JVCメーカーGR-DVP9の使用説明書/サービス説明書
ページ先へ移動 of 84
L YT1071-001A Master P age: Cover1 EN ENGLISH GR-D VP9 AU TO M AT I C DEMONSTRA TION 9 GETTING ST ARTED 10 VIDEO RECORDING & PLA YBA CK 17 DIGIT AL STILL CAMERA (D.
2 EN Master P age: Left-Safety-Dummy Using T his Instruction Manual ● All major sections are listed in the T able Of Contents on the cover page. ● Notes appear after most subsections . Be sure to read these as well. ● Basic and adv anced features/operation are separ ated for easier refer ence.
EN 3 Master P age: Right-Safety 䡲 T his camcorder i s designed ex clusively for th e digital video cassette, SD Memory Card and MultiMediaCard. Only cassettes marked “ ” and memory cards marked “ ” or “ ” can be used with this unit. Before recording an important scene… … make sure y ou only use cassettes with the Mini D V mark .
4 EN Master P age: Left-Safety IMPOR T ANT PRODUCT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. T his product has been engineered and manufactured to assure your personal safety .
EN 5 Master P age: Right-Safety USE 1. Accessories T o avoid personal injur y: ● Do not place this product on an unstable cart, stand, tripod, bracket or table. It ma y fall, causing serious injury to a child or adult, and serious damage to the product.
6 EN Master P age: Left NOTES: ● In order to maintain optimum performance of the camc order , provided cables ma y be equipped with one or more core filter . If a cable has only one core filter , the en d that is closest to the filte r should be connected to the camcorder .
EN 7 Master P age: Right How T o Attach The Grip Belt 1) Remove the pad and separate the tw o straps. 2) T hread one end of the strap g through the eyelet, then pass the other end through the loop. 3) Repeat the same procedure to attach the strap h to the other eyelet.
8 EN Master P age: Left-Heading0 CONTENTS AUTOMATIC DEMONSTRATION 9 GETTING STARTED 10 Power ........... ..................... ................. ..................... . 10 Grip Adjustment ................ ................. .................. .... 12 Viewfinder Adju stment .
EN 9 Master P age: Right-start A UTOMA TIC DEMONSTRA TION Automatic Demonstr ation takes place when “DEMO MODE” is set to “ON” (factory-preset). 䡲 Automatic Demonstration starts w hen there is no operation for about 3 minutes after the P ower Switch is set to “ A ” or “ M ” and no cassette is in the camcorder .
Master P age: Left-start 10 EN GETTING ST ARTED T his camcorder’ s 2-way po wer supply system lets you c hoose the most appropriate source of power . Do not use provided power supply units with other equipment. Charging The Battery Pack 1 Make sure you unplug th e camcorder’ s DC cord from the AC P ower Adapter/Charger .
EN 11 Master P age: Right Using The Battery Pack 1 Align the battery pack’ s two notches with the tabs on the camcorder’ s battery p ack mount. 2 Insert the terminal end 1 of the battery pack into the battery pack mount. 3 Firmly push the end 2 of the battery pac k until it locks into place.
12 EN Master P age: Left-Heading0 1 Loosen the belt. 2 P ass your right hand through the loop and grasp the grip. 3 Adjust your thumb and fingers through the grip to easily operate the Recording Start/Stop Button, P ower Switch and P ower Zoom (SHUTTLE SEARCH) Ring.
EN 13 Master P age: Right Press MONITOR BRIGHT + or – until the bright level indicator on the display mo ves and the appropriate brightness is reached.
14 EN Master P age: Left T he date/time is recorded onto the tape at all times, but its display can be turned on or off during pla yback. ( 墌 pg. 31, 41) 1 Set the P ower Switc h to “ M ” while pressing down the Lock Button located on the switch.
EN 15 Master P age: Right T he camcorder needs to be powered up to load or eject a cassette. 1 Slide down and hold OPEN/EJECT in the direction of the arrow , then pull the cassette holder cover open until it locks. T he cassette holder opens automatically .
16 EN Master P age: Left T he provide d memory card is alread y inserted in the camcorder at the time of purchase. 1 Make sure the camcor der’ s power is off. 2 Open the card cov er . 3 T o load a memory card , firmly insert it with its clipped edge first.
EN 17 Master P age: Right-start VIDEO RECORDING & PLA YB A CK VIDEO RECORDING NOTE: Before continuing, perfor m the procedures listed below: ● Pow e r ( 墌 pg. 10 ) ● Loading A Cassette ( 墌 pg. 15) 1 Slide down the lens cover . 2 Set the VIDEO/MEMOR Y Switch to “VIDEO”.
18 EN Master P age: Left Zooming Produces the zoom in/out effect, or an instantaneous change in image magnification. Zoom In T urn the Power Zoom (SHUTTLE SEARCH) Ring towards “T”. Zoom Out T urn the Power Zoom (SHUTTLE SEARCH) Ring towards “W”.
EN 19 Master P age: Right Ti me C o d e During recording, a time code is recorded on the tape. T his code is to confirm the location of the recorded scene on the tape during playbac k. If recording starts from a blank portion, the time code begins counting from “00:00:00” (minute:second:frame).
20 EN Master P age: Left-Heading0 VIDEO PLA YBA CK 1 Load a cassette. ( 墌 pg. 15) 2 Set the VIDEO/MEMOR Y Switch to “VIDEO”. 3 Set the P ower Switc h to “ P ” while pressing down the Loc k Button located on the switch. 4 T o start playback, press 4 / 9 .
EN 21 Master P age: Right Shuttle Search Allows high-speed searc h in either direction durin g video playbac k. 1) During play back, turn the SHUTTLE SEARCH Ring to the right ( 5 ) for forward sear ch, or to the left ( 3 ) for reverse searc h. 2) T o resume normal playback, press 4 / 9 .
22 EN Master P age: Left T hese are some basic type s of connections. When making the connections, refer also to your VCR and TV instruction manuals. * Connect when y our TV/VCR has S-VIDEO IN and A/V input connectors. In this case, it is not necessary to connect the yellow video cable.
EN 23 Master P age: Right-start DIGIT AL STILL CAMERA (D.S.C.) RECORDING & PLA YBA CK D.S.C. RECORDING Y ou can use your camcorder as a Digital Still Camera for taking snapshots. Still images are stored in the memory card. NOTE: Before continuing, perfor m the procedures listed below: ● Pow e r ( 墌 pg.
24 EN Master P age: Left-Heading0 D.S.C. PLA YBA CK Images shot with the cam corder are automatically numbered, then stored in numerical order in the memory card. Y ou can view the stored image s, one at a time, much like flipping through a photo album.
EN 25 Master P age: Right Y ou can view video clips ( 墌 pg. 48) stored in the memory card. 1 Load a memory card. ( 墌 pg. 16) 2 Set the VIDEO/MEMOR Y Switch to “MEMOR Y”. 3 Set the P ower Switc h to “ P ” while pressing down the Loc k Button located on the switch.
26 EN Master P age: Left Y ou can view several different files stored in the memory card at a time. This bro wsing capability makes it easy to locate a particular file you want. 1 F or Index Pla yback of image files , perform 1 – 6 in “Normal Playbac k Of Images” ( 墌 pg.
EN 27 Master P age: Right T he Protect mode helps prevent the accidental erasure of files. 1 Load a memory card. ( 墌 pg. 16) 2 Set the VIDEO/MEMOR Y Switch to “MEMOR Y”. 3 Set the P ower Switc h to “ P ” while pressing down the Loc k Button located on the switch.
28 EN Master P age: Left T o remov e protection from all files stored in the memo ry card 9 Press + or – to select “C ANC.ALL ”, and press SET/SELECT . T he PRO TECT screen appears. 10 Press + or – to select “EXECUTE”, and press SET/SELECT .
EN 29 Master P age: Right By resetting the file name , a new folder will be made. T he new files you are going to make will be stored in the new folder . It is convenient to separate the new files from previously made files. (A vailable only for Image and video clip files.
30 EN Master P age: Left T o Print By Select ing Still Images And Number Of Prints 1 P erform steps 1 – 8 in “T o Print All Still Images (One Print F or Each)” ( 墌 pg. 29). 2 Press + or – to select “CURRENT”, and press SET/SELECT . T he DPOF screen appears.
EN 31 Master P age: Right-start ADV ANCED FEA TURES MENUS FOR DET AILED ADJUSTMENT T his camcorder is equipped with an easy-to-use, on- screen menu system that simplifies many of the more detailed camcorder settings. ( 墌 pg. 32 – 41) 1 F or Video and D .
32 EN Master P age: Left-Heading0X2 MENUS FOR DET AILED ADJUSTMENT (cont.) 4) Press SET/SELECT . T he Menu Screen return s. ● Repeat the procedure if you wish to set other function menus.
EN 33 Master P age: Right WIPE – DOOR : Wipe in as the two halv es of a black screen open to the left and right, revealing the scene, or wipe out and the black screen reappears from left and right to cover the scene.
34 EN Master P age: Left RECORDING ME NUS (cont.) SEPIA : Recorded scenes hav e a brownish tint like old photos. Combine this with the Cinema mode for a classic look. MONO TON E : Like classic black and w hite films, your footage is shot in B/W . Used together with the Cinema mode, it enhances the “classic film” effect.
EN 35 Master P age: Right Zooming ZOOM (F actory-preset: 40X ) 10X : When set to “10X” while using digital zoom, the zoom magnification will reset to 10X since digital zoom will be disengaged.
36 EN Master P age: Left MANUAL Digital Image Stabilization T o compensate for unstable i mages caused by camera-shake, particularly at high magnification.
EN 37 Master P age: Right Wide mode WIDE MODE (F actory-preset: OFF ) OFF : Records with no change in the screen ra tio. F or pla yback on a TV with a normal screen ratio. CINEMA * : Inserts blac k bands at the top and bottom of the screen. T he indicator appears.
38 EN Master P age: Left NOTES: ● If a cassette is in the camc order , the demonstration cannot be turned on. ● “DEMO MODE” remains “ON” even if the camcorder power is turned off. ● If “DEMO MODE” remains “ON”, some functions will not be a vailable.
EN 39 Master P age: Right DSC Picture quality T he Picture Quality mode can be selected to best match your needs. T wo Pi cture Quality modes are a vailable: FINE ( ) and ST AND ARD ( ) (in order of quality).
40 EN Master P age: Left-Heading0 PLA YBA CK MENUS VIDEO Playback sound During tape playbac k, th e camcorder detects the sound mode in whic h the recording was made, and pla ys the sound back. Select the type of sound to accompany y our playbac k picture.
Master P age: Right-Heading0X2 EN 41 VIDEO DISPLA Y T he parameter s (except “OFF” in ON SCREEN settings) are the same as in the description on page 38. ON SCREEN (F actory-preset: LCD ) OFF / LCD / LCD/TV When set to “OFF”, the camcorder’ s display disappears.
42 EN Master P age: Left ● If Program AE with special effects ( 墌 pg. 33) is engaged, certa in modes of Program AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks. ● If SNAPSHO T is pressed when “DIS” is set to “ON” ( 墌 pg.
EN 43 Master P age: Right T he camcorder’ s Full Range AF system offers continuous shooting ability from close-up (as close as approx. 5 cm (2”) to the subject) to infin ity .
44 EN Master P age: Left Manual exposure control is recommended in the following situations: ● When shooting using reverse lighting or w hen the background is too bright. ● When shooting on a reflective natur al background such as at the beach or w hen skiing.
EN 45 Master P age: Right Backlight compensation brightens the subject quickly . Press BACK L IG HT . The indicator is displa yed and the subject is brightened.
46 EN Master P age: Left T he sound effects pre-stored in the provided memory card can be dubbed onto a tape. 1 Load a cassette. ( 墌 pg. 15) 2 Load the provided memory card. ( 墌 pg. 16) 3 Set the VIDEO/MEMOR Y Switch to “VIDEO”. 4 Set the P ower Switc h to “ A ” or “ M ” while pressing down the Lock Button located on the switch.
EN 47 Master P age: Right T o make thumbnail images during video recording aut omatically 1 Load a cassette. ( 墌 pg. 15) 2 Load a memory card. ( 墌 pg. 16) 3 Set the VIDEO/MEMOR Y Switch to “VIDEO”. 4 Set the P ower Switc h to “ A ” or “ M ” while pressing down the Lock Button located on the switch.
48 EN Master P age: Left 6 Press + or – to select “NA VI.DEL. ”, and pres s SET/SELECT . T he Sub Menu appears. 7 By pressing + or – ... Select “IMA GE SEL. ” to delete the currently displa yed thumbnail image. Select “T APE SEL. ” to de lete all thumbnail images for the tape whic h contains the currently displa yed image.
EN 49 Master P age: Right T o make video clips from real-time camera image 1 Load a memory card. ( 墌 pg. 16) 2 Set the VIDEO/MEMOR Y Switch to “MEMOR Y”. 3 Set the P ower Switc h to “ A ” or “ M ” while pressing down the Lock Button located on the switch.
50 EN Master P age: Left-Heading0 DUBBING . * Connect w hen your TV/VCR has an S-VIDEO IN/OUT connector . I n this case, it is not necessary to connect the yellow video cable. ** When connecting the cable, open the co ver . T o use this camcorder as a play er .
EN 51 Master P age: Right It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a D V connector . Since a digital signal is sent, there is little if any image or sound deterioration. * When connecting the cable, open the cover .
52 EN Master P age: Left It is also possible to copy recorded scenes from another video unit equipped with a DV connector onto the camcorder . Since a digital signal is sent, there is little if any image or sound deterioration. * When connecting the cable, open the cover .
EN 53 Master P age: Right Still images can be dubbed fr om a tape to a memory card. 1 Load a cassette. ( 墌 pg. 15) 2 Load a memo ry card. ( 墌 pg. 16) 3 Set the VIDEO/MEMORY Switch to “VIDEO”. 4 Set the P ower Switch to “ P ” w hile pressing down the Lock Button located on the switc h.
54 EN Master P age: Left T he Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Pla yback, Stop, P ause, Fa st-F orward and Rewind) of your VCR. It also makes additional pla yback functions possible.
EN 55 Master P age: Right . Slow-Motion Playback Allows slow-speed sear ch in either direction during video playbac k. During normal video playbac k, press SLOW ( Y I o r I U ) more than approx. 2 seconds. ● After approx. 1 minute in Slow Rewind or approx.
56 EN Master P age: Left T he audio trac k can be customised only when recorded in the 12-bit and SP modes. ( 墌 pg. 34) 1 Pla y back the tape to locate the point where editing will start, then press PA U S E ( 9 ). 2 While holding A. DUB ( D ) on the remote control, press PA U S E ( 9 ).
EN 57 Master P age: Right 1 Load the provided memory card. ( 墌 pg. 16) T hen, perform step 1 and 2 of “ Audio Dubbing” ( 墌 pg. 56). 2 Press MENU . The M enu Screen appears. 3 Press + or – to select “ s ”, and press SET/ SELECT . T he SYSTEM Menu appear s.
58 EN Master P age: Left Create edited videos easily using your camcorder as the source pla yer . Y ou can select up to 8 “cuts” for automatic editing, in any order you like.
EN 59 Master P age: Right Make Connections Also refer to page 22. * Connect w hen your TV/VCR has an S-VIDEO IN connector . In this case, it is not necessary to connect the yellow video cable. ** If necessary , use this cable for connections. *** When connecting the cable, open the cover .
60 EN Master P age: Left Select Scenes 6 Press PLA Y ( U ) and then press R.A.EDIT ON/OFF on the remote control. T he Random Assemble Editing Menu app ears. 7 If using a Wipe/F ader at the beginning of the scene, press FA D E / W I P E on the remote control.
EN 61 Master P age: Right Automatic Editing T o VCR 13 Rewind the tape in the camcorder to the beginning of the scene y ou want to edit and press PAU S E ( 9 ). 14 Press VCR REC STBY ( 79 ), or manually engage the VCR’ s Record-P ause mode. 15 Press ST ART/ST OP on the remote control.
62 EN Master P age: Left-Heading0 SYSTEM CONNECTIONS [A] Using USB cable It is possible to do the following things: ● T ransfer still images stored on a memory card to a PC. ● T ransfer still/moving images recorded on a tape to a PC. ● Capture still/moving images in real-time.
EN 63 Master P age: Right T his camcorder can be used as a We bCam via USB connection. * When connecting the cable, open the co ver . 1 Make sure all necessary s oftware (prov ided) are installed in your PC and all units are turned off. 2 Connect the camcorder to your PC using the USB cable.
Master P age: Left-start 64 EN REFERENCES DET AILS ITEMS NOTES V Po w e r ( 墌 pg. 10) ● Perform c harging wher e the temperatur e is between 10°C and 35°C (50°F and 95°F). 20°C to 25°C (68°F to 77°F) is th e ideal temperature r ange for c harging.
EN 65 Master P age: Right-Heading0 TROUBLESHOOTING If, after following the steps in the chart below , the probl em still exists, please consult your nearest JVC dealer . Power Video and D.S.C . Recording T he camcorder is a microcomputer-controlled device.
66 EN Master P age: Left Video and D.S.C. Playback 7. T he LCD monitor or viewfinder indications blink. 7. • Certain Wipe/F ader eff ects, certain modes of Program AE with special effects, “DIS” and other functions that cannot be used together are selected at the same time.
EN 67 Master P age: Right Advanced features SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 13. T he focus does not adjust automatically . 13. • F ocus is set to the Manual mode. • T he recording was done in a dark place, or the contrast was l ow . • T he lens is dirty or covered with condensation.
68 EN Master P age: Left Other problems SYMPTOM POSSIBLE CA USES CORRECTIVE ACTION 24. T he CHARGE indicator on the AC P ower Adapter/Charge r does not light. 24. • T he temperatur e of the battery is extremely high/low . • Charging is difficult in places subject to extremely high/ low temperatures.
EN 69 Master P age: Right 33. Colored bright spots appear all over the LCD monitor or the viewfinder . 33. • T he LCD monitor and the viewfinder are made with high-precision technology . Howeve r , black spots or bright spots of light (red, green or blue) ma y appear constantly on the LCD monitor or the viewfinder .
70 EN Master P age: Left-Heading0 CA UTIONS When using the AC P ower Adapter/Charger in ar eas other than the USA 䡲 T he provided A C Pow er Adapter/Charger features automatic voltage selectio n in the AC range from 110 V to 240 V .
EN 71 Master P age: Right Memory Cards T o properly use and store your memory cards, be sure to read the following cautions: 1. During use… ... make sure the memory card bears the SD or MultiMediaCard mark. ... make sure the memory card is positioned properly when inserting.
72 EN Master P age: Left How T o Handle A CD-ROM • T ake care not to soil or scratch the mirror surface (opposite to the printed surface). Do not write anything or put a stic ker on either the front or back surface. If the CD-ROM gets dirty , gently wi pe it with a soft cloth outward from the center hole using a circular motion.
EN 73 Master P age: Right-Heading0 USER MAINTENANCE 1 T urn off the camcorder . 2 Slide down and hold OPEN/EJECT in the direction of the arrow , then pull the cassette holder cover open until it locks. T he cassette holder opens automatically . Remove the cassette.
74 EN Master P age: Left-Heading0 SPECIFICA TIONS Camcorder For G e n e ra l P ow er supply : DC 6.3 V (Using AC P ower Adapter/Charger) DC 7.2 V (Using battery pack) P ow er consumption LCD monitor off, viewfinder on : Approx. 3.9 W LCD monitor on, viewfinder off : Approx.
EN 75 Master P age: Right Specifications shown are for SP mode unless otherwise indicated. E & O.E. Design and specifications subject to change without notice. For Connectors S/A V S-V ideo input : Y : 0.8 V to 1.2 V (p-p), 75 Ω , analog C: 0.2 V to 0.
Master P age: Left-start 76 EN INDEX INDEX Contr ols, Connect ors And Indicat ors OFF PLAY A M 4 5 6 1 2 3 8 9 0 qw e r t y u i 7 GR-DVP9US.book Page 7 6 Wedne sday, January 22, 2003 5:35 PM.
EN 77 Master P age: Right Controls a •E-Mail Clip Recording Button [E-MAIL] .......................... .................. 墌 pg. 49 •Information Button [INFO]................ 墌 pg. 26 b Menu Button [MENU] .......................... 墌 pg. 31 c •+, – Button .
78 EN Master P age: Left-Heading0 INDEX Indications Indications LCD Monitor/Viewfinder Indications During Video Recording Only a Navigation Indicator ( 墌 pg. 47) (Appears when “NA VIGA TION” is set to other than “MANUAL ”.) b Selected Wipe/F ader Effect I ndicator ( 墌 pg.
EN 79 Master P age: Right (Appears when “GAIN UP” is set to “ AUT O” and the shutter speed is automatically adjusted.) c Flash Indicator (Appears when the optional flash attached to the info-shoe is ready .) d White Balance Indicator ( 墌 pg.
80 EN Master P age: Left-Heading0 INDEX Indications ( cont.) Wa r n i n g I n d i c a t i o n s Indications Function Displays the battery remaining po wer . Remaining power level: high Remaining power level: exhausted As the battery power comes close to nil, the battery indicator blinks.
EN 81 Master P age: Right Indications Function IN SE RT ER RO R! <CANNOT EDIT ON A LP RECORDED T APE> <CHECK T APE’S ERASE PRO T ECTION T AB> ● Appears if Insert Editing is attempte d on a tape recorded in the LP mode.
Master P age: Left-start 82 EN TERMS TERMS A AC Power Adapter/Charger ........................... 10 , 11 Animation ........................................................... 36 Audio Dubbing ........................................... ........ 56 Auto Focus .
EN 83 Master P age: Right P Picture Quality (QUALITY) .......................... ........ 39 Playback sound (SOUND MODE, 12bit MODE) ........................... 40 Playback Special Effects .............................. ........ 55 Playback Zoom .....
COPYRIGHT© 2003 VICT OR COMP ANY OF JAP AN, L TD . EN GR-D VP9 Master P age: Cover4 US Printed in Japan 0203-FO-ID-VP GR-DVP9US_12Cover4.fm Pag e 84 Wednesday, January 22 , 2003 5:51 PM.
デバイスJVC GR-DVP9の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
JVC GR-DVP9をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC GR-DVP9の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC GR-DVP9の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC GR-DVP9で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC GR-DVP9を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC GR-DVP9の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC GR-DVP9に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC GR-DVP9デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
