JVCメーカーGY-HMQ10Uの使用説明書/サービス説明書
ページ先へ移動 of 72
4K MEMORY CARD CAMERA RECORDER *The illustration show s the G Y -HMQ10U/G Y -HMQ10E with the supplied audio unit attached. (Microphone is optional.) For Future Reference: Enter the Model No. (located on the bottom of the camera) and Serial No. (located on the battery pack mount of the camera) below.
Contents Introduction Main Features ......................................................................... 3 Safety Precautions .................................................................. 4 Precautions for Proper Use ........................
Main Features This camera recorder enables recording of 4K2K/HD format images to an SDHC/SDXC card, and also playback of these images. Recording in 4K2K Mode You can record videos in the super fine 4K2K quality (3840 x 2160), which is equivalent to about four times the resolution of the full high definition quality.
Safety Precautions . This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling may apply. See www.dtsc.
. INFORMATION (FOR CANADA) RENSEIGNEMENT (POUR CANADA) This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
. ■ F or G Y -HMQ10E CAUTIONS: • To prevent shock, do not open the cabinet. No user serviceable parts inside. Refer servicing to qualified personnel. When you are not using the AC adapter for a long period of time, it is recommended that you disconnect the power cord from AC outlet.
. Information for Users on Disposal of Old Equipment and Batteries Products Battery Notice: The sign Pb below the symbol for batteries indicates that this battery contains lead.
. ATTENTION: The product you have purchased is powered by a rechargeable battery that is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery. (USA and Canada only) Battery Pack The supplied battery pack is a lithium-ion battery.
. Main Unit • For safety, DO NOT ... open the camera ’s chassis. disassemble or modify the unit. allow inflammables, water or metallic objects to enter the unit. leave the battery pack attached when the camera is not in use. ... ... ... place naked flame sources, such as lighted candles, on the apparatus.
Precautions for Proper Use Storage and Usage Locations o Allowable ambient temperature and humidity Be sure to use this unit within the allowable temperature range of 0°C to 40°C (32°F to 104°F) and a relative humidity of 35 % to 80 %. Using this unit beyond the allowable temperature range may cause it to malfunction.
SDHC/SDXC Cards o This camera recorder saves the recorded images and audio sound on the SDHC/SDXC card (sold separately) in the card slot. o Use an SDHC/SDXC card (4 GB to 64 GB) with Class 6 or higher performance and formatted using this camera recorder.
LCD Monitor/Viewfinder o The LCD monitor and viewfinder screens are manufactured using high-precision technology. Black spots may appear on the LCD monitor and viewfinder screens, or red, blue, and/or white spots may not disappear. However, this is not a malfunction and these spots are not recorded on the SDHC/SDXC card.
Names of Parts o Front o Top . AWB REC T W M NK B A D CE J FG H I L * Microphone is optional. A Tally lamp “Tally Settings” ( A p. 27) B Tally lamp “Tally Settings” ( A p. 27) C Vent Do not cover the vent. D [AWB]Auto White Balance button “Adjusting Automatic White Balance” ( A p.
Names of Parts (Continued) o Side (LCD Monitor) . CH-2 INPUT CH-1 3 4 5 2 1 2 3 0 CH-2 AUDIO INPUT AUTO MANU AL AUTO MANU AL FULL AUTO DOOR LOCK SD A E SET GAIN ADJ.
P [CH-1/CH-2] CH-1/CH-2 recording level adjustment knob For adjusting the audio input level for CH-1 or CH-2. “Adjusting the audio recording level” ( A p. 46) Q [CH1/CH2 AUDIO SELECT] CH-1/CH-2 audio selection switch For setting the method of adjusting the audio recording level for CH-1 or CH-2 to the Auto or Manual mode.
Names of Parts (Continued) o LCD Monitor Unit . CH-2 INPUT CH-1 3 4 5 2 1 2 3 0 CH-2 AUDIO INPUT AUTO M ANUAL AUTO MANUAL FULL AUTO DOOR LOCK SD A E SET GAIN ADJ.
o Rear o Side (Grip Belt) . REC ACCESS CAM MEDIA BATT DC G AB C E DF H I JK L M ON * Microphone is optional. A Battery lock release button “Removing the Battery” ( A p. 24) B USB Connector “Copying to Computer” ( A p. 57) C [DC] input terminal “Charging the Battery Pack” ( A p.
LCD Screen Display o LCD Screen Display Information (During Recording) All the items are displayed in the illustration for explanatory purposes. . 10X 10X 60P UXP 4K 0:00:00:00 0:00:00[000:00] WT Overlap AF 40SEC ≪ PLA Y REC MENU 10:45AM 12dB FAW CH1 CH2 1/4000 ±0.
Y Magnify button “Using the Magnifying Function” ( A p. 36) Z FAW “Using the Full Auto White (FAW) Function” ( A p. 42) a Gain level “Adjusting Manual Gain” ( A p. 38) b Zoom button “Zoom Operation” ( A p. 35) c Aperture value “Adjusting the Aperture” ( A p.
LCD Screen Display (Continued) o LCD Screen Display Information (During Playback) . 60P MENU ≪ REC UXP 4K 0:01:23 0:12:34 Overlap 40SEC 1 a 0 23 4 5 6 7 8 9 A 4K2K mode “Selecting a Video Recording Format or Recording Mode” ( A p. 33) B Record mode “Selecting a Video Recording Mode (HD Recording Only)” ( A p.
Using the Touch Screen There are two ways to operate the touch screen, namely “tap” and “drag”. The following are some examples. A Tap the displayed button (icon) or thumbnail (file) on the touch screen to make a selection. B Drag the thumbnails on the touch screen to search for the desired file.
Preparation and Adjustment Before Use Attaching the Audio Unit The audio unit (with handle) is not attached to the camera recorder unit when purchased. Attach the audio unit according to the following procedure. 1 Attach the audio unit by sliding it all the way into the shoe on the top of the camera recorder.
Adjusting the Grip Belt Open the pad and adjust the position of the grip belt accordingly. . A UDIO I MIC N OPE N Caution : 0 If the grip belt is loose, this unit may drop and result in injuries or damages. 0 Parents should take extra care when your child is using the camera recorder.
Charging the Battery Pack Charge the battery pack immediately after purchase and when the remaining battery power is low. 0 The battery pack is not charged at the time of purchase. 1 Set the [STANDBY/ON OFF] switch to [OFF]. . [ST ANDB Y/ON OFF] switch 2 Attach the supplied battery.
Turning On/Off the Power Turning On the Power Preparation: Attach a charged battery or connect the AC adapter. 0 To make use of a battery, refer to “Charging the Battery Pack” ( A p. 24). o When the AC adapter is connected 1 Connect the AC adapter to the [DC] terminal .
Clock Setting The “SET DATE/TIME!” screen appears when you turn on this unit for the first time after purchase, when it has not been used for a long time, or when the clock is not set yet. Set the clock before recording. 1 Set the [STANDBY/ON OFF] switch to [ON].
Assigning Functions to the USER Buttons This unit comes with three user buttons, [USER1], [USER2], and [USER3]. A specific function can be assigned to each button according to your preference. . CH-2 INPUT CH-1 3 4 5 2 1 2 3 0 CH-2 AUDIO INPUT AUTO MA NUAL AUTO MANU AL FULL AUTO DOOR LOCK A E SET GAIN ADJ.
6 Tap “OK”. . OK COMPLETED 0 Setting ends and returns to the menu screen. Caution : 0 Do not tap areas other than the “+” mark during touch screen adjustment (steps 4 - 5). Doing so may cause the touch screen to malfunction. Memo : 0 Adjust by lightly tapping with a corner of an SD card, etc.
Inserting an SDHC/SDXC Card This camera recorder comes with four SDHC/SDXC card slots. (Slots A, B, C, and D) 1 Set the [STANDBY/ON OFF] switch to [OFF]. 2 Open the door. 0 Slide the [DOOR LOCK] lever to the right, and pull the door toward you. 3 Insert an SDHC/SDXC card with the notched corner first.
Estimated Recordable Time of SDHC/SDXC Cards The estimated recordable time is only a guide. Differences may occur depending on the SDHC/SDXC card in use and the battery condition.
Viewing the Viewfinder/LCD Monitor You can monitor video images on this camera recorder using the viewfinder or LCD monitor. o Viewing with the viewfinder 1 Pull out the viewfinder. 2 Incline the viewfinder vertically to a position that enables easy viewing.
Selecting a Shooting Mode Selecting the Full Auto / Manual Shooting Mode There are two adjustment modes for shooting, namely the Full Auto and Manual modes. o Setting to the Full Auto shooting mode When [FULL AUTO] button is pressed once, the current adjustment mode is displayed.
Selecting a Video Recording Format or Recording Mode This camera recorder supports both 4K2K recording (4K2K mode) and HD recording (1920 mode). 0 4K2K recording: Super fine 4K2K video quality (3840 x.
Checking Image on Monitor before Shooting o Recording in 4K2K mode 1 Connect to a monitor. . 1 2 3 4 T o [HDMI] T erminal HDMI Mini Cable (Sold Separately) Monitor 0 Connect all the four [HDMI] terminals to a monitor that supports 4K2K output. 4K2K output is not possible unless all the four [HDMI] terminals are connected.
Zoom Operation Applicable to: Full Auto shooting mode A , Manual shooting mode M Adjusts the angle of view. 0 Use the W end (wide angle end) to shoot a wider field of view. 0 Use the T end (telephoto end) to magnify the subject for shooting. 0 Zoom ratio: 10x, optical 20x, dynamic (1920 mode only)* * Set using “ZOOM” in the recording menu.
Using the Focus Assist Function This feature temporarily switches the screen to black-and-white, and adds color to the contour of the focused image. There are two ways to activate the Focus Assist function. A Set “FOCUS ASSIST” in the recording menu to “ON”.
Using the Tele Macro Feature Applicable to: Full Auto shooting mode A , Manual shooting mode M Shortens the closeup distance at the telephoto (T) end of the zoom. (1 m B approx. 60 cm) There are two ways to set this feature. A Set “TELE MACRO” in the recording menu to “ON”.
Adjusting the Exposure Manually Applicable to: Full Auto shooting mode A , Manual shooting mode M Generally, the brightness of the subject that is being shot is automatically adjusted according to the reference values of the camera. However, the brighter or darker areas of an image may appear unclear depending on the shooting conditions.
Adjusting the Shutter Speed Applicable to: Manual shooting mode M The shutter speed can be set to a value according to the user’s preference. When this is set to Auto, the shutter speed is automatically controlled. 1 Set to the Manual shooting mode.
Adjusting the Aperture Applicable to: Manual shooting mode M The aperture value (F-number) of the lens can be set as follows. F-number Details Decrease The subject appears brighter. The focused range becomes sharper, while the background is blurred to produce a soft image.
Adjusting the White Balance Applicable to: Manual shooting mode M 1 Set to the Manual shooting mode. 0 Select a white balance type using the [WHT.BAL] switch. 0 You can select one of the three white balance types using the [WHT.BAL] switch. [WHT.BAL] switch Details B Switches to the white balance type that is stored in Position [B].
o Error Message If the auto white balance adjustment is not correctly completed, one of the following messages will appear for about 5 seconds. Error Message Status NG : OBJECT The object used is defective. Displayed when there is not enough white color on the object, or when the color temperature is not suitable.
Using the Image Stabilizer Feature Applicable to: Full Auto shooting mode A , Manual shooting mode M Reduces blurring of images due to camera shake. 0 Set “OIS” in the recording menu to “ON”.
Setting Time-lapse Recording Applicable to: Full Auto shooting mode A , Manual shooting mode M Enables the changes of a scene that occur slowly over a long period to be shown within a short time by taking frames of it at a certain interval. This is useful for making observations such as the opening of a flower bud.
Audio Recording Applicable to: Camera mode There are two ways to input audio sound. A Built-in microphone B [INPUT1] terminal / [INPUT2] terminal 0 The priority order of the input is in the sequence of B > A . 0 When you want to use the built-in microphone, remove the audio unit cable from the [AUDIO IN] terminal.
o Adjusting the audio recording level Select a method for adjusting the audio recording level. 0 Set the [CH1/CH2 AUDIO SELECT] switch. 0 Select whether to set each channel to the [AUTO] or [MANUAL] mode. AUTO: Use this setting to enable the auto adjustment mode.
Playing Back Videos You can select and play back the recorded videos from an index screen (thumbnail display). o Playback in 4K2K mode Preparation: Insert into slots A to D the four SDHC/SDXC cards that are used for recording in the 4K2K mode “Inserting an SDHC/SDXC Card” ( A p.
Playing Back in Magnified Display You can play back in magnified display to view the details. 1 Tap A . . 60P 4K 0:01:23 0:12:34 Overlap 2 Tap on the area to magnify. . 0 The “ + ” mark moves to the tapped position. 3 Tap C . . 0 The display is magnified with the “ + ” mark as the center.
Checking the Recording Date and Other Information You can view the recording information of the recorded videos. A Press the INFO button while playback of the video is paused. . CH-2 INPUT CH-1 3 4 5 2 1 2 3 0 CH-2 AUDIO INPUT AUTO MANU AL AUTO MANU AL FULL AUTO DOOR LOCK A E SET GAIN ADJ.
Screen Display During Playback . 60P 4K 0:01:23 0:12:34 Overlap Display Description A Timeline Bar Enables to change the playback position by tapping the desired scene. B Pointer Displays the current estimated playback position within the scene C A Magnifies the display.
4 Tap on the file to start playback. . A 60P 60P MENU ≪ RE C OTHER FILE Memo : 0 An MTS file is created in the EXTMOV folder when management information is corrupted. 0 Depending on the condition of the damaged file, playback might fail or may not run smoothly.
Playing Videos Recorded in 4K2K Mode 1 Connect to a monitor. 0 Set the [STANDBY/ON OFF] switch to [OFF]. . 1 2 3 4 T o [HDMI] T erminal HDMI Mini Cable (Sold Separately) Monitor 0 Connect all the four [HDMI] terminals to a monitor that supports 4K2K output.
Playing Videos Recorded in 1920 Mode 1 Connect to a monitor. 0 Set the [STANDBY/ON OFF] switch to [OFF]. . 1 2 3 4 T o [HDMI] T erminal HDMI Mini Cable (Sold Separately) Monitor 0 Connect the [HDMI 1] terminal to the monitor. Video is not output if the monitor is connected to a terminal other than [HDMI 1].
Deleting Unwanted Files If the remaining space on the SD card is running low, erase any unwanted videos. Memo : 0 Deleted files cannot be restored. 0 Files that are protected cannot be deleted. 0 Be sure to back up important files on a PC. Deleting the Currently Displayed File Deletes the currently displayed file.
Protecting Files Protect important videos to prevent them from being deleted accidentally. Caution : 0 When an SD card is formatted, even the protected files will be deleted. Protecting/Releasing Protection of the Currently Displayed File Protects or releases protection of the currently displayed file.
5 Tap “SET” to complete the setting. . ABC D 60P 60P 4K 4K PROTECT/CANCEL SET REL ALL SEL ALL 0 Protect marks I appear on the selected files. Protect marks I disappear from the deselected files.
Copying to Computer You can read and copy the files on the SD card by connecting this unit to a computer using a USB cable. 1 Connect to a computer. . A U D IO I M IC N O P E N [USB] Terminal USB Cable (Sold Separately) Computer 0 Set the [STANDBY/ON OFF] switch to [OFF].
List of Files and Folders Folders and files are created in the SD card as shown below. They are created only when necessary. . [JVCCAM_SDA]~ [JVCCAM_SDD] [JVCCAM_SD] [DCIM] [JVC] [JMAV] [EXTMOV] [DCIM] [PRIVATE] MOV_0001.MTS MOV_0002.MTS MOV_0003.MTS … … … [**A_0000] [**B_0000] [**C_0000] [**D_0000] [CLPEXT] [MP4] [THINF] INDEX.
Operating the Menu There are two types of menus in this unit. 0 Main menu: Menu that contains all the items specific to the video recording and video playback respectively. 0 “ Q ” (Common) menu in main menu: Menu that contains all common settings related to the video recording and playback modes.
Recording Menu You can change the recording settings in this menu. Setting Details FOCUS ASSIST When this is set to “ON”, the focused subject is outlined in color for easier focusing. Memo : 0 When FOCUS ASSIST is enabled, the image becomes black and white, while the outline of the focused object is displayed in the selected color.
Setting Details FAW For setting the [WHT.BAL.] switch position to assign the FAW (Full Auto White Balance) function to during manual shooting. Not set: FAW function is not assigned. A: assigns FAW to the A position. B: assigns FAW to the B position. PRESET: assigns FAW to the PRESET position.
Setting Details REC MODE For setting the image quality when “SYSTEM SELECT” is in the 1920 mode. UXP: Enables recording in the best picture quality. 0 Applies to Blu-ray discs only. Videos taken in high-definition quality cannot be saved to DVDs. XP: Enables recording in high picture quality.
Setting Details AUDIO MONITOR For setting the audio sound of the headphone. MIX: Outputs mixed sound. STEREO: Outputs stereo sound. MIC LEVEL METER Setting this to “ON” displays the microphone level screen. USER1 USER2 USER3 You can assign any one of the following functions to each of the [USER1], [USER2], and [USER3] buttons.
Setting Details MONITOR BRIGHTNESS Sets the brightness of the LCD monitor. AUTO: Sets the brightness automatically to “4” when using outdoors and to “3” when using indoors. 4: Brightens the backlight of the monitor regardless of the surrounding conditions.
Error Displays and Actions Error Message Action FORMAT ERROR! 0 Check the operating procedure, and perform once again. “Formatting (Initializing) SDHC/SDXC Cards” ( A p. 30) 0 Turn off and on this unit again. MEMORY CARD ERROR! 0 Check that the card is supported by this unit.
Error Message Action RECOVERY OF FILE FAILED UNABLE TO RECORD FURTHER WITH THIS COMBINATION OF CARDS 0 Adjust the number of files on the four cards to a consistent number by using a computer to delete the maximum file number in the folder with the maximum number.
Trouble Action Shooting stops by itself. 0 Shooting may stop halfway due to the nature of the SDHC/SDXC card. B Check whether the card is a recommended SD card (Class 6 or higher). “SDHC/SDXC Cards” ( A p. 11) B Erase the contents of the SDHC/SDXC card (Delete, Format).
Trouble Action The [CH-1/CH-2] recording level adjustment knob does not work. 0 Is the [CH1/CH2 AUDIO SELECT] switch set to [AUTO]? SDHC/SDXC card cannot be initialized (formatted). 0 Is the write protection switch of the SDHC/SDXC card turned on? Turn off write protection if it is on.
Specifications Camera Item Details Power supply Using AC adapter: DC 12 V Using SSL-JVC50 battery pack: DC 7.4 V Power Consumption * When the HDMI cable is not connected 0 4K2K mode Approx. 17.5 W (when “MONITOR BRIGHTNESS” is set to “3” during the use of LCD monitor) Approx.
Video (4K2K mode) Item Details Recording/ Playback format MP4 standard Video: MPEG-4 AVC/H.264 Audio: AAC 2ch Extension .MP4 Signal system Digital HD system 2160/60p, 2160/50p, 2160/24p Quality 3840 x 2160 pixels Maximum approx.
Dimensional Outline Drawing (Unit: mm) . AWB CH-2 INPUT CH-1 3 4 5 2 1 2 3 0 CH-2 AUDIO INPUT AUTO MANU AL AUTO MANU AL FULL AUTO DOOR LOCK SD A E SET GAIN ADJ.
GY-HMQ10U/GY-HMQ10E 4K MEMORY CARD CAMERA RECORDER Q 2012 JVC KENWOOD Corporation LYT2468-001A-M.
デバイスJVC GY-HMQ10Uの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
JVC GY-HMQ10Uをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC GY-HMQ10Uの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC GY-HMQ10Uの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC GY-HMQ10Uで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC GY-HMQ10Uを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC GY-HMQ10Uの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC GY-HMQ10Uに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC GY-HMQ10Uデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。