JVCメーカーGR-D91の使用説明書/サービス説明書
ページ先へ移動 of 56
Please visit our Homepage on the World Wide Web f or Digital Video Camera: http://www .jvc-victor .co.jp/english/cyber/ For Accessories: http://www .jvc-victor .co.jp/english/accessory/ For Customer Use: Enter below the Model No. and Serial No. which is located on the bottom of the camcorder .
EN 2 CONTENTS None ADV ANCED FEA TURES ............................... 20 – 22 Protecting Files .................................................. 20 Deleting Files ..................................................... 20 Dubbing Still Images Recorded On A T ape T o A Memory Card .
EN 3 NOTES: ● The rating plate (serial number plate) and safety caution are on the bottom and/or the back of the main unit. ● The rating information and safety caution of the AC Adapter are on its upper and lower sides. W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APP ARA TUS TO RAIN OR MOISTURE.
EN 4 (10) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer , or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over . (11) Unplug this apparatus during lightning storms or when unused for long periods of time.
EN 5 NOTE: In order to maintain optimum performance of the camcorder , provided cables may be equipped with one or more core filter . If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder . Audio/Video Cable (ø3.
EN 6 Automatic Demonstration takes place when “ DEMO MODE ” is set to “ ON ” (factory-preset). 䡲 Automatic Demonstration starts when there is no operation for about 3 minutes after the Power Switch u is set to “ ” or “ ” and no cassette is in the camcorder .
EN 7 u t # W Battery pack BN-V408U BN-V416U (optional) BN-V428U (optional) Charging time approx. 1 hr . 30 min. approx. 3 hrs. approx. 5 hrs. Power CHARGING THE BA TTER Y P ACK 1 With the arrow on the.
EN 8 Grip Adjustment 1 Separate the V elcro strip. 2 Pass your right hand through the loop and grasp the grip. 3 Adjust your thumb and fingers through the grip, to easily operate the Recording Start/Stop button e and Power Switch u and Power Zoom Lever & .
EN 9 E Shoulder Strap Attachment 1 Thread the strap through the eyelet r , then fold it back and thread it through the buckle. Repeat the procedure to attach the other end of the strap to the other eyelet r located under the Grip Strap. Confirm the strap is not twisted.
EN 10 ● It takes a few seconds for the cassette holder to open. Do not apply force. ● There may be a delay after you open the cassette holder cover until the cassette holder opens. Do not use force. ● If you wait a few seconds and the cassette holder does not open, close the cassette holder cover and try again.
EN 11 u t % y Loading A Memory Card The provided memory card is already inserted in the camcorder when you receive the camcorder . 1 Make sure the camcorder ’ s power is of f. 2 Press the Monitor Open button i and open the LCD monitor , then open the card cover ( MEMORY CARD ) Q .
EN 12 OFF ( CHARGE ) PLA Y e % y u t 4 180 ° 90 ° i 2 0 5 m h 1h30m 1h29m 0h 0 3m 1 h 30 m 0h 0 2m (Blinking) 0h 0 1m (Blinking) 0h 0 0m (Blinking) ( ) Now calculating During shooting Basic Recording Perform the procedures listed below before continuing.
EN 13 T APE RECORDING Power Switch Position : Allows you to set various recording functions using the Menus. If you want more creative capabilities than Full Auto recording, try this mode. (Full Auto): Allows you to record using NO special effects or manual adjustments.
EN 14 T APE RECORDING Time Code During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback. If recording starts from a blank portion, the time code begins counting from “ 00:00:00 ” (minute:second:frame).
EN 15 6 5 7 8 % & 4 u T APE PLA YBACK Blank Search Helps you find where you should start recording in the middle of a tape to avoid time code interruption ( 墌 pg.
EN 16 To S-VIDEO q To AV ( Audio/Video cable (provided) White to AUDIO L IN ** Red to AUDIO R IN ** T o S-VIDEO IN S-Video cable (optional) Connector cover * Y ellow to VIDEO IN*** * When connecting the cables, open this cover . ** The Audio cable is not required for watching still images only .
EN 17 5 1 1024 ^ u y 4 MEMORY CARD RECORDING Basic Shooting (Snapshot) Y ou can use your camcorder as a digital still camera for taking snapshots. Perform the procedures listed below before continuing. ● Power ( 墌 pg. 7) ● Grip Adjustment ( 墌 pg.
EN 18 Normal Playback 1 Load a memory card ( 墌 pg. 1 1). 2 Set the VIDEO/DSC Switch 4 to “ DSC ” , then set the Power Switch u to “ PLA Y ” while pressing down the Lock Button y . • A stored image is displayed. 3 Press 3 8 to display the next image, or press 2 6 to display the previous image.
EN 19 1 2 3 4 5 6 7 8 9 OFF ( CHARGE ) PLA Y 6 5 7 8 & % 4 ! 0 u y MEMORY CARD PLA YBACK Auto Playback Y ou can run through all the images stored on memory automatically . 1 Perform steps 1 and 2 of “ Normal Playback ” ( 墌 pg. 18). 2 Press 4 / 6 7 .
EN 20 ME NU DIS P L A Y END BR I GH T PR OTEC T D ELETE DPOF NO . RE S E T FO R M AT Protecting Files The Protect mode helps prevent the accidental erasure of files.
EN 21 Dubbing Still Images Recorded On A T ape T o A Memory Card Still images can be dubbed from a tape to a memory card. 1 Load a memory card ( 墌 pg. 1 1) and cassette ( 墌 pg. 9). 2 Set the VIDEO/DSC Switch 4 to “ VIDEO ” , then set the Power Switch u to “ PLA Y ” while pressing down the Lock Button y .
EN 22 Initializing A Memory Card Y ou can initialize a memory card anytime. After initializing, all files and data stored on the memory card, including those which have been protected, are cleared. 1 Perform step 1 of “ Making A New Folder ” . 2 Press the MENU/VOLUME wheel % in.
EN 23 Night-Alive Makes dark subjects or areas even brighter than they would be under good natural lighting. Although the recorded image is not grainy , it may look as if it is strobing due to the slow shutter speed. 1 Set the Power Switch u to “ ” while pressing down the Lock Button y located on the switch.
EN 24 Fade/Wipe Effects These effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next. Fade or Wipe works when tape recording is started or when you stop recording.
EN 25 FOR RECORDING Snapshot (For T ape Recording) This feature lets you record still images that look like photographs onto a tape. SNAPSHOT MODE SELECTION 1 Set the VIDEO/DSC Switch 4 to “ VIDEO ” , then set the Power Switch u to “ ” while pressing down the Lock Button y located on the switch.
EN 26 FOR RECORDING Manual Focus T o obtain correct focus. 1 If you are using the viewfinder , you should already have made the necessary viewfinder adjustments ( 墌 pg. 8). 2 Set the Power Switch u to “ ” while pressing down the Lock Button y located on the switch, then press FOCUS * ( 墌 pgs.
EN 27 Iris Lock Use this function in the following situations: • When shooting a moving subject. • When the distance to the subject changes (so its size in the LCD monitor or the viewfinder changes), such as when the subject is backing away . • When shooting on a reflective natural background such as at the beach or when skiing.
EN 28 USING MENUS FOR DET AILED ADJUSTMENT For Recording Menu This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings ( 墌 pg. 28 – 31). 1 Set the Power Switch u to “ ” while pressing down the Lock Button y located on the switch.
EN 29 USING MENUS FOR DET AILED ADJUSTMENT ON IS D – RE TURN OF F IN D C U T W – OF F ID E M O D E W – OF F ELE M A C R O T – N A MU A L SNAP MODE Refer to “ Snapshot (For T ape Recording) ” ( 墌 pg. 25). GAIN UP OFF: Allows you to shoot dark scenes with no picture brightness adjustment.
EN 30 USING MENUS FOR DET AILED ADJUSTMENT M E LO DY EEP B – RE TURN AM R E S E T C LC D RIO RI T Y P – ON EM O MODE D – ON EM O T E R – ON AL LY T – S Y ST E M RE TURN – – – A R E M A CD IS P L A Y RE N E ON S C LC D / T V U AO T IM E T DAT E / T I ME COD E CLO C K AD J .
EN 31 USING MENUS FOR DET AILED ADJUSTMENT TIME CODE [OFF]: T ime code is not displayed. ON: T ime code is displayed on the camcorder and on the connected TV . Frame numbers are not displayed during recording. CLOCK ADJ. Allows you to set the current date and time ( 墌 pg.
EN 32 12 12 : 34 : 24 0 3 0 ’ 5 2 3 : 5 bi t /S O U M P C E D ND 1 4 6 L USING MENUS FOR DET AILED ADJUSTMENT ON SCREEN setting: For playback sound, tape speed and tape running. DA TE/TIME setting: For date/time. Display Minutes Seconds Frames * * 30 frames = 1 second TIME CODE setting: For time code.
EN 33 7 4 DUBBING Dubbing T o Or From A VCR T o Use This Camcorder As A Player 1 Following the illustration, connect the camcorder and the VCR. Also refer to pg.
EN 34 DUBBING Dubbing T o Or From A Video Unit Equipped With A DV Connector (Digital Dubbing) It is also possible to copy recorded scenes from this camcorder onto another video unit equipped with a DV connector . Since a digital signal is sent, there is little if any image or sound deterioration.
EN 35 USING THE REMOTE CONTROL UNIT Slow-Motion Playback T o allow slow-speed search in either direction during tape playback. 1 T o change from normal to Slow-Motion Playback, press SLOW ( 9 ) P or ( 0 ) O more than approx. 2 seconds. After approx. 5 minutes (approx.
EN 36 34 0 9 2 5 1 8 7 6 I U l USING THE REMOTE CONTROL UNIT VCR (Recording deck) IMPORT ANT Although the MBR is compatible with JVC VCRs and those of many other makers, it may not work with yours or may offer limited functions. NOTES: ● If the VCR ’ s power does not come on in step 1 , try another code from the VCR CODE LIST .
EN 37 f g s U D J h USING THE REMOTE CONTROL UNIT T o Remote P AUSE or R.A.EDIT TV Red to AUDIO R IN To S-VIDEO IN T o P AUSE IN j Editing cable (provided) S-Video cable (optional) Audio/ Video cable (provided) Y ellow to VIDEO IN * * Connect when an S-Video cable is not used.
EN 38 USING THE REMOTE CONTROL UNIT DIAGNOSING VCR/CAMCORDER TIMING 1 Play back the tape in the camcorder , then point the remote control at the camcorder ’ s remote sensor and press R.A.EDIT ON/OFF J . The Random Assemble Editing Menu appears. 2 Perform Random Assemble Editing on Program 1 only .
EN 39 Audio Dubbing The audio track can be customized only when recorded in the 12-bit mode ( 墌 pg. 28). NOTES: ● Audio Dubbing is not possible on a tape recorded in 16-bit audio, on a tape recorded in the LP mode or on a blank portion of a tape. ● T o perform Audio Dubbing while watching on the television, make connections ( 墌 pg.
EN 40 SYSTEM CONNECTIONS “ ACCESSING FILES ” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC. NEVER disconnect the USB cable while “ ACCESSING FILES ” is displayed on the LCD monitor since this can result in product damage.
EN 41 TROUBLESHOOTING The focus does not adjust automaticall y . • Focus is set to the Manual mode. ¥ Set Focus to the A uto mode ( 墌 pg. 26). • The recording was done in a dark place, or the contrast was lo w. • The lens is dir ty or covered with condensation.
EN 42 TROUBLESHOOTING The Black & White Fader does not work. • The Sepia or Monotone mode is activated. ¥ T ur n off Sepia and Monotone ( 墌 pg.
EN 43 The charger indicator on the camcor der does not light. • The temperature of the battery is extremely high/low . • Charging is difficult in places subject to e xtremely high/low temperatures. ¥ T o protect the batter y , it is recommended to charge it in places with a temperature of 10 ° C to 35 ° C (50 ° F to 95 ° F) ( 墌 pg.
EN 44 CAUTIONS General Battery Precautions If the remote control is not functioning even if it is being operated correctly , the batter ies are exhausted. Replace them with fresh ones. Use only the follo wing batteries: AAA (R03) size x 2 Please make note of the following rules for battery use.
EN 45 CAUTIONS 3. DO NOT lea ve the unit . . . ... in places of over 50 ° C (122 ° F). ... in places where humidity is extremely low (belo w 35%) or extremely high (abo ve 80%). ... in direct sunlight. ... in a closed car in summer . ... near a heater.
EN 46 Declaration of Conformity Model Number : GR-D91US T rade Name : JVC Responsible party : JVC AMERICAS CORP . Address : 1700 V alley Road Wa yne, N.
EN 47 SPECIFICA TIONS Camcorder General P ower supply : DC 11.0 V (Using A C Adapter) DC 7.2 V (Using battery pack) P ower consumption LCD monitor off, viewfinder on : Approx.
EN 48 INDEX Controls, Connectors And Indicators OFF ( CHARGE ) PLA Y %^ (q ) & * 2 3 1 4 9 567 8 e r t y Q o $ u i W # @ ! 0 w E p Rj I s g f U P a O d k l ; A S D F G H h K J Y T Viewfinder Speaker LCD monitor Refer to this diagram while reading the instructions.
EN 49 INDEX 1 • Remote Sensor The transmitted beam’ s approximate eff ective distance for indoor use is 5m (16ft). The transmitted beam ma y not be eff ective or may cause incorrect operation outdoors or when the remote sensor is directly exposed to sunlight or powerful lighting.
EN 50 INDEX LCD Monitor/Viewfinder Indications C E R SOUND b i t 2 1 15 : 55 6 w 12 3 4 5 6 09 8 7 1h50m ! 5 1 1024 @# $ % ^ 4 3 3 0 ’ 0 0 0 : 0 1 1 0 xW T JA N M A PHOTO BR I GH T r e t y o i u &am.
EN 51 INDEX 1 Displays the selected F ade/Wipe eff ect .... 墌 pg. 24 2 Appears when in the Squeeze or Cinema mode .................................................................. 墌 pg. 29 3 Rotates while the tape is running .............. 墌 pg.
EN 52 INDEX W ARNING INDICA TIONS (high) (exhausted) Displays the battery remaining power le vel. As the battery power comes close to nil, the battery indicator blinks (battery power warning). When the battery power is e xhausted, power turns off automatically .
EN 53 CARD ERROR! Appears when the camcorder does not recognize the loaded memory card. Remove the memory card once and insert it again. Repeat these procedures until no indication appears. If the indication still appears, the memory card is corrupted.
EN 54 F Fade-In/Out .................................................... 墌 pg. 24 F ast-Forward The T ape .................................. 墌 pg. 14 Frame-By-Frame Playback ...................... 墌 pg. 14, 35 G Gain Up .........................
EN 55 P Picture Quality/Image Size ............................. 墌 pg. 11 Pla yback Special Eff ects ................................ 墌 pg. 35 Pla yback Zoom .............................................. 墌 pg. 35 P ower-Linked Oper ation ......
COPYRIGHT© 2002 VICTOR COMP ANY OF JAP AN, L TD . VICTOR COMP ANY OF JAPAN, LIMITED US Printed in Malaysia 1102-HO-UN-PJ 1 GR-D91US EN 41-56_Malaysia 02.
デバイスJVC GR-D91の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
JVC GR-D91をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC GR-D91の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC GR-D91の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC GR-D91で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC GR-D91を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC GR-D91の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC GR-D91に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC GR-D91デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
