JVCメーカーKD-G431の使用説明書/サービス説明書
ページ先へ移動 of 28
CD RECEIVER KD-G431 For installation and connections, refer to the separate manual. INSTRUCTIONS GET0410-003A [EX/EU] For canceling the display demonstration, see page 5.
2 ENGLISH Caution on volume setting: Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level. How to reset your unit • Your preset adjustments will also be erased.
ENGLISH 3 The following marks are used to indicate... : Built-in CD player operations. : External CD changer operations. : Indicator displayed for the corresponding operation. How to use the M MODE button If you press M MODE, the unit goes into functions mode, then the number buttons and 5 / ∞ buttons work as different function buttons.
4 ENGLISH Parts identification Control panel Display window 1 Control dial 2 0 (eject) button 3 Loading slot 4 T/P (traffic programme/programme type) button 5 DISP (display) button 6 4 / ¢ buttons 7 .
ENGLISH 5 To drop the volume in a moment (ATT) To restore the sound, press the button again. To turn off the power Basic settings • See also “General settings — PSM” on pages 13 –15. 1 2 1 Canceling the display demonstrations Select “DEMO,” then “DEMO OFF.
6 ENGLISH Storing stations in memory You can preset six stations for each band. FM station automatic presetting — SSM (Strong-station Sequential Memory) 1 Select the FM band (FM1 – FM3) you want to store into. 2 3 “SSM” flashes, then disappears when automatic presetting is over.
7 ENGLISH Ÿ Select one of your favorite programme types. or Select one of the PTY codes (see page 9). ! Start searching for your favorite programme. If there is a station broadcasting a programme of the same PTY code as you have selected, that station is tuned in.
8 ENGLISH To activate and select your favorite PTY code for PTY Standby Reception, see page 14. The PTY indicator either lights up or flashes. • If the PTY indicator lights up, PTY Standby Reception is activated. • If the PTY indicator flashes, PTY Standby Reception is not yet activated.
9 ENGLISH Automatic station selection— Programme Search Usually when you press the number buttons, the preset station is tuned in. If the signals from the FM RDS preset station are not sufficient fo.
10 ENGLISH To fast-forward or reverse the track To go to the next or previous tracks To go to the next or previous folders (only for MP3 or WMA discs) For MP3 discs: For WMA discs: To locate a particu.
11 ENGLISH Changing the display information While playing an audio CD or a CD Text While playing an MP3 or a WMA * 2 disc • When “TAG DISP” is set to “TAG ON” (see page 14) • When “TAG D.
12 ENGLISH Sound adjustments You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer). 1 2 Indication (For) BAS * 1 MID* 2 TRE* 3 S.
13 ENGLISH Indications Item ( : Initial) Selectable settings, [reference page] DEMO Display demonstration • DEMO ON • DEMO OFF : Display demonstration will be activated automatically if no operation is done for about 20 seconds, [5].
14 ENGLISH Indications Item ( : Initial) Selectable settings, [reference page] PTY-STBY * 2 PTY standby OFF, PTY codes : Activates PTY Standby Reception with one of the PTY codes, [9]. TA VOL * 2 Traffic announcement volume VOL 00 – VOL 30 or 50 * 3 [Initial: VOL 15] P-SEARCH * 2 Programme search • ON • OFF : Activates Programme Search, [9].
ENGLISH 15 Indications Item ( : Initial) Selectable settings, [reference page] IF BAND Intermediate frequency band • AUTO • WIDE : Increases the tuner selectivity to reduce interference noises between close stations.
16 ENGLISH Storing DAB services in memory You can preset six DAB services (primary) for each band. 1 Select a service you want (see steps ~ to ⁄ on page 15). 2 Select the preset number (1 – 6) you want to store into. Tuning in to a preset DAB service 1 2 Select the preset DAB service (primary) number (1 – 6) you want.
ENGLISH 17 Preparations: Make sure “CHANGER” is selected for the external input setting, see page 14. ~ Ÿ Playback starts automatically from where it has been paused * 1 or stopped * 2 previously. ! Adjust the volume. ⁄ Adjust the sound as you want.
18 ENGLISH Selecting the playback modes 1 2 Select your desired playback mode. 7 Repeat play ONE RPT Functions the same as “Repeat One” of the iPod or “Repeat Mode = One” for the D. player. ALL RPT Functions the same as “Repeat All” of the iPod or “Repeat Mode = All” for the D.
ENGLISH 19 Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode. • Do not leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time; otherwise, it may explode.
20 ENGLISH Center holder Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
ENGLISH 21 To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.
22 ENGLISH • If you want to know more about RDS, visit <http://www.rds.org.uk>. Disc operations Caution for DualDisc playback • The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended.
ENGLISH 23 • This unit cannot play back the following files: – MP3 files encoded with MP3i and MP3 PRO format. – MP3 files encoded in an inappropriate format. – MP3 files encoded with Layer 1/2. – WMA files encoded with lossless, professional, and voice format.
24 ENGLISH Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.
ENGLISH 25 Continued on the next page Symptoms Remedies/Causes MP3/WMA playback • Tracks are not played back in the order you have intended. Playback order is determined when the files are recorded. • Elapsed playing time is not correct. This sometimes occurs during play.
26 ENGLISH Symptoms Remedies/Causes iPod/D. player playback • The iPod or D. player does not turn on or does not work. • Check the connecting cable and its connection. • Update the firmware version. • Change the battery. • Buttons do not work as intended.
ENGLISH 27 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
EN, FR 1006DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit © 2006 Victor Company of Japan, Limited Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety.
デバイスJVC KD-G431の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
JVC KD-G431をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC KD-G431の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC KD-G431の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC KD-G431で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC KD-G431を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC KD-G431の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC KD-G431に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC KD-G431デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
