω ] coaxial terminal. 2 Extend the FM antenna. 3 Fasten it up in the position which gi ves y ou the best reception, then f ix it on the wall, etc. About the supplied FM antenna The FM antenna supplied with this unit can be used as temporary measure.
– 7 – English 1 Press and hold the clamp of the AM terminal on the rear of the unit. 2 Insert the end of the AM loop antenna cord into the terminal. • If the AM loop antenna wire is cov ered with vinyl, remo ve the vinyl by twisting it as shown in the diagram.
– 8 – English Connecting Other Equipment Y ou can connect both analog and digital equipment. • DO NOT connect any equipment while the power is on.
– 9 – English Canceling the Display Demonstration When connecting the A C po wer cord into a wall outlet, the unit automatically starts display demonstration. On the unit ONL Y : T o cancel the display demonstration, press CANCEL/DEMO. When you pr ess other buttons The display demonstration stops temporarily .
– 10 – English 3 Press 4 or ¢ to adjust the minute, then press SET . T o check the clock time Press DISPLA Y while playing an y source. • Each time you press the button, the source indication and the clock time alternate on the display .
– 11 – English Adjusting the Volume Y ou can adjust the v olume level only while the unit is tur ned on. T urn the VOLUME contr ol clockwise to increase the v olume or counterclockwise to decr ease it. • The volume le vel can be adjusted in 32 steps (V OL MIN, V OL 1 — V OL 30, and V OL MAX).
– 12 – English Reinforcing the Bass Sound This function only af fects the playback sound , not your recording. T urn the SUBWOOFER LEVEL control clockwise to incr ease the subwoofer sound or counter clockwise to decrease it. • The subwoofer le vel can be adjusted in 4 steps (LEVEL 1 — LEVEL 4.
– 13 – English On the unit ONL Y : 1 T une in the station y ou want to preset (in this example, of FM 87.50). • See “T uning in a Station. ” 2 Press SET . 3 Press PRESET + or PRESET – to select a preset number . 4 Press SET again. The tuned station in step 1 is stored in the preset number selected in step 3 .
– 14 – English 3 If y ou wish to load a third disc, press DISC CHANGE on the unit or DISC SKIP on the r emote control. The disc tray rotates by 120˚. 4 Press 0 again. The carrousel closes. About the disc indicators Each disc indicator corresponds to the disc tray of the same number .
– 15 – English 3 Press one of the disc number buttons (CD1, CD2 or CD3) f or the disc you want to start to play fr om. CD play starts from the first track of the selected disc. • Pressing CD 6 instead of the disc number buttons starts playing back if a CD is on the trays.
– 16 – English Programing the Playing Order of the T racks —– Program Play Y ou can arrange the order in which the tracks play bef ore you start playing. Y ou can pr ogram up to 32 tracks. • T o use Repeat play (see page 17) for Program play , press REPEA T after starting Program play .
– 17 – English Playing at Random —– Random Play The tracks of the selected CD will play at random. • T o use Random play , you hav e to cancel the Program play . 1 Load a CD. 2 Press one of the disc number buttons (CD1, CD2, and CD3) f or the disc you want to play , then press 7 .
– 18 – English Playing Back T apes Playing Back a T ape 1 Press EJECT ( 0 ) f or the deck you want to use. 2 Put a cassette in, with the exposed part of the tape down and the side y ou want to play facing front. • Y ou can play back only type I tapes.
– 19 – English Recording a T ape on Deck B On the unit ONL Y : 1 Press EJECT 0 f or deck B. 2 Put a recordable cassette in, with the exposed part of the tape down and the side y ou want to record facing fr ont. 3 Close the cassette holder gently .
– 20 – English CD Synchronized Recording Y ou can easily record a CD onto a tape. • Y ou can also record the tracks in order you hav e made the program. On the unit ONL Y : 1 Put a recordable cassette into deck B. 2 Place a disc correctly on the r ecess of the disc tray , with its label side up.
– 21 – English T o apply an echo to your voice Press ECHO on the remote control so that the echo ( ) indicator lights up on the display . Each time you press the button, the echo le vel changes as follo ws: ECHO 2 applies stronger echo effect to your v oice.
– 22 – English 2 Press CLOCK/TIMER again. “ON TIME” appears for 2 seconds, then the unit enters on-time setting mode. 3 Set the on-time y ou want the unit to turn on. 1) Press 4 or ¢ to set the hour , then press SET . 2) Press 4 or ¢ to set the minute, then press SET .
– 23 – English 6 Select the preset station number . Press 4 or ¢ to select the preset station number , then press SET . The unit enters volume setting mode. 7 Press 4 or ¢ to set the v olume level. • Y ou can select the volume le vel from V OL MIN, VOL 1 — V OL 30, and V OL MAX.
– 24 – English 4 Set the on-time y ou want the unit to turn on. 1) Press 4 or ¢ to set the hour , then press SET . 2 ) Press 4 or ¢ to set the minute, then press SET . “OFF TIME” appears for 2 seconds, then the unit enters off-time setting mode.
– 25 – English Maintenance T o get the best performance of the unit, keep your discs, tapes, and mechanism clean. Handling cassette tapes • If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating.
– 26 – English Action Press CANCEL/DEMO on the unit. (See page 9.) Check all connections and make corrections. (See pages 6 to 8.) • Reconnect the antennas correctly and securely . • Change the position and direction of the AM loop antenna. • Extend the FM antenna at the best position.
– 27 – English CA-MXGT700 Amplifier section Output Power SUBWOOFERS : 110 W per channel, min. RMS, driv en into 6 Ω at 63 Hz with no more than 10% total harmonic distortion. MAIN SPEAKERS : 55 W per channel, min. RMS, driven into 4 Ω at 1 kHz with no more than 10% total harmonic distortion.
– 28 – English CA-MXG500 Amplifier section Output Power SUBWOOFERS : 80 W per channel, min. RMS, driv en into 6 Ω at 63 Hz with no more than 10% total harmonic distortion. MAIN SPEAKERS : 40 W per channel, min. RMS, driven into 4 Ω at 1 kHz with no more than 10% total harmonic distortion.
ANTENNA FM 75 AM [ ] VOLT AGE SETTING 220 12 7 240 110 230- 220 127 240 11 0 VOL T AGE SETTING 230- AUX IN MAIN SPEAKER SUBWOOFER [ ] RR LL [ ] 4-8 6-16 DIGITAL OUT (OPTICAL) VICTOR COMP ANY OF JAP AN , LIMITED 0502KSMMDWSAM EN, SP, PR J V C Mains (AC) Line Instruction (not applicable for Europe, U.
VICTOR COMPANY OF JAPAN, LIMITED EN. SP . PR. 0205NSMMD WSAM SPEAKER SYSTEM SP-MXG500 MANU AL DE INSTRUCCIONES: SISTEMA DE AL T A V OCES INSTRUÇÒES: SISTEMA DE AL TIF ALANTES Thank you f or purchasing JVC speakers . Bef ore you begin using them, please read the instructions carefully to be sure you get the best possib le performance.
Connection Conexión Ligaçao CONNECTION • DON'T use other amplifier to operate this speak er system except for CA-MXG500. • T urn off power to the whole system bef ore connecting the speak- ers to the amplifier . • The maximum power handling capacity of the SP-MXG500 main speaker is 40 W/subwoof er is 80 W .
Connection Conexión Ligaçao CONNECTION • DON'T use other amplifier to operate this speak er system except for CA-MXG500. • T urn off power to the whole system bef ore connecting the speak- ers to the amplifier . • The maximum power handling capacity of the SP-MXG500 main speaker is 40 W/subwoof er is 80 W .
VICTOR COMPANY OF JAPAN, LIMITED EN. SP . PR. 0205NSMMD WSAM SPEAKER SYSTEM SP-MXG500 MANU AL DE INSTRUCCIONES: SISTEMA DE AL T A V OCES INSTRUÇÒES: SISTEMA DE AL TIF ALANTES Thank you f or purchasing JVC speakers . Bef ore you begin using them, please read the instructions carefully to be sure you get the best possib le performance.
デバイスJVC CA-MXGT700の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
JVC CA-MXGT700をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC CA-MXGT700の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC CA-MXGT700の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC CA-MXGT700で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC CA-MXGT700を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC CA-MXGT700の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC CA-MXGT700に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC CA-MXGT700デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。