JVCメーカーGR-D22の使用説明書/サービス説明書
ページ先へ移動 of 40
Please visit our Homepage on the World Wide W eb for Digital Video Camera: http://www .jvc-victor .co.jp/english/cyber/ For Accessories: http://www .jvc-victor .co.jp/english/accessory/ For Customer Use: Enter below the Model No. and Serial No. which is located on the bottom of the camcorder .
EN 2 CONTENTS None ADV ANCED FEA TURES FOR RECORDING ....................................... 16 – 20 Night-Alive ........................................................... 16 Program AE With Special Effects ................................ 16 Fade/Wipe Effects .
EN 3 NOTES: ● The rating plate (serial number plate) and safety caution are on the bottom and/or the back of the main unit. ● The rating information and safety caution of the AC Adapter are on its upper and lower sides. W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APP ARA TUS T O RAIN OR MOISTURE.
EN 4 (10) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer , or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over . (11) Unplug this apparatus during lightning storms or when unused for long periods of time.
EN 5 NOTE: In order to maintain optimum performance of the camcorder , provided cables may be equipped with one or more core filter . If a cable has only one core filter , the end that is closest to the filter should be connected to the camcorder . Audio/Video Cable (ø3.
EN 6 Automatic Demonstration takes place when “ DEMO MODE ” is set to “ ON ” (factory-preset). 䡲 Automatic Demonstration starts when there is no operation for about 3 minutes after the Power Switch r is set to “ ” or “ ” and no cassette is in the camcorder .
EN 7 r w ! i Battery pack BN-V408U BN-V416U (optional) BN-V428U (optional) Charging time approx. 1 hr . 30 min. approx. 3 hrs. approx. 5 hrs. Power CHARGING THE BA TTER Y P ACK 1 With the arrow on the.
EN 8 Grip Adjustment 1 Separate the V elcro strip. 2 Pass your right hand through the loop and grasp the grip. 3 Adjust your thumb and fingers through the grip, to easily operate the Recording Start/Stop button ) and Power Switch r and Power Zoom Lever % .
EN 9 o Shoulder Strap Attachment 1 Thread the strap through the eyelet q , then fold it back and thread it through the buckle. Repeat the procedure to attach the other end of the strap to the other eyelet q located under the Grip Strap. Confirm the strap is not twisted.
EN 10 ● It takes a few seconds for the cassette holder to open. Do not apply force. ● There may be a delay after you open the cassette holder cover until the cassette holder opens. Do not use force. ● If you wait a few seconds and the cassette holder does not open, close the cassette holder cover and try again.
EN 11 OFF ( CHARGE ) PLA Y ) # e r w t 180 ° 90 ° 2 0 5 m h 1h30m 1h29m 0h 0 3m 1 h 30 m 0h 0 2m (Blinking) 0h 0 1m (Blinking) 0h 0 0m (Blinking) ( ) Now calculating During shooting Basic Recording Perform the procedures listed below before continuing.
EN 12 T APE RECORDING Power Switch Position : Allows you to set various recording functions using the Menus. If you want more creative capabilities than Full Auto recording, try this mode. (Full Auto): Allows you to record using NO special effects or manual adjustments.
EN 13 T APE RECORDING Time Code During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback. If recording starts from a blank portion, the time code begins counting from “ 00:00:00 ” (minute:second:frame).
EN 14 T APE PLA YBACK Blank Search Helps you find where you should start recording in the middle of a tape to avoid time code interruption ( 墌 pg. 13). 1 Load a tape ( 墌 pg. 9). 2 Set the Power Switch r to “ PLA Y ” while pressing down the Lock Button e located on the switch.
EN 15 To S-VIDEO * To AV & Audio/Video cable (provided) White to AUDIO L IN** Red to AUDIO R IN ** T o S-VIDEO IN S-Video cable (optional) Connector cover* Y ellow to VIDEO IN*** * When connecting the cable, open this cover . ** The Audio cable is not required for watching still images only .
EN 16 Night-Alive Makes dark subjects or areas even brighter than they would be under good natural lighting. Although the recorded image is not grainy , it may look as if it is strobing due to the slow shutter speed. 1 Set the Power Switch r to “ ” while pressing down the Lock Button e located on the switch.
EN 17 Fade/Wipe Effects These effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next. Fade or Wipe works when tape recording is started or when you stop recording. 1 Set the Power Switch r to “ ” while pressing down the Lock Button e located on the switch.
EN 18 FOR RECORDING Snapshot (For T ape Recording) This feature lets you record still images that look like photographs onto a tape. SNAPSHOT MODE SELECTION 1 Set the Power Switch r to “ ” while pressing down the Lock Button e located on the switch.
EN 19 FOR RECORDING Manual Focus T o obtain correct focus. 1 If you are using the viewfinder , you should already have made the necessary viewfinder adjustments ( 墌 pg. 8). 2 Set the Power Switch r to “ ” while pressing down the Lock Button e located on the switch, then press FOCUS ^ ( 墌 pgs.
EN 20 Iris Lock Use this function in the following situations: • When shooting a moving subject. • When the distance to the subject changes (so its size in the LCD monitor or the viewfinder changes), such as when the subject is backing away . • When shooting on a reflective natural background such as at the beach or when skiing.
EN 21 USING MENUS FOR DET AILED ADJUSTMENT For Recording Menu This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings ( 墌 pg. 21 – 24). 1 Set the Power Switch r to “ ” while pressing down the Lock Button e located on the switch.
EN 22 USING MENUS FOR DET AILED ADJUSTMENT SNAP MODE Refer to “ Snapshot (For T ape Recording) ” ( 墌 pg. 18). GAIN UP OFF: Allows you to shoot dark scenes with no picture brightness adjustment. [AGC]: The overall appearance may be grainy , but the image is bright.
EN 23 USING MENUS FOR DET AILED ADJUSTMENT SYSTEM “ SYSTEM ” functions which are set when the Power Switch r is set to “ ” are also applied when the Power Switch r is set to “ PLA Y ” ( 墌 pg. 24). BEEP OFF: Even though not heard while shooting, shutter sound is recorded on the tape.
EN 24 USING MENUS FOR DET AILED ADJUSTMENT TIME CODE [OFF]: T ime code is not displayed. ON: T ime code is displayed on the camcorder and on the connected TV . Frame numbers are not displayed during recording. CLOCK ADJ. Allows you to set the current date and time ( 墌 pg.
EN 25 12 12 : 34 : 24 0 3 0 ’ 5 2 3 : 5 bi t /S O U M P C E D ND 1 8 3 L USING MENUS FOR DET AILED ADJUSTMENT ON SCREEN setting: For playback sound, tape speed and tape running. DA TE/TIME setting: For date/time. Display Minutes Seconds Frames * * 30 frames = 1 second TIME CODE setting: For time code.
EN 26 6 DUBBING Dubbing T o A VCR T o Use This Camcorder As A Player 1 Following the illustration, connect the camcorder and the VCR. Also refer to pg.
EN 27 DUBBING Dubbing T o Or Fr om A Video Unit Equipped With A DV Connector (Digital Dubbing) It is also possible to copy recorded scenes from this camcorder onto another video unit equipped with a DV connector . Since a digital signal is sent, there is little if any image or sound deterioration.
EN 28 SYSTEM CONNECTIONS T o DV 0 DV cable (optional) To D V connector PC with DV connector Core filter Core filter Connection T o A Personal Computer It is possible to transfer video to a PC with a DV connector by using software equipped with the PC or commercially available software.
EN 29 TROUBLESHOOTING The focus does not adjust automatically . • Focus is set to the Manual mode. = Set Focus to the Auto mode ( pg. 19). • The recording was done in a dark place, or the contrast was low . • The lens is dirty or covered with condensation.
EN 30 TROUBLESHOOTING The Black & White Fader does not work. • The Sepia or Monotone mode is activated. = T urn off Sepia and Monotone ( pg. 16). The image looks like the shutter speed is too slow . • When shooting in the dark, the unit becomes highly sensitive to light when “GAIN UP” is set to “AUTO” in the Menu Screen.
EN 31 The charger indicator on the camcorder does not light. • The temperature of the battery is extremely high/low. • Charging is difficult in places subject to extremely high/low temperatures. = T o protect the battery , it is recommended to charge it in places with a temperature of 10°C to 35°C (50°F to 95°F) ( pg.
EN 32 CAUTIONS Battery Packs The supplied battery pack is a lithium-ion battery . Before using the supplied battery pack or an optional battery pack, be sure to read the following cautions: 1. T o avoid hazards . . . ... do not burn. ... do not short-circuit the terminals.
EN 33 CAUTIONS 5. Dirty heads can cause the following problems: • No picture during playback. • Blocks of noise appear during playback. • During recording or playback, the Head Clog Warning indicator “ ” appears. • Recording cannot be performed properly .
EN 34 This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
EN 35 SPECIFICA TIONS Camcorder General Power supply : DC 1 1.0 V (Using AC Adapter) DC 7.2 V (Using battery pack) Power consumption LCD monitor off, viewfinder on : Approx.
EN 36 INDEX Controls, Connectors And Indicators OFF ( CHARGE ) PLA Y 2 3 1 r #$ &* % ^ ) q w e ( t y u i o 456 7 @ ! 0 9 8 Viewfinder Speaker LCD monitor Refer to this diagram while reading the instructions.
EN 37 INDEX 1 Camera Sensor Be careful not to cover this area, a sensor neces- sary for shooting is built-in here. 2 Grip Strap .................................................... pg. 8 3 T ally Lamp ........................................... pg.
EN 38 INDEX W ARNING INDICA TIONS (high) (exhausted) Displays the battery remaining power level. As the battery power comes close to nil, the battery indicator blinks (battery power warning). When the battery power is exhausted, power turns off automatically .
EN 39 A AC Adapter ................................................... pg. 7, 8 Auto Date ....................................................... pg. 23 Auto Focus ..................................................... pg. 18 Auto Shut off .
S Self-Recording ............................................... pg. 12 Sepia .............................................................. pg. 16 Shuttle Search ............................................... pg. 13 Shutter Speed .......
デバイスJVC GR-D22の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
JVC GR-D22をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC GR-D22の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC GR-D22の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC GR-D22で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC GR-D22を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC GR-D22の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC GR-D22に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC GR-D22デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
