JVCメーカーGET0425-001Aの使用説明書/サービス説明書
ページ先へ移動 of 198
ENGLISH ESPAÑOL FRANÇAIS CD RECEIVER KD-APD58/KD-PDR50 RECEPTOR CON CD KD-APD58/KD-PDR50 RÉCEPTEUR CD KD-APD58/KD-PDR50 For canceling the display demonstration, see page 6. Para cancelar la demostración en pantalla, consulte la página 6. Pour annuler la démonstration des affichages, référez-vous à la page 6.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit.
ENGLISH 3 How to reset your unit • Your preset adjustments will also be erased. How to forcibly eject a disc “PLEASE” and “EJECT” appear alternately on the display. • Be careful not to drop the disc when it ejects. • If this does not work, reset your unit.
4 ENGLISH 1 SRC (source) button 2 B BAND button 3 (standby/on attenuator) button / Control dial 4 SEL (select) button 5 Display window 6 5 (up) / ∞ (down) buttons 7 EQ (equalizer) button 8 0 (eject).
ENGLISH 5 Remote controller — RM-RK50 Installing the lithium coin battery (CR2025) For USA-California Only: This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material—special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate Aim the remote controller directly at the remote sensor on the unit.
6 ENGLISH To drop the volume in a moment (ATT) To restore the sound, press the button again. To turn off the power Basic settings • See also “General settings — PSM” on pages 13 and 14. 1 2 1 Canceling the display demonstrations Select “DEMO,” then “DEMO OFF.
7 ENGLISH Radio operations ~ Ÿ ! Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again. To tune in to a station manually In step ! above... 1 2 Select a desired station frequency. Lights up when receiving an FM stereo broadcast with sufficient signal strength.
8 ENGLISH Disc operations Playing a disc in the unit All tracks will be played repeatedly until you change the source or eject the disc. To stop play and eject the disc • Press SRC to listen to another playback source.
9 ENGLISH To select a particular track in a folder (for MP3 or WMA discs): Other main functions Skipping tracks quickly during play • For MP3 or WMA discs, you can skip tracks within the same folder. Ex.: To select track 32 while playing a track whose number is a single digit (1 to 9) 1 2 Each time you press the button, you can skip 10 tracks.
10 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. 7 Repeat play Mode Plays repeatedly TRK RPT : The current track. FLDR RPT * : All tracks of the current folder.
11 ENGLISH Caution: • Avoid using the iPod if it might hinder your safety driving. • Make sure all important data has been backed up to avoid losing the data.
12 ENGLISH Indication, [Range] BAS * 2 (bass), [–06 to +06] Adjust the bass. MID * 2 (mid-range), [–06 to +06] Adjust the mid-range frequencies sound level. TRE * 2 (treble), [–06 to +06] Adjust the treble. FAD * 3 (fader), [R06 to F06] Adjust the front and rear speaker balance.
ENGLISH 13 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure. You can change PSM (Preferred Setting Mode) items listed in the table that follows.
14 ENGLISH Indications Item ( : Initial) Setting, [reference page] SCROLL * 2 Scroll • ONCE • AUTO • OFF : Scrolls the track information once. : Repeats scrolling (at 5-second intervals). : Cancels. • Pressing D DISP for more than one second can scroll the display regardless of the setting.
ENGLISH 15 External component operations You can connect an external component to the AUX (auxiliary) input jack on the control panel. ~ Ÿ Turn on the connected component and start playing the source. ! Adjust the volume. ⁄ Adjust the sound as you want.
16 ENGLISH More about this unit Basic operations Turning on the power • By pressing SRC on the unit, you can also turn on the power. If the source is ready, playback also starts.
ENGLISH 17 • This unit cannot play back the following files: – MP3 files encoded with MP3i and MP3 PRO format. – MP3 files encoded in an inappropriate format. – MP3 files encoded with Layer 1/2. – WMA files encoded with lossless, professional, and voice format.
18 ENGLISH Title assignment • If you try to assign titles to more than 30 station frequencies, “NAMEFULL” appears. Delete unwanted titles before assignment. General settings—PSM • “AUTO” setting for “DIMMER” may not work correctly on some vehicles, particularly on those having a control dial for dimming.
ENGLISH 19 Hierarchical structure of file searching when an iPod is connected EN12-19_KD-APD58_50[J]f.indd 19 EN12-19_KD-APD58_50[J]f.indd 19 11/8/06 2:43:14 PM 11/8/06 2:43:14 PM.
20 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
ENGLISH 21 Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 3). FM/AM • SSM automatic presetting does not work.
22 ENGLISH Symptoms Remedies/Causes MP3/WMA playback • Tracks do not play back in the order you have intended them to play. Playback order is determined when the files are recorded. • Elapsed playing time is not correct. This sometimes occurs during play.
ENGLISH 23 Specifications AUDIO AMPLIFIER SECTION Power Output: 20 W RMS × 4 Channels at 4 Ω and ≤ 1% THD+N Signal-to-Noise Ratio: 80 dBA (reference: 1 W into 4 Ω) Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range: Bass/Mid-range/Treble: ±12 dB at 60 Hz/1 kHz/ 7.
Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! EN, SP, FR 1106DTSMDTJEIN © 2006 Victor Company of Japan, Limited Rear_KD-APD58_50[J]3.
1 KD-APD58/KD-PDR50 Installation/Connection Manual Manual de instalación/conexión Manuel d’installation/raccordement GET0425-002A [J] L Handles Manijas Poignées H Washer (ø5) Arandela (ø5) Rond.
2 When using the optional stay / Cuando emplea un soporte opcional / Lors de l’utilisation du hauban en option Note : When installing the unit on the mounting bracket, make sure to use the 8 mm (3/8") -long screws. If longer screws are used, they could damage the unit.
3 A Typical connections / Conexiones tipicas / Raccordements typiques Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color.
4 Set “L/O MODE” to “REAR” (See page 14 of the INSTRUCTIONS.) Ajuste “L/O MODE” a “REAR” (Consulte la página 14 del MANUAL DE INSTRUCCIONES.
ENGLISH FRANÇAIS CD RECEIVER RÉCEPTEUR CD KD-PDR51 For installation and connections, refer to the separate manual. Pour l’installation et les raccordements, se référer au manuel séparé. INSTRUCTIONS MANUEL D’INSTRUCTIONS GET0427-003A [EX/EU] For canceling the display demonstration, see page 6.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
ENGLISH 3 How to use the M MODE button If you press M MODE, the unit goes into functions mode, then the number buttons and 5 / ∞ buttons work as different function buttons.
4 ENGLISH Parts identification Display window Control panel 1 SRC (source) button 2 B BAND button 3 (standby/on attenuator) button / Control dial 4 SEL (select) button 5 Display window 6 5 (up) / ∞ .
ENGLISH 5 Remote controller — RM-RK50 Installing the lithium coin battery (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode.
6 ENGLISH To drop the volume in a moment (ATT) To restore the sound, press the button again. To turn off the power Basic settings • See also “General settings — PSM” on pages 15 – 17. 1 2 1 Canceling the display demonstrations Select “DEMO,” then “DEMO OFF.
ENGLISH 7 Radio operations ~ Ÿ ! Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again. To tune in to a station manually In step ! above... 1 2 Select a desired station frequency. Lights up when receiving an FM stereo broadcast with sufficient signal strength.
8 ENGLISH Manual presetting Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band. 1 2 3 Listening to a preset station 1 2 Select the preset station (1 – 6) you want. or To check the current clock time while listening to an FM (non-RDS) or AM station • For FM RDS stations, see page 10.
9 ENGLISH ! Start searching for your favorite programme. If there is a station broadcasting a programme of the same PTY code as you have selected, that station is tuned in. Storing your favorite programme types You can store six favorite programme types.
10 ENGLISH To check the current clock time while listening to an FM RDS station PTY codes NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M (music), ROCK M (music), EASY M (m.
11 ENGLISH To fast-forward or reverse the track To go to the next or previous tracks To go to the next or previous folders (only for MP3 or WMA discs) To locate a particular track (for CD) or folder (.
12 ENGLISH Changing the display information While playing an audio CD or a CD Text While playing an MP3 or a WMA track • When “TAG DISP” is set to “TAG ON” (see page 17) • When “TAG DISP.
13 ENGLISH Continued on the next page iPod operations You can play songs from an Apple iPod through this unit by connecting it with the supplied connection cable for iPod. • Disconnecting the iPod will also stop playback. Press SRC to listen to another playback source.
14 ENGLISH 3 Confirm the selection. To move back to the previous menu, press 5 . • If a track is selected, playback starts automatically. • If the selected item has another layer, you will enter the layer. Repeat steps 2 and 3 until the desired track is played (see page 21).
15 ENGLISH Indication, [Range] BAS * 2 (bass), [–06 to +06] Adjust the bass. MID * 2 (mid-range), [–06 to +06] Adjust the mid-range frequencies sound level. TRE * 2 (treble), [–06 to +06] Adjust the treble. FAD * 3 (fader), [R06 to F06] Adjust the front and rear speaker balance.
16 ENGLISH Indications Item ( : Initial) Setting, [reference page] DEMO Display demonstration • DEMO ON • DEMO OFF : Display demonstration will be activated automatically if no operation is done for about 20 seconds, [6].
17 ENGLISH Indications Item ( : Initial) Setting, [reference page] DIMMER Dimmer • AUTO • ON • OFF : Dims the display when you turn on the headlights. : Activates dimmer. : Cancels. TEL Telephone muting • MUTING 1/ MUTING 2 • OFF : Select either one which mutes the sounds while using a cellular phone.
18 ENGLISH External component operations You can connect an external component to the AUX (auxiliary) input jack on the control panel. ~ Ÿ Turn on the connected component and start playing the source. ! Adjust the volume. ⁄ Adjust the sound as you want.
19 ENGLISH • If a Traffic Announcement is received by TA Standby Reception, the volume level automatically changes to the preset level (TA VOL) if the current level is lower than the preset level. • When Alternative Frequency Reception is activated (with AF selected), Network-Tracking Reception is also activated automatically.
20 ENGLISH – You can check the software version of your iPod from “About” in the “Setting” menu of the iPod. – For details about updating your iPod, visit <http://www.apple.com>. • When you turn on this unit, the iPod is charged through this unit.
ENGLISH 21 Hierarchical structure of file searching when an iPod is connected EN20-25_KD-PDR51_003A_1.indd 21 EN20-25_KD-PDR51_003A_1.indd 21 11/8/06 4:14:49 PM 11/8/06 4:14:49 PM.
22 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
ENGLISH 23 Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). FM/AM • SSM automatic presetting does not work.
24 ENGLISH Symptoms Remedies/Causes MP3/WMA playback • Tracks do not play back in the order you have intended them to play. Playback order is determined when the files are recorded. • Elapsed playing time is not correct. This sometimes occurs during play.
ENGLISH 25 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
EN, FR 1206DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-.
1 KD-PDR51 Installation/Connection Manual Manuel d’installation/raccordement 1206DTSMDTJEIN EN, FR ENGLISH This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC IN-CAR ENTERTAINMENT dealers.
2 Do the required electrical connections. Réalisez les connexions électriques. * 1 Lorsque vous mettez l’appareil à la verticale, faire attention de ne pas endommager le fusible situé sur l’arrière. * 2 Non fourni avec cet autoradio. Bend the appropriate tabs to hold the sleeve firmly in place.
3 Line out (see diagram ) Sortie de ligne (voir le diagramme ) Rear ground terminal Borne arrière de masse 15 A fuse Fusible 15 A Black Noir Blue with white stripe Bleu avec bande blanche Red Rouge Y.
4 Connecting the external amplifiers and/or subwoofer / Connexion d’amplificateurs extérieurs et/ou d’un caisson de grave You can connect amplifiers to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.
ENGLISH DEUTSCH РУCCKИЙ CD RECEIVER CD-RECEIVER РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ KD-PDR51 For installation and connections, refer to the separate manual. Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
ENGLISH 3 How to use the M MODE button If you press M MODE, the unit goes into functions mode, then the number buttons and 5 / ∞ buttons work as different function buttons.
4 ENGLISH Parts identification Display window Control panel 1 SRC (source) button 2 B BAND button 3 (standby/on attenuator) button / Control dial 4 SEL (select) button 5 Display window 6 5 (up) / ∞ .
ENGLISH 5 Remote controller — RM-RK50 Installing the lithium coin battery (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode.
6 ENGLISH To drop the volume in a moment (ATT) To restore the sound, press the button again. To turn off the power Basic settings • See also “General settings — PSM” on pages 15 – 17. 1 2 1 Canceling the display demonstrations Select “DEMO,” then “DEMO OFF.
ENGLISH 7 Radio operations ~ Ÿ ! Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again. To tune in to a station manually In step ! above... 1 2 Select a desired station frequency. Lights up when receiving an FM stereo broadcast with sufficient signal strength.
8 ENGLISH Manual presetting Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band. 1 2 3 Listening to a preset station 1 2 Select the preset station (1 – 6) you want. or To check the current clock time while listening to an FM (non-RDS) or AM station • For FM RDS stations, see page 10.
9 ENGLISH ! Start searching for your favorite programme. If there is a station broadcasting a programme of the same PTY code as you have selected, that station is tuned in. Storing your favorite programme types You can store six favorite programme types.
10 ENGLISH To check the current clock time while listening to an FM RDS station PTY codes NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M (music), ROCK M (music), EASY M (m.
11 ENGLISH To fast-forward or reverse the track To go to the next or previous tracks To go to the next or previous folders (only for MP3 or WMA discs) To locate a particular track (for CD) or folder (.
12 ENGLISH Changing the display information While playing an audio CD or a CD Text While playing an MP3 or a WMA track • When “TAG DISP” is set to “TAG ON” (see page 17) • When “TAG DISP.
13 ENGLISH Continued on the next page iPod operations You can play songs from an Apple iPod through this unit by connecting it with the supplied connection cable for iPod. • Disconnecting the iPod will also stop playback. Press SRC to listen to another playback source.
14 ENGLISH 3 Confirm the selection. To move back to the previous menu, press 5 . • If a track is selected, playback starts automatically. • If the selected item has another layer, you will enter the layer. Repeat steps 2 and 3 until the desired track is played (see page 21).
15 ENGLISH Indication, [Range] BAS * 2 (bass), [–06 to +06] Adjust the bass. MID * 2 (mid-range), [–06 to +06] Adjust the mid-range frequencies sound level. TRE * 2 (treble), [–06 to +06] Adjust the treble. FAD * 3 (fader), [R06 to F06] Adjust the front and rear speaker balance.
16 ENGLISH Indications Item ( : Initial) Setting, [reference page] DEMO Display demonstration • DEMO ON • DEMO OFF : Display demonstration will be activated automatically if no operation is done for about 20 seconds, [6].
17 ENGLISH Indications Item ( : Initial) Setting, [reference page] DIMMER Dimmer • AUTO • ON • OFF : Dims the display when you turn on the headlights. : Activates dimmer. : Cancels. TEL Telephone muting • MUTING 1/ MUTING 2 • OFF : Select either one which mutes the sounds while using a cellular phone.
18 ENGLISH External component operations You can connect an external component to the AUX (auxiliary) input jack on the control panel. ~ Ÿ Turn on the connected component and start playing the source. ! Adjust the volume. ⁄ Adjust the sound as you want.
19 ENGLISH • If a Traffic Announcement is received by TA Standby Reception, the volume level automatically changes to the preset level (TA VOL) if the current level is lower than the preset level. • When Alternative Frequency Reception is activated (with AF selected), Network-Tracking Reception is also activated automatically.
20 ENGLISH – You can check the software version of your iPod from “About” in the “Setting” menu of the iPod. – For details about updating your iPod, visit <http://www.apple.com>. • When you turn on this unit, the iPod is charged through this unit.
ENGLISH 21 Hierarchical structure of file searching when an iPod is connected EN20-25_KD-PDR51_003A_1.indd 21 EN20-25_KD-PDR51_003A_1.indd 21 11/8/06 4:14:49 PM 11/8/06 4:14:49 PM.
22 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
ENGLISH 23 Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). FM/AM • SSM automatic presetting does not work.
24 ENGLISH Symptoms Remedies/Causes MP3/WMA playback • Tracks do not play back in the order you have intended them to play. Playback order is determined when the files are recorded. • Elapsed playing time is not correct. This sometimes occurs during play.
ENGLISH 25 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
EN, GE, RU 1206DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb? Bitte setzen Sie Ihr Gerät zurück Siehe Se.
1 KD-PDR51 Installation/Connection Manual Einbau/Anschlußanleitung Руководство по установке/подключению 1206DTSMDTJEIN EN, GE, RU ENGLISH This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems .
2 INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician.
3 ENGLISH DEUTSCH A Line out (see diagram ) Schutz kappen Signalausgang (siehe Schaltplan ) К выходу (см. схему ) Rear ground terminal Hintere Erdungsc-anschlußklemme Задний ра.
4 C Connecting the external amplifiers and/or subwoofer / Anschließen der externen Verstärker und/oder Subwoofer / Подключение вне шних усилителей и/или низкочастотного динамика You can connect amplifiers to upgrade your car stereo system.
For canceling the display demonstration, see page 6. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0455-001A [UI] CD RECEIVER KD-PDR54 Cover_KD-PDR54[UI]_f.
2 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
3 How to use the M MODE button If you press M MODE, the unit goes into functions mode, then the number buttons and 5 / ∞ buttons work as different function buttons.
4 Parts identification Display window Control panel 1 SRC (source) button 2 B BAND button 3 (standby/on attenuator) button / Control dial 4 SEL (select) button 5 Display window 6 5 (up) / ∞ (down) b.
5 Remote controller — RM-RK50 Installing the lithium coin battery (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode.
6 To drop the volume in a moment (ATT) To restore the sound, press the button again. To turn off the power Basic settings • See also “General settings — PSM” on pages 13 and 14. 1 2 1 Canceling the display demonstrations Select “DEMO,” then “DEMO OFF.
7 Radio operations ~ Ÿ ! Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again. To tune in to a station manually In step ! above... 1 2 Select a desired station frequency. Lights up when receiving an FM stereo broadcast with sufficient signal strength.
8 Manual presetting Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band. 1 2 3 Listening to a preset station 1 2 Select the preset station (1 – 6) you want. or To check other information while listening to the radio * If no name is assigned to a station, “NO NAME” appears.
9 To select a particular track in a folder (for MP3 or WMA disc): Other main functions Skipping tracks quickly during play • For MP3 or WMA discs, you can skip tracks within the same folder. Ex.: To select track 32 while playing tracks whose number is a single digit (1 to 9) 1 2 Each time you press the button, you can skip 10 tracks.
10 Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. 7 Repeat play Mode Plays repeatedly TRK RPT : The current track. FLDR RPT * : All tracks of the current folder. RPT OFF : Cancels.
11 Caution: • Avoid using the iPod if it might hinder your safety driving. • Make sure all important data has been backed up to avoid losing the data. To pause playback To resume playback, press the button again. To fast-forward or reverse the track To go to the next or previous tracks Selecting a track from the menu 1 Enter the main menu.
12 Sound adjustments You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer). Indication (For) BAS * 1 MID * 2 TRE * 3 S.
13 You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 2 Select a PSM item. 3 Adjust the PSM item selected. General settings — PSM 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure.
14 Indications Item ( : Initial) Setting, [reference page] SCROLL * 2 Scroll • ONCE • AUTO • OFF : Scrolls the track information once. : Repeats scrolling (at 5-second intervals). : Cancels. • Pressing D DISP for more than one second can scroll the display regardless of the setting.
15 External component operations You can connect an external component to the AUX (auxiliary) input jack on the control panel. ~ Ÿ Turn on the connected component and start playing the source. ! Adjust the volume. ⁄ Adjust the sound as you want. (See page 12.
16 More about this unit Basic operations Turning on the power • By pressing SRC on the unit, you can also turn on the power. If the source is ready, playback also starts. Turning off the power • If you turn off the power while listening to a track, playback starts from where it has been stopped previously, next time you turn on the power.
17 • This unit cannot play back the following files: – MP3 files encoded with MP3i and MP3 PRO format. – MP3 files encoded in an inappropriate format. – MP3 files encoded with Layer 1/2. – WMA files encoded with lossless, professional, and voice format.
18 Title assignment • If you try to assign titles to more than 30 station frequencies, “NAMEFULL” appears. Delete unwanted titles before assignment. General settings—PSM • “AUTO” setting for “DIMMER” may not work correctly on some vehicles, particularly on those having a control dial for dimming.
19 Hierarchical structure of file searching when an iPod is connected EN16-23_KD-PDR54[UI]_f.indd 19 EN16-23_KD-PDR54[UI]_f.indd 19 11/23/06 3:00:02 PM 11/23/06 3:00:02 PM.
20 Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
21 Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). FM/AM • SSM automatic presetting does not work.
22 Symptoms Remedies/Causes MP3/WMA playback • Tracks do not play back in the order you have intended them to play. Playback order is determined when the files are recorded. • Elapsed playing time is not correct. This sometimes occurs during play.
23 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
© 2006 Victor Company of Japan, Limited EN 1206DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_KD-PDR54[UI]_f.
1 KD-PDR54 Installation/Connection Manual GET0455-002A [UI] L Handles H Washer (ø5) I Lock nut (M5) J Mounting bolt (M5 × 20 mm) A / B Hard case/Control panel C Sleeve D Trim plate E Power cord This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems .
2 Connecting the external amplifier or subwoofer A Typical connections Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color.
ENGLISH For canceling the display demonstration, see page 6. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0426-001A [U/UH] KD-PDR55 CD RECEIVER KD-PDR55 Cover_KD-PDR55[U_UH]1.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
ENGLISH 3 How to use the M MODE button If you press M MODE, the unit goes into functions mode, then the number buttons and 5 / ∞ buttons work as different function buttons.
4 ENGLISH Parts identification Display window Control panel 1 SRC (source) button 2 B BAND button 3 (standby/on attenuator) button / Control dial 4 SEL (select) button 5 Display window 6 5 (up) / ∞ .
ENGLISH 5 Remote controller — RM-RK50 Installing the lithium coin battery (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode.
6 ENGLISH To drop the volume in a moment (ATT) To restore the sound, press the button again. To turn off the power Basic settings • See also “General settings — PSM” on pages 13 and 14. 1 2 1 Canceling the display demonstrations Select “DEMO,” then “DEMO OFF.
ENGLISH 7 Radio operations ~ Ÿ ! Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again. To tune in to a station manually In step ! above... 1 2 Select a desired station frequency. Lights up when receiving an FM stereo broadcast with sufficient signal strength.
8 ENGLISH Manual presetting Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band. 1 2 3 Listening to a preset station 1 2 Select the preset station (1 – 6) you want. or To check other information while listening to the radio * If no name is assigned to a station, “NO NAME” appears.
9 ENGLISH To select a particular track in a folder (for MP3 or WMA disc): Other main functions Skipping tracks quickly during play • For MP3 or WMA discs, you can skip tracks within the same folder. Ex.: To select track 32 while playing tracks whose number is a single digit (1 to 9) 1 2 Each time you press the button, you can skip 10 tracks.
10 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. 7 Repeat play Mode Plays repeatedly TRK RPT : The current track. FLDR RPT * : All tracks of the current folder.
11 ENGLISH Caution: • Avoid using the iPod if it might hinder your safety driving. • Make sure all important data has been backed up to avoid losing the data.
12 ENGLISH Sound adjustments You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer). Indication (For) BAS * 1 MID * 2 TRE * 3 S.
13 ENGLISH You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 2 Select a PSM item. 3 Adjust the PSM item selected. General settings — PSM 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure.
14 ENGLISH Indications Item ( : Initial) Setting, [reference page] SCROLL * 2 Scroll • ONCE • AUTO • OFF : Scrolls the track information once. : Repeats scrolling (at 5-second intervals). : Cancels. • Pressing D DISP for more than one second can scroll the display regardless of the setting.
15 ENGLISH External component operations You can connect an external component to the AUX (auxiliary) input jack on the control panel. ~ Ÿ Turn on the connected component and start playing the source. ! Adjust the volume. ⁄ Adjust the sound as you want.
16 ENGLISH More about this unit Basic operations Turning on the power • By pressing SRC on the unit, you can also turn on the power. If the source is ready, playback also starts.
ENGLISH 17 • This unit cannot play back the following files: – MP3 files encoded with MP3i and MP3 PRO format. – MP3 files encoded in an inappropriate format. – MP3 files encoded with Layer 1/2. – WMA files encoded with lossless, professional, and voice format.
18 ENGLISH Title assignment • If you try to assign titles to more than 30 station frequencies, “NAMEFULL” appears. Delete unwanted titles before assignment. General settings—PSM • “AUTO” setting for “DIMMER” may not work correctly on some vehicles, particularly on those having a control dial for dimming.
ENGLISH 19 Hierarchical structure of file searching when an iPod is connected EN16-23_KD-PDR55[U_UH]f.indd 19 EN16-23_KD-PDR55[U_UH]f.indd 19 11/8/06 3:28:50 PM 11/8/06 3:28:50 PM.
20 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
ENGLISH 21 Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). FM/AM • SSM automatic presetting does not work.
22 ENGLISH Symptoms Remedies/Causes MP3/WMA playback • Tracks do not play back in the order you have intended them to play. Playback order is determined when the files are recorded. • Elapsed playing time is not correct. This sometimes occurs during play.
ENGLISH 23 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
© 2006 Victor Company of Japan, Limited EN, TH 1206DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_KD-PDR55[U_UH]f.
1 KD-PDR55 Installation/Connection Manual °“√µ‘¥µ—Èß/§ŸË¡◊Õ°“√µ‘¥µ—Èß GET0426-006A [U/UH] ENGLISH This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.
2 When using the optional stay / ‡¡◊ËÕ„™Èµ—«¬÷¥·∫∫‡≈◊Õ°‰¥È Removing the unit Before removing the unit, release the rear section. INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation.
3 A Typical connections / °“√‡™◊ËÕ¡µËÕ·∫∫ª°µ Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color.
4 Connecting the external amplifier or subwoofer / µËÕ·Õ¡ª≈‘ø“¬‡ÕÕ√ÏÀ√◊Õ´—∫«Ÿø‡øÕ√ϥȓππÕ B You can connect amplifier to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.
ENGLISH INDONESIA CD RECEIVER KD-PDR55 ALA T PENERIMA CD KD-PDR55 For canceling the display demonstration, see page 6. Untuk membatalkan tampilan demonstrasi, liha t halaman 6. For installation and connections, refer to the separate manual. Untuk instalasi dan penyambungan, lihat buku pedoman terpisah.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
ENGLISH 3 How to use the M MODE button If you press M MODE, the unit goes into functions mode, then the number buttons and 5 / ∞ buttons work as different function buttons.
4 ENGLISH Parts identification Display window Control panel 1 SRC (source) button 2 B BAND button 3 (standby/on attenuator) button / Control dial 4 SEL (select) button 5 Display window 6 5 (up) / ∞ .
ENGLISH 5 Remote controller — RM-RK50 Installing the lithium coin battery (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode.
6 ENGLISH To drop the volume in a moment (ATT) To restore the sound, press the button again. To turn off the power Basic settings • See also “General settings — PSM” on pages 13 and 14. 1 2 1 Canceling the display demonstrations Select “DEMO,” then “DEMO OFF.
ENGLISH 7 Radio operations ~ Ÿ ! Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again. To tune in to a station manually In step ! above... 1 2 Select a desired station frequency. Lights up when receiving an FM stereo broadcast with sufficient signal strength.
8 ENGLISH Manual presetting Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band. 1 2 3 Listening to a preset station 1 2 Select the preset station (1 – 6) you want. or To check other information while listening to the radio * If no name is assigned to a station, “NO NAME” appears.
9 ENGLISH To select a particular track in a folder (for MP3 or WMA disc): Other main functions Skipping tracks quickly during play • For MP3 or WMA discs, you can skip tracks within the same folder. Ex.: To select track 32 while playing tracks whose number is a single digit (1 to 9) 1 2 Each time you press the button, you can skip 10 tracks.
10 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. 7 Repeat play Mode Plays repeatedly TRK RPT : The current track. FLDR RPT * : All tracks of the current folder.
11 ENGLISH Caution: • Avoid using the iPod if it might hinder your safety driving. • Make sure all important data has been backed up to avoid losing the data.
12 ENGLISH Sound adjustments You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer). Indication (For) BAS * 1 MID * 2 TRE * 3 S.
13 ENGLISH You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 2 Select a PSM item. 3 Adjust the PSM item selected. General settings — PSM 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure.
14 ENGLISH Indications Item ( : Initial) Setting, [reference page] SCROLL * 2 Scroll • ONCE • AUTO • OFF : Scrolls the track information once. : Repeats scrolling (at 5-second intervals). : Cancels. • Pressing D DISP for more than one second can scroll the display regardless of the setting.
15 ENGLISH External component operations You can connect an external component to the AUX (auxiliary) input jack on the control panel. ~ Ÿ Turn on the connected component and start playing the source. ! Adjust the volume. ⁄ Adjust the sound as you want.
16 ENGLISH More about this unit Basic operations Turning on the power • By pressing SRC on the unit, you can also turn on the power. If the source is ready, playback also starts.
ENGLISH 17 • This unit cannot play back the following files: – MP3 files encoded with MP3i and MP3 PRO format. – MP3 files encoded in an inappropriate format. – MP3 files encoded with Layer 1/2. – WMA files encoded with lossless, professional, and voice format.
18 ENGLISH Title assignment • If you try to assign titles to more than 30 station frequencies, “NAMEFULL” appears. Delete unwanted titles before assignment. General settings—PSM • “AUTO” setting for “DIMMER” may not work correctly on some vehicles, particularly on those having a control dial for dimming.
ENGLISH 19 Hierarchical structure of file searching when an iPod is connected EN16-23_KD-PDR55[U_UH]f.indd 19 EN16-23_KD-PDR55[U_UH]f.indd 19 11/8/06 3:28:50 PM 11/8/06 3:28:50 PM.
20 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
ENGLISH 21 Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). FM/AM • SSM automatic presetting does not work.
22 ENGLISH Symptoms Remedies/Causes MP3/WMA playback • Tracks do not play back in the order you have intended them to play. Playback order is determined when the files are recorded. • Elapsed playing time is not correct. This sometimes occurs during play.
ENGLISH 23 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
© 2006 Victor Company of Japan, Limited EN, IN 1206DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Ada MASALAH dengan cara pengoperasian? Setel kembali unit Anda Lihat halaman mengenai Bagaimana mereset unit anda Rear_KD-PDR55_004A_f.
1 KD-PDR55 Installation/Connection Manual Manual Pemasangan/Penyambungan GET0426-009A [UN] L Handles Pegangan-pegangan H Washer (ø5) Perapat sambungan (ø5) I Lock nut (M5) Mur kunci (M5) J Mounting .
2 When using the optional stay / Ketika menggunakan penguat tambahan Note : When installing the unit on the mounting bracket, make sure to use the 8 mm-long screws. If longer screws are used, they could damage the unit. Catatan : Ketika memasang alat penerima pada breket bingkai, pastikan untuk menggunakan sekrup-sekrup panjang- 8 mm.
3 A Typical connections / Ciri khas sambungan-sambungan Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color.
4 Connecting the external amplifier or subwoofer / Penyambungan penguat eksternal atau subwoofer B You can connect amplifier to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.
ENGLISH CD RECEIVER KD-PDR55 KD-PDR55 For canceling the display demonstration, see page 6. For installation and connections, refer to the separate manual.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
ENGLISH 3 How to use the M MODE button If you press M MODE, the unit goes into functions mode, then the number buttons and 5 / ∞ buttons work as different function buttons.
4 ENGLISH Parts identification Display window Control panel 1 SRC (source) button 2 B BAND button 3 (standby/on attenuator) button / Control dial 4 SEL (select) button 5 Display window 6 5 (up) / ∞ .
ENGLISH 5 Remote controller — RM-RK50 Installing the lithium coin battery (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode.
6 ENGLISH To drop the volume in a moment (ATT) To restore the sound, press the button again. To turn off the power Basic settings • See also “General settings — PSM” on pages 13 and 14. 1 2 1 Canceling the display demonstrations Select “DEMO,” then “DEMO OFF.
ENGLISH 7 Radio operations ~ Ÿ ! Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again. To tune in to a station manually In step ! above... 1 2 Select a desired station frequency. Lights up when receiving an FM stereo broadcast with sufficient signal strength.
8 ENGLISH Manual presetting Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band. 1 2 3 Listening to a preset station 1 2 Select the preset station (1 – 6) you want. or To check other information while listening to the radio * If no name is assigned to a station, “NO NAME” appears.
9 ENGLISH To select a particular track in a folder (for MP3 or WMA disc): Other main functions Skipping tracks quickly during play • For MP3 or WMA discs, you can skip tracks within the same folder. Ex.: To select track 32 while playing tracks whose number is a single digit (1 to 9) 1 2 Each time you press the button, you can skip 10 tracks.
10 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. 7 Repeat play Mode Plays repeatedly TRK RPT : The current track. FLDR RPT * : All tracks of the current folder.
11 ENGLISH Caution: • Avoid using the iPod if it might hinder your safety driving. • Make sure all important data has been backed up to avoid losing the data.
12 ENGLISH Sound adjustments You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer). Indication (For) BAS * 1 MID * 2 TRE * 3 S.
13 ENGLISH You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 2 Select a PSM item. 3 Adjust the PSM item selected. General settings — PSM 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure.
14 ENGLISH Indications Item ( : Initial) Setting, [reference page] SCROLL * 2 Scroll • ONCE • AUTO • OFF : Scrolls the track information once. : Repeats scrolling (at 5-second intervals). : Cancels. • Pressing D DISP for more than one second can scroll the display regardless of the setting.
15 ENGLISH External component operations You can connect an external component to the AUX (auxiliary) input jack on the control panel. ~ Ÿ Turn on the connected component and start playing the source. ! Adjust the volume. ⁄ Adjust the sound as you want.
16 ENGLISH More about this unit Basic operations Turning on the power • By pressing SRC on the unit, you can also turn on the power. If the source is ready, playback also starts.
ENGLISH 17 • This unit cannot play back the following files: – MP3 files encoded with MP3i and MP3 PRO format. – MP3 files encoded in an inappropriate format. – MP3 files encoded with Layer 1/2. – WMA files encoded with lossless, professional, and voice format.
18 ENGLISH Title assignment • If you try to assign titles to more than 30 station frequencies, “NAMEFULL” appears. Delete unwanted titles before assignment. General settings—PSM • “AUTO” setting for “DIMMER” may not work correctly on some vehicles, particularly on those having a control dial for dimming.
ENGLISH 19 Hierarchical structure of file searching when an iPod is connected EN16-23_KD-PDR55[U_UH]f.indd 19 EN16-23_KD-PDR55[U_UH]f.indd 19 11/8/06 3:28:50 PM 11/8/06 3:28:50 PM.
20 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
ENGLISH 21 Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). FM/AM • SSM automatic presetting does not work.
22 ENGLISH Symptoms Remedies/Causes MP3/WMA playback • Tracks do not play back in the order you have intended them to play. Playback order is determined when the files are recorded. • Elapsed playing time is not correct. This sometimes occurs during play.
ENGLISH 23 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
© 2006 Victor Company of Japan, Limited EN, CT 1206DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_KD-PDR55_005A_f.
1 KD-PDR55 Installation/Connection Manual 安裝/連接手冊 GET0426-010A [UT] L Handles 板條型把手 H Washer (ø5) 墊圈( ø5 ) I Lock nut (M5) 鎖定螺母( M5 ) J Mounting bolt (M5 ×.
2 When using the optional stay / 若選用支撐架 Note : When installing the unit on the mounting bracket, make sure to use the 8 mm -long screws. If longer screws are used, they could damage the unit.
3 A Typical connections / 典型的接線方法 Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color.
4 Connecting the external amplifier or subwoofer / 連接至外部功率放大器或超重低音揚聲器 B You can connect amplifier to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.
デバイスJVC GET0425-001Aの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
JVC GET0425-001Aをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC GET0425-001Aの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC GET0425-001Aの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC GET0425-001Aで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC GET0425-001Aを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC GET0425-001Aの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC GET0425-001Aに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC GET0425-001Aデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。