JVCメーカーGV-DS2の使用説明書/サービス説明書
ページ先へ移動 of 72
G V -DS2 JLIP VIDEO CAPTURE DOCKING STATION LYT0002-0T7A INSTRUCTIONS ENGLISH EN.
2 EN Dear Customer , Thank you for purchasing this VIDEO CAPTURE DOCKING ST A TION. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product. SAFETY PRECAUTIONS W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
EN 3 CAUTIONS SOME DO’S AND DON’TS ON THE SAFE USE OF EQUIPMENT This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.
4 EN CAUTIONS (cont.) Failure to heed the following precautions may result in damage to the VIDEO CAPTURE DOCKING ST A TION. 1. DO NOT place the VIDEO CAPTURE DOCKING ST A TION . . . .... in an environment prone to extreme temperatures or humidity . .
EN 5 CONTENTS MAJOR FEA TURES 8 CONTROLS AND CONNECTORS 10 CAMCORDER A TT ACHMENT 1 1 CONNECTIONS 12 JLIP VIDEO CAPTURE SOFTW ARE SECTION ....... 15 GETTING ST ARTED 16 INST ALLA TION (JLIP V ideo Capture Software) 17 OPEN & CLOSE (Basic Operation Procedure) 18 Preparation .
6 EN CONTENTS (cont.) ADDITIONAL OPERA TIONS 33 Counter value change ............................................................ 33 Counter reset ..................................................................... 33 Delete index image and full image .
EN 7 VIDEO PRINTER WINDOW BUTTONS AND DISPLA YS 58 VIDEO PRINTER OPERA TION (GV -PT2) 60 Printing ............................................................................ 60 Quitting the "Video Printer" window ...........................
8 EN MAJOR FEA TURES Business presentations Images captured from video can be incorpo- rated into business documents to spice up your presentations. Internet homepage Images captured from video can be incorpo- rated in your Internet homepage using image editing software.
EN 9 T wo software programs are provided. JLIP Video Capture Software ( Z pg. 12 – 41) JLIP Video Capture Software This is the software described in this manual. Video Capture Facility V ideo images from video sour ce units such as camcorders or VCRs can be captured as 768 x 552 still images with 16.
10 EN CONTROLS AND CONNECTORS DIGITAL jack Z p. 13, 14 • Connect to the computer’s RS-232C terminal (COM port). STOP button Rewind (REW) button Fast-Forward (FF) button LOCK lever RELEASE button PLAY button PAUSE button EDIT button JLIP jack Z p.
EN 11 2 3 1 Before attachment, make sure the camcorder's power is off. 1 . OPEN COVER Slide the Multi connector cover (MUL TI) on the bottom of the camcorder in the direction of the arrow until you hear a click. 2 . A TT ACH Attach the camcorder by aligning the mark on it with the one on the V ideo Capture Docking Station.
12 EN CONNECTIONS n T o assure safety , make sure all units are turned off before making any connections. n The video images will be displayed on the LCD screen of the attached GR-DVX series camcorder . Y ou cannot view the images on the computer screen.
EN 13 n The V ideo Capture Docking Station does not receive power from the battery pack installed in the camcorder or from the AC Power Adapter/Char ger attached to the camcorder .
14 EN WHEN USING A RECORDING DECK WITH NEITHER A JLIP CONNECTOR NOR A REMOTE P AUSE JACK When using the JLIP V ideo Producer Software . . . ● When using a recording deck with neither a JLIP connector nor a remote pause jack, set your VCR brand using the RM-V71 1U remote control unit then perform editing using the RM- V71 1U.
EN 15 JLIP VIDEO CAPTURE SOFTW ARE SECTION Operating Environment .......................................... 16 Connectable Devices ............................................. 16 Installation ........................................................ 17 Open & Close .
16 EN GETTING ST ARTED What is video capture software ? V ideo capture software is a type of application program that allows you to capture video images from camcorders and VCRs and store them in personal computers running under the W indows T operating system.
EN 17 INST ALLA TION (JLIP V ideo Capture Software) WINDOWS T 95 Refer to the W indows T 95 manual or your computer ’ s manual for details on basic W indows T 95 operating procedures. Installation Procedure This software offers you the choise of viewing on-screen messages in English or French.
18 EN OPEN & CLOSE (Basic Operation Procedure) The V ideo Capture software can be started up in the same way as any other program running under W indows. The procedure differs slightly depending on whether you’re using W indows T 3.1 or W indows T 95.
EN 19 HOW TO CLOSE THE PROGRAM Double-click the control menu button in W indows T 3.1 or click " Exit " in the " File (F) " menu. In W indows T 95, simply click the Close button. If you try to close the program with no image data saved, the message " The album has not been saved.
20 EN INITIALIZA TION INITIALIZING JLIP The first time you start the V ideo Capture software, JLIP initialization is required. This sets which of the computer ’ s COM ports (connector into which the RS-232C cable is plugged) is connected to the JLIP V ideo Capture Docking Station.
EN 21 SELECT UNITS 6 . Call up the " Device Selection " window . 7 . Click the name of the unit required. •The word "VCRCAMERA" appears in the VCR box to indicate the V ideo source unit is now in use. •The word " MODULE " appears in the Video Capture box to indicate the V ideo Capture Docking Station is now in use.
22 EN HOW THE DESKTOP WORKS MAIN DESKTOP WINDOW 01 00:01:23:12 02 00:02:17:21 03 00:07:01:19 06 00:39:03:11 07 00:47:53:03 08 05 00:20:39:18 04 00:37:05:06 --:--:--:-- JLIP File Edit Set-up Window.
EN 23 02 00:02:17:21 03 00:07:01:19 04 00:37:05:06 3 Image display area Each time you press the Capture button an index image is captured into the image area. Up to 99 images can be captured, with up to five images in one horizontal frame. Index images are provided to allow you to confirm that you have captured the images you want.
24 EN HOW THE DESKTOP WORKS (cont.) Each pulldown menu is configured as follows MENU BAR All program functions can be selected from the menus in the menu bar . Click any item in the menu bar to open the corresponding pulldown menu. Then click the desired command in the pulldown menu.
EN 25 Deletes space when an index image has been deleted ( Z p. 34). The VCR operation window appears to allow the computer to operate the VCR. Window Arrange Index VCR [VCR] operation window 00.
26 EN VIDEO CAPTURE CAPTURING VIDEO IMAGES There are three capture modes available: Step by Step , Program and Interval. Image data flow Digital camcorder V ideo signal GV -DS2 (Image stored in video .
EN 27 STEP BY STEP CAPTURE Use the Step by Step Capture mode when you want to: •Capture a smaller number of images •Confirm the images being captured.
28 EN VIDEO CAPTURE (cont.) AUTOMA TIC CAPTURE There are two types of automatic capture: Program mode and Interval mode. Y ou can save time in either mode because, once the initial settings have been stored or you have decided what pictures to capture, the subsequent capture process is carried out automatically .
EN 29 4 Click " Window " — " VCR " to call up the VCR Operation window . 5 Operate the video sour ce unit via the VCR Operation window . 6 Click the " Capture " button on the desired video image, and index image data (80 x 60 pixels) is transferred to the computer .
30 EN VIDEO CAPTURE (cont.) Set-up Capture Mode Image Format Device Change Preroll Initialize ID Change Counter Reset Step by Step Automatic 00:01:23:12F I VCR Capture Transfer NOTE: • Make sure that enough hard disk space is available on your computer before executing video transfer .
EN 31 SA VE PICTURE SA VING Select when storing the contents displayed in the image display area (page 23). Enter title name OK c:captureindex001 c: capture c: Folder: Title: (Untitled) Cancel Save Al.
32 EN SELECTING A PICTURE FORMA T Under " Image Format ", you can specify the full image data format and the capture mode. PICTURE FORMA T SETTING 3 Select capture mode. •There are two different settings avail- able: " Frame Picture " and " Field Picture ".
EN 33 ADDITIONAL OPERA TIONS COUNTER VALUE CHANGE If you want to replace a captured image with a different one, you can capture the new one by changing the counter value.
34 EN DELETE INDEX IMAGE AND FULL IMAGE Y ou can delete any captured picture. Both index image (80 x 60 pixels) and full image (768 x 552 pixels) are deleted. 1 Click the image display box you want to delete. •The box is bordered in green. 2 Open the menu bar and click " Edit " — " Delete ".
EN 35 CREA TE NEW FOLDER Creating a new folder (directory) is a good idea when capturing an image from another video tape. 1 Open the menu bar and click " File " — " New Album ". •The image display area is refreshed. •If the index image data on screen is not saved, you will be asked whether to save or not.
36 EN JLIP VIDEO PRODUCER SOFTW ARE USING JLIP VIDEO PRODUCER SOFTW ARE DA T A The V ideo Capture Docking Station can capture JLIP V ideo Producer software data at an edit-in point corresponding to a preset counter number . Preparation •Make sure all units are properly connected ( Z p.
EN 37 HOW TO STORE JLIP VIDEO PRODUCER SOFTW ARE DA T A Data from this unit can be converted to JLIP V ideo Producer software files. If index image data is saved as a JLIP V ideo Producer software file, the file can be printed with the optional GV -PT2E V ideo Printer .
38 EN TROUBLESHOOTING NOTE : External noise or disturbance may interfere with the microprocessors built into the JLIP V ideo Capture Docking Station. If this happens, turn the power off and then turn it on again.
EN 39 Page 27 – 30 33 28 — 20 32 — Cause v There may be a slight difference between the counter of the video image that you want to capture and the Index image data/ Full image data captured in the computer . This is not a malfunction. v Counter reset is not available with digital camcorders.
40 EN LIST OF ERROR MESSAGES v Appears when: m Action: v Not connected to COM port set by JLIP Initialize. m Check the COM port number and connector and retry JLIP initialization. v Connected devices are not turned on. v Selected COM port is not connected properly .
EN 41 v Appears when: m Action: v V ideo unit is not in Play mode during Interval Capture. m Click "OK", set the video unit to Play and click "T ransfer" again. v Remaining disk space is under 1 MB. m Click "OK" , check disk space and select a drive with space available with "Save Image As…".
42 EN MEMO.
EN 43 JLIP VIDEO PRODUCER SOFTW ARE SECTION q The Readme.TXT file provides additional information for setup and information that is not included in the instruction manual. Please read the file before installing the provided software program. q Y ou can find the latest information (in English) on the provided software program at our www server .
44 EN GETTING ST ARTED What is JLIP ? JLIP* stands for Joint Level Interface Protocol, a new communication protocol which allows A V units equipped with a JLIP terminal to be controlled by a personal computer . * is a registered trademark of JVC. Operating Environment ● Personal computer with Microsoft T W indows T 3.
EN 45 INST ALLING (JLIP V ideo Producer Software) WINDOWS T 95 Refer to the W indows T 95 manual or your computer ’ s manual for details on basic W indows T 95 operating procedures. Installation Procedure This software offers you the choise of viewing on-screen messages in English or French.
46 EN ST ARTING JLIP VIDEO PRODUCER SOFTW ARE JLIP VIDEO PRODUCER Serial Port Selection Select a Serial Port. OK CANCEL COM 1 COM 2 COM 3 COM 4 Initializing JLIP Now checking devices' ID .
EN 47 4 SELECT DEVICE(S) Click on the name of the device you wish to control. Clicking "OK" brings up the JLIP VIDEO PRODUCER window . •It is possible to select a second device of a different type simultaneously , but it is impossible to select two same type devices simultaneously .
48 EN JLIP VIDEO PRODUCER FILE POWER PROGRAM PLAYBACK COUNTER Non Drop MEMO ID SCENE CUT IN CUT OUT SCENE ELAPSED TIME 00:04:58:19F IN/OUT OFF ON 00:00:00:09F 06 File Set-up Help Window Edit START 01.
EN 49 1. POWER button • T urns the device on and off. • If power is not supplied to the camcorder beforehand, you can not turn the camcorder on and off by clicking this button. • Some camcorders cannot be turned on and off by clicking this button.
50 EN Setting in/out points 1 PLA YBACK ON TV MONITOR Click © . Playback picture appears on the TV monitor . 2 SET CUT IN/OUT POINTS Select "Function Set" from "Set-up" in the Jlip V ideo Producer window and select "Edit T ape".
EN 51 Playing back one programmed scene 1 SELECT SCENE Click on the line where the CUT IN/OUT points you want to preview are displayed and that line will be highlighted. 2 ST ART PLA YBACK Click "SCENE". •The camcorder searches the scene by going to a point prior to the CUT IN point and starts playback at the CUT IN point.
52 EN BASIC OPERA TIONS (cont.) Dubbing Y ou can record all programmed scenes onto the tape in the recording deck. 1 PREP ARE NEW T APE Make sure the erase protection tab on the tape is present. Then insert it into the recording deck and set the recording deck to the Record-Pause mode.
EN 53 Saving the program list on hard disk It is possible to save all programmed scene information as a file in the computer . 1 ST ART SA VING Select " Save As " from "File" on the JLIP VIDEO PRODUCER window . •The " Save a program list " dialog box appears.
54 EN BASIC OPERA TIONS (cont.) Correcting the program counter data 1 DESIGNA TE SCENE Double-click on the scene you want to modify . OR . . . Click on the scene you want to modify and choose " Modify " from " Edit ". •The " Modify Edit Points " dialog box appears ( Z pg.
EN 55 T ransferring the programmed scene to an other position 1 DESIGNA TE SCENE TO BE TRANSFERRED Click on the scene you want to transfer and choose "Cut" from "Edit". •The message " Scene No. will be deleted. " appears.
56 EN BASIC OPERA TIONS (cont.) Selecting a P .AE/Effect There are 5 P .AE/Effects available to spice up the programmed scene. Y ou can select only one effect per programmed scene. 1 DESIGNA TE SCENE Click on the scene where you want to use a P .AE/Effect.
EN 57 P .AE/Effect buttons SEPIA Recorded scenes have a brownish tint like old photos. Combine this with the Cinema mode for a classic look. VIDEO ECHO Adds a “ghost” to the subject, giving your recording a “fantasy” feeling. STROBE Y our recording looks like a series of consecutive snapshots.
58 EN VIDEO PRINTER WINDOW BUTTONS AND DISPLA YS Video Printer POWER SELECT PIX STABILIZER OFF ON POSITION ID 20 STORE PRINT SOURCE MEMORY CLOSE STROBE SPEED HIGH LOW 16 4 OFF STROBE SELECTED SAME MULTI-PIX CONTENT Aperture Off ! ! OFF ON 1. POWER button 2.
EN 59 1. POWER button • T urns the device on and off. 2. POSITION button • Selects the position to store a scene in memory for Multi-Print. 3. ID number • Displays the selected device's ID number . 4. Message display • Displays the operating mode of the selected device.
60 EN VIDEO PRINTER OPERA TION (GV -PT2) Printing Before printing, perform the procedure listed below . ● Connect to image and sound source ( Z pg. 12, 13). ● Set VCR to external input. ● Set TV to VIDEO mode so that images from video printer appear .
EN 61 Quitting the JLIP VIDEO PRODUCER window 1 CHOOSE "EXIT" FROM "FILE" •The JLIP VIDEO PRODUCER window closes. Quitting the "Video Printer" window 1 CLICK "CLOSE" •The "V ideo Printer" window closes.
62 EN VIDEO PRINTER OPERA TION (GV -PT2) (cont.) Preparation • Load the tape into the video unit. • Convert the captured data to JLIP V ideo Producer software data and store it ( Z p. 37). • Select file name ( Z p. 54). • Prepare for printing (refer to the GV -PT2 instruction manual).
EN 63 3 Click the T itle bar in the JLIP VIDEO PRODUCER window and activate the window . 4 Select " Set-up " — " Function Set " — " Auto Capture ". 5 Click " ST ART " •The captured video data set first is searched and stored in the video printer .
64 EN ADV ANCED OPERA TIONS Changing ID number The device's ID number is preset at factory as follows: ex. Camcorder: 06 or 07 V ideo printer: 20 When connecting more than two same type devices, the same ID numbers will exist and a malfunction can occur .
EN 65 Changing the name of the device 1 ACCESS "NAME CHANGE" DIALOG BOX Choose "Name Change" from "Set-up" on the JLIP VIDEO PRODUCER window . •The "Name Change" dialog box appears. 2 SELECT DEVICE Click on the name of the device and "CHANGE".
66 EN ADV ANCED OPERA TIONS (cont.) Adjusting the gap between the stored edit-start point in the computer and the dubbed one in the recording deck During dubbing, the beginning of the scene stored in the computer can be missed or the scene prior to the transition you chose for the edit-start point can be dubbed into the recording deck.
EN 67 Counter reset It is possible to reset the counter of the connected video device (VHS,VHS-C). 1 REWIND T APE TO BEGINNING 2 RESET COUNTER Click "Set-up" — "Counter Reset" on the JLIP VIDEO PRODUCER window . •The connected recording deck counter is reset.
68 EN TROUBLESHOOTING MESSAGE Error – – This application will close. Check devices – – Confirm that power is ON. No devices detected to connect. Power ON all devices in system. Communication error (&H (number)) Check cable connection. Select the device to control.
EN 69 MESSAGE Memory full – – 99 events maximum. Enter correct value. Y our selection is not valid. Set a value from 0 to 59. Picture Wipe/Dissolve functions and Black & White Fader can not activate while Sepia or Monotone is used. This effect can not activate on the in point of scene No.
70 EN MAJOR SPECIFICA TIONS Power consumption : 9 W (when charging) Connectors S-V ideo : Output Y : 1.0 Vp-p, 75 ohms (S2 output) C : 0.3 Vp-p, 75 ohms V ideo : Output 1.0 Vp-p, 75 ohms (pin jack) (VIDEO output connector) Audio : Output –8 dB, 1 kiloohm (pin jack) JLIP (x 2) : 3.
EN 71 INDEX A Arrange Index ................................. Z pg. 34 Automatic Capture (AUT O) ....... Z pg. 28, 30 B Bitmap ...................................... Z pg. 26, 32 C Capture Mode ................................. Z pg. 32 Change ID ....
GV-DS2 COPYRIGHT© 1997 VICTOR COMPANY OF JAPAN, LTD. E Printed in Japan 0897MSV * UN * SN VICTOR COMP ANY OF JAPAN, LIMITED EN.
デバイスJVC GV-DS2の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
JVC GV-DS2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC GV-DS2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC GV-DS2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC GV-DS2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC GV-DS2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC GV-DS2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC GV-DS2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC GV-DS2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
