JVCメーカーGR-AXM510の使用説明書/サービス説明書
ページ先へ移動 of 60
COMP ACT VHS CAMCORDER LYT0260-001E INSTRUCTIONS ENGLISH EN G R-A XM 5 1 0 For Customer Use: Enter below the Model No. and Serial No. which is located on the bottom of cabinet.
2 EN Dear Customer , Thank you for purchasing the JVC Compact VHS camcorder . Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product. Using This Instruction Manual • All major sections and subsections are listed in the T able Of Contents ( Z pg.
EN 3 5. V entilation Slots and openings in the cabinet are provided for ventilation. T o ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. • Do not block the openings by placing the product on a bed, sofa, rug or other similar surface.
4 EN USE 1. Accessories T o avoid personal injury: • Do not place this product on an unstable cart, stand, tripod, bracket or table. It may fall, causing serious injury to a child or adult, and serious damage to the product. • Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product.
EN 5 A B 3 1 2 3 2 1 Using the battery pack Hook its end to the camcorder ( ) and push the battery pack in until it locks in place ( ). (Char ging procedure, Z pg. 8) T o remove the battery pack Slide BA TTERY RELEASE and pull out the battery pack. QUICK OPERA TION GUIDE 1 Set the Power Switch to “PLAY”.
6 EN MAJOR FEA TURES REMEMBER Program AE with Special Effects ( Z pg. 26, 27) n Electronic Fog Filter n ND Ef fect n Sepia n T wilight n Sports n Nega/Posi n 1/2000 sec. High Speed Shutter Cassettes marked can be used with this camcorder . Digital Hyper Zoom ( Z pg.
EN 7 GETTING ST ARTED 8 – 15 Power ............................................................................................................ 8 Clock (Lithium) Battery Insertion/Removal .............................................................
8 EN GETTING ST ARTED A B Power This camcorder’s 3-way power supply system lets you choose the most appropriate sour ce of power . NOTES: ● No function is available without power supply . ● Use only the specified power supply . ● Do not use provided power supply units with other equipment.
EN 9 GETTING ST ARTED Charge Marker A charge marker is provided on the battery pack to help you remember whether it has been char ged or not. T wo colors are provided (red and black)—you choose which one means char ged and which means dischar ged.
10 EN GETTING ST ARTED (cont.) Clock (Lithium) Battery Inser tion/Removal This battery is necessary for clock operation and to perform date/time settings. 1 SWITCH OFF POWER Switch off the unit’ s power and remove the power supply unit (battery pack, AC Power Adapter/Battery Charger , etc.
EN 11 GETTING ST ARTED 4 NEX T M . W . B . D . ZOOM TELE MACRO DA T E T I ME T APE LENGTH 4 RET URN AUTO ON OFF T3 0 4 NEX T M . W . B . D . ZOOM TELE MACRO DA T E T I ME T APE LENGTH 4 RET URN AUTO ON OFF T3 0 YEAR MONTH DA Y TIM E EXIT 1 999 JAN 1 PM 1 2 : 0 0 DA T E T I ME Date/Time Settings 1 ACCESS MENU SCREEN Set the Power Switch to “PRO.
12 EN 4 NEX T M . W . B . D . ZOOM TELE MACRO DA T E T I ME T APE LENGTH 4 RET URN AUTO ON OFF T3 0 4 NEX T M . W . B . D . ZOOM TELE MACRO DA T E T I ME T APE LENGTH 4 RET URN AUTO ON OFF T4 0 T2 0 T3 0 T4 0 EXIT T APE LENGTH SP T30 GETTING ST ARTED (cont.
EN 13 GETTING ST ARTED Loading/Unloading A Cassette 1 OPEN LCD MONITOR Open the LCD monitor to an angle of over 60 degrees. 2 OPEN CASSETTE HOLDER Slide EJECT until the holder opens. Do not use force to open. 3 INSERT/REMOVE CASSETTE Make sure the label is facing outward.
14 EN 1 3 3 2 2 180 ° 180 ° PAUSE GETTING ST ARTED (cont.) Power Zoom Lever Recording Start/Stop B utton Set “POWER” to “CAMERA” (“AUTO” or “PRO.”) Grip Adjustment 1 EXP AND LOOP Separate the V elcro strip. 2 INSERT HAND Pass your right hand through the loop and grasp the grip.
EN 15 GETTING ST ARTED Shoulder Strap Attachment 1 A TT ACH STRAP Following the illustration at left, thread the strap through the top of the eyelet 1 , then fold it back and thread it through the buckle 2 . Repeat the procedure to attach the other end of the strap to the other eyelet 3 , making sure the strap is not twisted.
16 EN RECORDING Basic Recording NOTE: Y ou should already have performed the procedures listed below . If not, do so before continuing. ● Power ( Z pg. 8) ● Recording Mode Setting ( Z pg. 12) ● T ape Length Setting ( Z pg. 12) ● Grip Adjustment ( Z pg.
EN 17 RECORDING 120MIN 119MIN 3MIN 2MIN 1MIN 0MIN MIN 2 5 MIN 4 STOP RECORDING Press the Recording Start/Stop B utton again to stop recording. • The camcorder re-enters the Record-Standby mode.
18 EN RECORDING Basic Recording (cont.) Shooting W hile W atching The LCD M onitor Before the following steps, perform step 1 ( Z pg. 16). 2 ENTER RECORD–ST ANDBY MODE Make sure the LCD monitor is fully open. T urn the LENS COVER Open/Close Ring to open the lens cover , then set the Power Switch to “CAMERA” (“AUT O” or “PRO.
EN 19 RECORDING Journalistic Shooting In some situations different angles of shooting may be required for more dramatic results. 1 OPEN LCD MONITOR Make sure the LCD monitor is fully open. 2 TIL T LCD MONITOR T ilt the LCD monitor in the most convenient direction.
20 EN 1X RECORDING Basic Features Zoom in Zoom out Power Zoom Lever Zoom indicator bar FEA TURE: Zooming PURPOSE: T o produce the zoom in/out effect, or an instantaneous change in image magnification. Digital cir cuitry extends the maximum magnification offered by optical zoom.
EN 21 RECORDING RET AKE (R/F) Button FEATURE: Quick Review PURPOSE: T o check the end of the last recording. OPERA TION: 1) Press “ ” and release quickly during the Record– Standby mode. n T ape is rewound for about 2 seconds and played back automatically , then pauses in Record–Standby mode for the next shot.
22 EN RECORDING Basic Features (cont.) P . ST ABILIZER Button Power Switch FEA TURE: Picture Stabilizer PURPOSE: T o compensate for unstable images caused by camera- shake, particularly at high magnification. OPERA TION: 1) Press P . ST ABILIZER . “ ”appears.
EN 23 RECORDING DANGER n The video light can become extremely hot. Do not touch it either while in operation or soon after turning it off, otherwise serious injury may result. n Do not place the camcorder into the carrying case immediately after using the video light, since it remains extremely hot for some time.
24 EN RECORDING Advanced Features Snapshot Use your camcorder like a regular camera and take a snapshot, or several of them in succession. 1 SELECT OPERA TION MODE Set the Power Switch to “AUT O” or “PRO.”. 2 T AKE SNAPSHOT Press SNAPSHOT . If you press during Record-Standby .
EN 25 RECORDING EFFECT MOSA IC MOSA IC EFFECT FADER MOSAIC SHUTTER SLIDE OFF (No indication) OFF Fade/Wipe These effects let you make pro-style scene transitions. Fade- or wipe-in works at recording start, and fade- or wipe-out works at recording end or when you enter Record–Standby mode.
26 EN SEPIA SPORTS ND EFFECT TWILIGHT S 1/2000 NEGA /POSI FOG P. AE : S EPIA : S EPIA P. AE ND : FG : OFF ND FG OFF (No indication) RECORDING Advanced Features (cont.) Program AE With Special Effects All you have to do to access any of the variety of shooting effects is press P .
EN 27 RECORDING Display Mode Sepia SEPIA Sepia The scene being shot is recorded in sepia-tinted (reddish-brown) monochrome, giving the effect of an older movie. Use together with Wide ( Z pg. 31) for the authentic look of a classic Hollywood movie. Sports SPORTS Sports High shutter speed clearly captures fast-moving action.
28 EN FOCUS EXPOSURE WID E S . L X TITL E DA T E T I ME DI SP. 4 RET URN AUTO AUTO OFF OFF FOCUS EXPOSURE WID E S . L X TITL E DA T E T I ME DI SP. 4 RET URN AUTO AUTO OFF OFF AUTO DATE DATE TIM E DATE&T I ME OFF EXIT DA T E T I ME DI SP. DEC 2 5 .
EN 29 RECORDING FOCUS EXPOSURE WID E S . L X TITL E DA T E T I ME DI SP. 4 RET URN AUTO AUTO OFF OFF CONGRATULATIONS TI TLE OFF HAPPY BIRTHDAY OUR VACATION MERRY CHRISTMAS A SPECIAL DAY HAPPY HOLIDAYS OUR NEW BABY WEDDING DAY CONGRATULATIONS EXIT FOCUS EXPOSURE WID E S .
30 EN 4 NEX T M . W . B . D . ZOOM TELE MACRO DA T E T I ME T APE LENGTH 4 RET URN AUTO ON OFF T3 0 4 BACK REC . T I ME I NT . T I ME T ALL Y L AMP T I T LE L ANG . JL IP I D NO DEMO MODE 4 RET URN OFF OFF ON E NG LIS H 06 OFF E NG LIS H FRENCH S P A NISH PORTUGUESE EXIT TI TLE LANG.
EN 31 RECORDING Menu Screen Available Using The Select Dial FOCUS EXPOSURE WIDE S.LX TITLE DA TE/TIME DISP . CONTINUED ON NEXT P AGE : Factory-preset Menu Screen Available Using The MENU Button This Menu Screen cannot be accessed while recording. M.W .
32 EN Allows you to set the current date and time ( Z pg. 1 1). Allows you to set the tape length depending on the tape used ( Z pg. 12). This feature allows you to set the parameters for Animation and T ime-Lapse recording ( Z pg. 39). This feature allows you to set the parameters for Self-T imer ( Z pg.
EN 33 RECORDING FOCUS EXPOSURE WID E S . L X TITL E DA T E T I ME DI SP. 4 RET URN AUTO AUTO OFF OFF AU TO M ANU EXIT E XPOSURE – 06 – 06 + 06 00 Exposure Control This feature automatically adjusts the iris for the best available picture quality , but you can override and make the adjustment manually .
34 EN RECORDING Advanced Features (cont.) Focusing AUTO FOCUS The camcorder’s Full Range AF system offers continuous shooting ability from close-up to infinity . However, correct focus may not be obtainable in the situations listed below (in these cases use manual focusing): • When two subjects overlap in the same scene.
EN 35 RECORDING FOCUS EXPOSURE WID E S . L X TITL E DA T E T I ME DI SP. 4 RET URN AUTO AUTO OFF OFF AU TO M ANU EXIT FOCUS MANUAL FOCUS NOTE: Y ou should already have made the necessary viewfinder adjustments ( Z pg. 15). If you haven’t, do so before continuing.
36 EN 4 NEX T M . W . B . D . ZOOM TELE MACRO DA T E T I ME T APE LENGTH 4 RET URN AUTO ON OFF T3 0 AU TO : FIN E : CLOUD : HALOGEN MWB EXIT M.W.B. White Balance Adjustment A term that refers to the correctness of color reproduction under various lighting.
EN 37 RECORDING 4 NEX T M . W . B . D . ZOOM TELE MACRO DA T E T I ME T APE LENGTH 4 RET URN AUTO ON OFF T3 0 AU TO : FIN E : CLOUD : HALOGEN MWB EXIT M.W.B. Manual White Balance Operation If the camera is operating in PRO. mode, perform a Manual White Balance when shooting under various types of lighting.
38 EN 4 BACK REC . T I ME I NT . T I ME T ALL Y L AMP T I T LE L ANG . JL IP I D NO DEMO MODE 4 RET URN OFF OFF ON PORTUGUESE 06 OFF OFF 15S 30S 1 MIN 5 MIN EXIT I NT. T IME OFF 1 4S 1 2S 1 S 5 S EXIT REC T IME 15S 1S 4 NEX T M . W . B . D . ZOOM TELE MACRO DA T E T I ME T APE LENGTH 4 RET URN AUTO ON OFF T3 0 INT .
EN 39 RECORDING Animation Y ou can give stationary scenes or objects an illusion of movement. This function allows you to shoot a series of pictures, each slightly different, of the same object for a brief period of time. NOTE: Before performing the following steps, make sure that: ● The Power Switch is set to “PRO.
40 EN S ET AT VO LUN E T APE END M 1 : 23 : 45 SP PLA YBACK Basic Playback LCD Monitor in Retracted Position 1 LOAD A CASSETTE First open the LCD monitor to an angle of over 60 degrees. Slide EJECT to open the cassette holder , then insert the cassette with the label facing out.
EN 41 PLA YBACK BRIGHT BRIGHT VOLUME Power Zoom Lever Speaker Adjust the brightness of the LCD monitor T o brighten the image, turn the BRIGHT Dial towards “ + ”.
42 EN PLA YBACK Features (cont.) FEA TURE: Still Playback PURPOSE: T o pause during playback. OPERA TION: 1) Press PLA Y/PAUSE ( 4 / 6 ) during playback. 2) T o resume normal playback, press PLA Y/PAUSE ( 4 / 6 ) again. NOTE: Noise bars appear and pictures may become monochrome during Still Playback.
EN 43 PLA YBACK Cassette Adapter (VHS Playpak) Use this to play back an VHS-C video cassette recorded with this camcorder on a VHS VCR. It is fully compatible with any VHS video cassette recorder . The C-P7U adapter is battery powered and automatically performs tape loading and unloading.
44 EN PLA YBACK Basic Connections And T ape Dubbing These are some basic types of connections. When making connections, refer also to your VCR and TV instruction manuals. A. Connection to a TV or VCR equipped with an S-VIDEO Use optional V ideo and Audio cables.
EN 45 PLA YBACK Basic Connections 1 CONFIRM POWER-OFF ST A TUS Make sure the camcorder ’ s power is off. 2 CONNECT CAMCORDER TO TV OR VCR Pull out the connector cover and open it. Connect as shown in the illustration ( Z pg. 44). If using a VCR . . .
46 EN USER MAINTENANCE After Use 1 Set the Power Switch to “POWER OFF” to turn off the camcorder . 2 Open the LCD monitor to an angle of over 60 degrees. Slide EJECT to open the cassette holder, then remove the cassette. 3 Close and lock the cassette holder by pressing PUSH .
EN 47 TROUBLESHOOTING If, after following the steps in the chart below , the problem still exists, please consult your JVC dealer . The camcorder is a microcomputer -controlled device. External noise and interference (from a TV , a radio, etc.) might prevent it from functioning properly .
48 EN TROUBLESHOOTING (cont.) SYMPTOM POSSIBLE CAUSE(S) OTHER During recording, the indications do not appear . The tape will not eject. Some functions are not available. V ertical white lines appear when shooting a very bright object. Bright, crystal-shaped spots appear in the LCD monitor and the viewfinder .
EN 49 INDEX Indications 1 Cassette W arning/ T ape Remaining Time .......................... Z pg. 17 When no cassette is inserted: the cassette ( ) warning blinks. When the Erase Protection tab is not in the position that allows recording: the cassette ( ) warning lights.
50 EN INDEX Controls, Connectors And Indicators U I 1 i o q u t e w 2 p Q W 3 4 5 6 & ( * y E R Y T r 7 8 0 @ $ % 9 ! # ^ ).
EN 51 Controls 1 Diopter Adjustment Control ................. Z pg. 14 2 Lens Cover Open/Close Ring ................ Z pg. 16 3 V ideo Light Switch [LIGHT OFF/AUT O/ON] ...................... Z pg. 23 4 Snapshot Button [SNAPSHOT] ............. Z pg. 24 5 • Power Zoom Lever [T/W] .
52 EN INDEX Te r m s A AC Power Adapter/Charger ..................... Z pg. 8, 9 Animation Recording ................................ Z pg. 39 Auto Date Record ..................................... Z pg. 28 Auto Focus .................................
EN 53 General Battery Pr ecautions • When the C-P6U or C-P7U (cassette adapter) is not functioning even when correctly operated, the battery is exhausted. Replace it with a fresh one. • Use only the following battery: C-P6U or C-P7U ..............
54 EN Cassettes T o properly use and store your cassettes, be sure to read the following cautions: 1. During use . . . .... make sure the cassette bears the VHS-C mark. .... be aware that recording onto prerecorded tapes automatically erases the previously recorded video and audio signals.
EN 55 SPECIFICA TIONS Camcorder General Format : VHS NTSC standard Power source : DC 6.0 V Power consumption LCD monitor off, viewfinder on : 5.9 W LCD monitor on, viewfinder off : 6.
56 EN A B ESP AÑOL Alimentación Esta cámara de video posee un sistema de alimentación de 3 vías que le permite seleccionar la fuente de alimentación más apropiada. NOT AS: ● Sin alimentación no hay ninguna función disponible. ● Utilice exclusivamente la alimentación indicada.
EN 57 GUIA P ARA OPERACION RAPIDA Si la unidad comienza a funcionar mal, deje de usarla inmediatamente y consulte a su concesionario local de JVC. A B 3 1 2 3 2 1 Utilización de la batería Enganche el lado extremo de la batería en la cámara de video ( ) y empuje la batería hasta que se bloquee en el lugar ( ).
58 EN FOR SER VICING (Only in U.S.A.) HOW TO LOCATE YOUR JVC SERVICE CENTER Dear customer: In order to receive the most satisfaction from your purchase, read the instruction booklet before operating the unit.
EN 59 W ARRANTY (Only in U.S.A.) LIMITED WARRANTY CONSUMER VIDEO 1-90 JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period as shown below.
G R-AXM 5 10 COPYRIGHT© 1998 VICTOR COMPANY OF JAPAN, LTD. U Printed in Japan 1198MKV * UN * YP VICTOR COMP ANY OF JAPAN, LIMITED EN.
デバイスJVC GR-AXM510の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
JVC GR-AXM510をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC GR-AXM510の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC GR-AXM510の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC GR-AXM510で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC GR-AXM510を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC GR-AXM510の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC GR-AXM510に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC GR-AXM510デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
