JVCメーカーGR-AXM4Uの使用説明書/サービス説明書
ページ先へ移動 of 64
G R-A XM4U COMP ACT VHS CAMCORDER INSTRUCTIONS LYT0002-003B Com pa ct VHS For Customer Use: Enter below the Serial Nos. of the GR-AXM4U camcorder and the AA-V1 1U AC Power Adapter/Charger . The serial numbers are located on the bottom of the GR-AXM4U, and the AA-V1 1U.
2 W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. W arning on lithium battery The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not rechar ge, disassemble, heat above 100°C (212°F) or incinerate.
3 5. V entilation Slots and openings in the cabinet are provided for ventilation. T o ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. • Do not block the openings by placing the product on a bed, sofa, rug or other similar surface.
4 USE 1. Accessories T o avoid personal injury: • Do not place this product on an unstable cart, stand, tripod, bracket or table. It may fall, causing serious injury to a child or adult, and serious damage to the product. • Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product.
5 SUPPL Y POWER Using the battery pack 1 Hook-on the battery pack's top end to the camcorder . (Charging procedure, Z pg. 8) 2 Push in the battery pack until it locks into place. T o remove the battery pack Slide BA TT . RELEASE and pull out the battery pack.
6 MAJOR FEA TURES REMEMBER Multi Function Control ( Z pg. 22 – 36) PROVIDED ACCESSORIES Cassettes marked can be used with this camcorder . • AC Power Adapter/ Charger AA-V1 1U • Battery Pack BN-.
7 CONTENTS GETTING ST ARTED 8 Power ................................................................................................ 8 Clock (Lithium) Battery Removal/Insertion ................................................... 10 Viewfinder Adjustment .
8 GETTING ST ARTED ** REFRESH The AC power adapter features a REFRESH function that allows you to fully discharge the battery pack before recharging. T o discharge the battery . . . .... attach the battery pack to the adapter as shown in the illustration to the left.
9 ** CHARGE MARKER (OPTIONAL BA TTER Y ONL Y) A charge marker is provided on the battery pack to help you remember whether it has been charged or not. T wo colors are provided (red and black)—you choose which one means char ged and which means dischar ged.
10 GETTING ST ARTED (cont.) Clock (Lithium) Battery Removal/Insertion This battery is necessary for clock operation and to perform date/time settings. SWITCH OFF POWER 1 Switch off the unit’ s power and remove the power supply unit. OPEN COVER 2 Open the clock battery compartment cover while pressing the release tab.
11 Tele Macro OFF Gain Up AGC Color Filter NOR. Tape Length T30 Title Sub Menu Set Cancel JAN 1.00 AM 12:00 Date/Time Date/T ime Setting SELECT MODE 1 Set the Power switch to “CAMERA”, and the Shooting Mode selector to “PRESET”.
12 Tele Macro OFF Gain Up AGC Color Filter NOR. Title Sub Menu Date/Time Tape Length T40 T20 T30 T40 GETTING ST ARTED (cont.) T ape Length Setting SELECT MODE 1 Set the Power switch to “CAMERA”, and the Shooting Mode selector to “PRESET”.
13 1 1 5 2 2 3 3 4 4 Recording Mode Setting 1 Pressing SP/EP alternates the setting between SP (standard play-provides higher picture and sound quality , better for dubbing) and EP (Extended Play- more economical, recording at 1/3 the speed of SP).
14 GETTING ST ARTED (cont.) Grip Adjustment EXP AND LOOP 1 Separate the V elcro strip. INSER T HAND 2 Pass your right hand through the loop and grasp the grip. ADJUST STRAP LENGTH 3 Adjust so your thumb and fingers can easily operate the Recording Start/Stop button and Power Zoom switch.
15 10 ° 5m(16.4ft) 10 ° 30 ° 30 ° Using The RM-V705U Remote Control Unit The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (PLA Y , STOP , P AUSE, FF , and REW) of your VCR. This remote control unit makes additional recording functions possible.
16 120min 119min 3min 2min (Blinking) 1min (Blinking) 0min (Blinking) * min.....(Now calculating) RECORDING Basic Recording NOTE: Y ou should already have performed the procedures listed below . If not, do so before continuing. ● Power ( Z pg. 8) ● T ape Length Setting ( Z pg.
17 120min 119min 3min 2min (Blinking) 1min (Blinking) 0min (Blinking) * min.....(Now calculating) Shooting while watching the viewfinder Before the following steps, perform step 1 ( Z pg. 16). ENTER RECORD–ST ANDBY MODE 2 Make sure the LCD monitor is closed and locked.
18 RECORDING Basic Recording (cont.) High-angle shooting If you tilt the LCD monitor downward, you can shoot from a high angle. OPEN LCD MONITOR 1 Make sure the LCD monitor is fully open. TIL T LCD MONITOR DOWNW ARD 2 • The LCD monitor can be tilted downward up to 45 degrees.
19 W T W T W T W T W T Zoom-in Zoom-out RECORDING Basic Features FEA TURE: Zooming PURPOSE: T o produce the zoom in/out effect, or an instantaneous change in image magnification. OPERA TION: 28X Hyper zoom Digital circuitry doubles the maximum 14x magnification offered by optical zoom.
20 RECORDING Basic Features (cont.) FEA TURE: Index Code Marking PURPOSE: T o give you automatic access to any selected point on a recording. Auto Marking and Manual Marking are available. OPERA TION: Auto Marking An index code is marked to start the first recording after a cassette is inserted, as long as the Power switch is set to “CAMERA”.
21 Date/T ime Inser t This feature allows you to display the date and time in your viewfinder or the LCD monitor and on a connected TV . NOTE: Y ou should already have performed the Date/T ime Setting procedure ( Z pg. 1 1). If you haven’t, do so before continuing.
22 RECORDING Advanced Features (cont.) + 02 + 06 – 06 Digital Image Stabilizer This feature compensates for unstable images caused by camera-shake, particularly noticeable at high magnifica- tion. ACTIV A TE D. I. ST ABILIZER 1 Press D.I.ST ABILIZER .
23 MWB No indication (Auto) MWB White Balance Adjustment This camcorder’s Automatic Color T emperature system senses the color temperature of the ambient lighting for automatic white balance adjustment.
24 RECORDING Advanced Features (cont.) Focusing Auto Focus The camcorder’s Full Range AF system offers continuous shooting ability from close-up to infinity . However , correct focus may not be obtainable in the situations listed below (in these cases use manual focusing): • When two subjects overlap in the same scene.
25 Manual Focus NOTE: T o adjust focus while watching the viewfinder , you should already have made the necessary viewfinder adjustments ( Z pg. 10). If you haven’t, do so before continuing. SELECT SHOOTING MODE 1 Set the Shooting Mode selector to “PRESET”.
26 1 Cinema 2 Sepia 3 Twilight 4 Sports 5 HI.S 1/2000 OFF RECORDING Advanced Features (cont.) Program AE With Special Effects Useful in making the picture look creative and attractive. Effects can be selected during recording, as well as in Record–Standby .
27 NOTES: ● When the Sepia effect is activated, pressing MWB (manual white balance) has no effect. ● Certain effects cannot be used together with other functions. When an effect not usable in the present situation is selected, its indicator blinks.
28 B K 1 Black Fader 2 Blue Fader 3 Mosaic Fader 4 Shutter Wipe 5 Slide Wipe OFF B K C RECORDING Advanced Features (cont.) Fade/Wipe These effects let you make pro-style scene transitions. SELECT SHOOTING MODE 1 Set the Shooting Mode selector to either “FULL AUT O” or “PRESET”.
29 B K BLACK F ADER Fades in/out to a black screen. C BLUE F ADER Fades in/out to a blue screen. MOSAIC F ADER Gradually turns/returns the picture into/from a mosaic pattern. SHUTTER WIPE A black screen moves in from the top and bottom, closing over the image like a shutter , or a new image pushes open the black screen vertically from the center.
30 Tele Macro OFF Gain Up AGC Color Filter NOR. Tape Length T30 Title Date/Time Sub Menu Interval Timer OFF Rec Time OFF JLIP ID NO. 07 Tally ON PAUSE l RECORDING Advanced Features (cont.
31 MAIN MENU T ele Macro OFF Usually set to this position. l ON Usually the distance to a subject where the lens is in focus depends on the zoom magnification. Unless there is a distance more than 1m to the subject, the lens is out of focus at the maximum telephoto setting.
32 Happy Birthday Our Vacation Merry Christmas A Special Day Happy Holidays Our New Baby Wedding Day Congratulations (Set Character) OFF Congratulations Tele Macro OFF Gain Up AGC Color Filter NOR. Tape Length T30 Date/Time Sub Menu Title RECORDING Advanced Features (cont.
33 Happy Birthday Our Vacation Merry Christmas A Special Day Happy Holidays Our New Baby Wedding Day Congratulations (Set Character) OFF J K L M N O P Q R S T U V W X Y Z Ä Ö Ü À È Ì Ò Ù Ñ Æ Ø Å & : .
34 RECORDING Advanced Features (cont.) JLIP ID NO. 07 Tally ON Interval Timer OFF Rec Time OFF Tele Macro OFF Gain Up AGC Color Filter NOR. Tape Length T30 Date/Time Sub Menu Title 1 min Self-Timer Y ou can set the delay between pressing RECORDING ST ART/STOP and the actual start of recording.
35 JLIP ID NO. 07 Tally ON Interval Timer OFF Rec Time OFF Tele Macro OFF Gain Up AGC Color Filter NOR. Tape Length T30 Date/Time Sub Menu Title 1s Animation Give stationary scenes or objects an illusion of movement.
36 RECORDING Advanced Features (cont.) T ime-Lapse Y ou can record sequentially at preset time spans. Leaving the camcorder aimed at a specific subject, you can record subtle changes over an extended period of time. ENGAGE RECORD–ST ANDBY MODE 1 Make sure the lens cover is open, then set the power switch to “CAMERA”.
37 SPEAKER VOLUME MIN MAX BRIGHT – + PLA YBACK Basic Playback LOAD A CASSETTE 1 First press PUSH/OPEN and open the LCD monitor to an angle of over 60 degrees. Press EJECT to open the cassette holder , then insert the cassette with the label facing out.
38 M–1:23:45 FEA TURE: Manual T racking PURPOSE: T o eliminate noise bars that appear on the screen. OPERA TION: 1) Press either TRACKING button as many times as necessary for best picture. NOTES: ● T o reset TRACKING to the original preset, press both TRACKING buttons simultaneously .
39 A B There are three basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals. Connection T o A VCR [A] (Editing, Dubbing and Playback) NOTE: Use the optional Audio and V ideo cables.
40 + PLA YBACK Using The Cassette Adapter Cassette Adapter (VHS PlayPak) Use this to play back a VHS-C video cassette recorded with this camcorder . It is fully compatible with any VHS video cassette recorder . The C-P7U adapter is battery powered and automatically performs tape loading and unloading.
41 EDITING T ape Dubbing CONNECT EQUIPMENT 1 Following the illustration at left, connect the camcorder and the VCR. PREP ARE FOR DUBBING 2 Set the camcorder ’ s Power switch to “PLA Y”, turn on the VCR’ s power , and insert the appropriate cassettes in the camcorder and the VCR.
42 SET REMOTE/VCR CODE SET REMOTE TO OPERA TE VCR 1 T urn off the power to the VCR and point the remote toward the VCR’ s infrared sensor . Then, referring to the chart on the left, press and hold MBR SET , and press button (A) and then (B). • The code is automatically set once you release the MBR SET button, and the VCR’ s power comes on.
43 A B C IN OUT ç 1 0:00:25 - - : - - : - - 2 3 4 5 6 7 8 COUNTER 0:00:25 TOTAL 0:00:00 IN OUT ç 1 0:00:25 0:01:05 2 0:03:18 0:03:31 3 0:02:33 0:02:53 4 0:04:11 - - : - - : - - 5 6 7 8 COUNTER 0:04:11 TOTAL 0:01:13 IN/OUT PLA Y/P AUSE R.
44 EDITING (cont.) 1 3 2 IN OUT IN OUT IN OUT ORIGINAL T APE (camcorder) EDITED TAPE (VCR) AUTOMA TIC EDITING TO VCR ENGAGE VCR’S RECORD–P AUSE MODE 1 Point the remote control toward the VCR’ s infrared sensor and press VCR REC STBY , or manually engage the VCR’ s Record-Pause mode.
45 w M–0:12:34 COUNTER R/M Insert Editing Y ou can record a new scene into a previously recorded tape, replacing a section of the original recording with minimal picture distortion at the in- and out-points. The original audio remains unchanged. NOTE: Use the RM-V705U remote control unit to perform this procedure.
46 EDITING (cont.) M-0:05:20 e Audio Dubbing Y ou can record a new soundtrack on a prerecorded tape (normal audio only). ** Perform steps 1 , 2 and 3 of the Insert Editing procedure ( Z pg. 45) before continuing. • The sound comes from the built-in mike.
47 USER MAINTENANCE After Use 1 Set the power switch to POWER OFF to turn off the camcorder . 2 Press EJECT to open the cassette holder , then remove the cassette. 3 Close and lock the cassette holder by pressing PUSH. 4 Close and lock the LCD monitor .
48 TROUBLESHOOTING SYMPTOM POSSIBLE CAUSE(S) POWER No power is supplied. The power suddenly goes off and doesn’t come back on by itself. ● The battery pack has not been attached correctly ( Z pg. 8). ● The battery pack is not charged ( Z pg. 8).
49 SYMPTOM POSSIBLE CAUSE(S) OTHER The tape won’t eject. Some functions are not available. V ertical white lines appear when shooting a very bright object. Bright, crystal-shaped spots appear in the LCD monitor and the viewfinder. The rear of the LCD monitor is hot.
50 INDEX Controls %^ & * ( qw e r t ) yu $ io 4 1 8 7 3 2 6 5 9 0 !# Q WERT p g hj U Y f d I O Pa s @.
51 Controls 1 PUSH/OPEN Button ........................... Z pg. 5 2 Shooting Mode Selector ..................... Z pg. 1 1 3 Multi-Function Control [FAR/NEAR/+/– Buttons] ..................... Z pg. 1 1 4 PROG.AE/EFFECT Button ................... Z pg.
52 112m i n EP REC 1 min TAPE END Congratulations PAUSE 1/4s T40 INDEX MWB DEC 25 . 96 l P M 4:2 8:3 4 + 02 W T 12 3 4 5 67 8 9 0 ! @ # $ % &^ * ( ) q w e r INDEX LCD monitor/Viewfinder # Clock Warning Once the power is turned on and the indicator blinks for about 10 seconds, perform the date and time settings ( Z pg.
53 INDEX Te r m s A AC Power Adapter .................................. pg. 9 Animation Recording .............................. pg. 35 Audio Dubbing ....................................... pg. 46 Auto Focus ...........................................
54 General Battery Pr ecautions • When the C-P6U or C-P7U (cassette adapter) is not functioning even when correctly operated, the batteries are exhausted. Replace them with fresh ones. • Use only the following battery: C-P6U or C-P7U .............
55 Batter y Packs The supplied battery pack is a nickel-cadmium battery . Before using the supplied battery pack or an optional battery pack, be sure to read the following cautions: 1. T o avoid hazard . . . .... do not burn. .... do not short-cir cuit the terminals.
56 Main Unit 1. For safety , DO NOT . . . .... open the camcorder’s chassis. .... disassemble or modify the unit. .... short-cir cuit the terminals of the battery pack. Keep it away from metallic objects when not in use. .... allow inflammables, water or metallic objects to enter the unit.
57 SPECIFICA TIONS GENERAL Format : VHS NTSC standard Power sour ce : DC 6V Power consumption LCD monitor off, viewfinder on : 5.7 W LCD monitor on, viewfinder off : 7.
58 ESP AÑOL Alimentación Esta cámara de video posee un sistema de alimentación de 3 vías que le permite seleccionar la fuente de alimentación más apropiada. NOT AS: ● Sin alimentación no hay ninguna función disponible. ● Utilice exclusivamente la alimentación indicada.
59 INSERCION DEL CASSETTE DE VIDEO 1 Presione PUSH/OPEN para abrir el monitor LCD. • Abra a un ángulo mayor de 60 grados. 2 Presione EJECT para abrir el portacassette. 3 Inserte un cassette de video. 4 Presione PUSH para cerrar el portacassette. (Por más detalles, Z P .
60 FOR SER VICING HOW TO LOCATE YOUR JVC SERVICE CENTER Dear customer: In order to receive the most satisfaction from your purchase, read the instruction booklet before operating the unit.
61 W ARRANTY LIMITED WARRANTY CONSUMER VIDEO 1-90 JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period as shown below.
MEMO.
MEMO.
G R-AXM4U COPYRIGHT© 1996 VICTOR COMPANY OF JAPAN, LTD. JV C COMP ANY OF AMERIC A DIVISION OF US JVC CORP . 41 Slater Drive, Elmwood Park, N . J .
デバイスJVC GR-AXM4Uの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
JVC GR-AXM4Uをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC GR-AXM4Uの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC GR-AXM4Uの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC GR-AXM4Uで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC GR-AXM4Uを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC GR-AXM4Uの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC GR-AXM4Uに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC GR-AXM4Uデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
