JVCメーカーKD-SX838Rの使用説明書/サービス説明書
ページ先へ移動 of 35
CD RECEIVER CD-RECEIVER RECEPTEUR CD CD-RECEIVER BEDIENUNGSANLEITUNG MANUEL D'INSTRUCTIONS GEBRUIKSAANWIJZING INSTRUCTIONS VNN3832-311S [E] Detachable KD-SX838R/S737R/S707R For installation and connections, refer to the separate manual.
2 DANGER: Invisibl e la ser ra diation when o p en and interlock f ailed or d efeated. AVOID DIRECT EXPOSURE TO BEAM. ( e ) ADV ARS EL: Usynlig la ser - stråling ve d å bning, når sikk erh ed safbryd er e e r u d e af funkt i on. U ndgå udsæt- telse for stråling.
3 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS BASIC OPERA TIONS ....................
4 1 T urn on the power . 2 Select the source. T o operate the tuner , see pages 5 – 16. T o operate the CD player , see pages 17 – 19. ONL Y FOR KD-SX838R: T o operate the CD changer , see pages 29 – 31. 3 Adjust the volume. 4 Adjust the sound as you want (see pages 20 – 22).
5 ENGLISH KD-SX838R KD-SX838R BAND TUNER KD-S737R/S707R 2 Start searching a station. When a station is received, searching stops. T o stop searching before a station is received, press the same button you have pressed for searching. T o tune in a particular fr equency without sear ching: 1 Select the band (FM or AM).
6 Storing stations in memory Y ou can use one of the following two methods to store broadcasting stations in memory . • Automatic preset of FM stations: SSM (Strong-station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM Y ou can preset 6 local FM stations in each FM band (FM1, FM2, and FM3).
7 ENGLISH Manual preset Y ou can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually . EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band 1 Select the FM1 band. 2 T une into a station of 88.3 MHz. See page 5 to tune into a station.
8 T uning into a pr eset station Y ou can easily tune into a preset station. Remember that you must store stations first. If you have not stored them yet, see pages 6 and 7. KD-S737R/S707R 1 Select the band (FM1, FM2, FM3 or AM) you want. 2 Select the number (1 – 6) for the preset station you want.
9 ENGLISH RDS (Radio Data System) Using RDS functions in the FM band T o select Network-T racking mode, press the RDS button for more than 1 second. • Mode 1 (AF (Alternative Frequencies): on/REG: off): Network-T racking is activated. Switches between stations belonging to the network being received.
10 1 Press the SEL button for more than 2 seconds to enter the preferred setting mode (see page 25). 2 Press the ¢ or 4 button to select the “PTY STBY” mode.
11 ENGLISH • When the PTY button is briefly pressed in the FM mode, the “PTY” indicator is lit during reception of a PTY station and the PTY standby mode is engaged. The selected PTY name stored on page 10 (for example: Classics) flashes for 5 seconds.
12 3 1 Press the SEL button for more than 2 seconds to enter the preferred set- ting mode (see page 25). 2 Select the “PTY SRCH” mode with the ¢ or 4 button. Select the desired PTY with the + or – button (PTYs already stored flash when they are selected), then press the required number button for more than 2 seconds to store it.
13 ENGLISH 1 PTY search operation Press and hold the PTY button for more than 1 second in the FM mode. PTY programme search mode is engaged. PTY 2 Recall a PTY stored on page 12 using a number button (1-6). Ex. When “CLASSICS” is stored in button 1.
14 PTY display No. No. DISPLAY DISPLAY 1 16 WEATHER 2 17 NEWS 3 18 AFFAIRS 4 19 INFO 5 20 SPORT 6 21 EDUCATE 7 22 DRAMA 8 23 CULTURE 9 24 SCIENCE 10 25 VARIED 11 26 POP M 12 27 ROCK M 13 28 EASY M LIG.
15 ENGLISH CT (Clock T ime) When CT data is received in the RDS signal, the time is correctly renewed. • RDS updates the local time according to Greenwich Mean T ime. • When automatic renewal of clock time is NOT required, follow the steps below .
16 Selecting FM reception sound When an FM stereo broadcast is hard to receive: Press MO/RND (Mono/Random) while listening to an FM stereo broadcast. The sound you hear becomes monaural but reception will be improved. T o restore the stereo effect, press the same button again.
17 ENGLISH 1 1 Insert a disc into the loading slot. The unit turns on, draws a CD and starts playback automatically . • When a CD is inserted upside down, “NO DISC” appears on the display and the CD automatically ejects. T o stop play and eject the CD Press 0 .
18 Locating a track or a particular portion on a CD T o fast for ward or r everse the track Press and hold ¢ , while playing a CD, to fast forward the track.
19 ENGLISH RPT Selecting CD playback modes T o play back tracks at random (Random Play) Y ou can play back all tracks on the CD at random. Each time you press MO/RND (Mono/Random) while playing a CD, CD random play mode turns on and off alternatively .
20 SOUND SOUND SOUND ADJUSTMENTS Selecting preset sound modes Y ou can select a preset sound adjustment suitable to the music genre: Each time you press SOUND, the sound mode changes as follows.
21 ENGLISH 1 Select the item you want to adjust. Indication T o do: Range BAS Adjust the bass –6 (min.) — +6 (max.) (Bass) TRE Adjust the treble –6 (min.
22 1 Call up the sound mode you want to adjust. See page 20 for details. 2 Select "BAS", "TRE" or "LOUD". 3 Adjust the bass or treble level or turn the loudness function ON/OFF . See page 21 for details. 4 Press and hold SOUND until the sound mode you have selected in step 1 flashes on the display .
23 ENGLISH 1 Press and hold the button for more than 2 seconds to set the preferred setting mode. (See page 25.) 2 Set the hour . 1. Select “CLOCK H” if not shown on the display . 2. Adjust the hour . Selecting 24-hour or 12-hour clock display (Set to 24-hour at the factory) 1.
24 4 Start the clock. SSM 4 3 T o check the current clock time (changing the display mode) Press DISP repeatedly . Each time you press the button, the display mode changes as follows • If the unit is not in use when you press DISP , the power turns on, the clock time is shown for 5 seconds, then the power turns off.
25 ENGLISH Preferred setting mode control This mode has been set at the factory , but it can be set to suit your needs. Storing y our own mode settings Hour adjustment Minute adjustment 24/12-hour time display Automatic setting of the clock SSM Select.
26 1 Press and hold the button for more than 2 seconds to set the preferred setting mode (see page 25). 2 Select “BEEP” if not shown on the display . 3 T urning on/off the ke y-touch tone This function is ONL Y FOR KD-SX838R. Y ou can deactivate the key-touch tone if you do not want to make it beep when you press a button.
27 ENGLISH How to detach the control panel Before detaching the control panel, be sure to turn off the power . 1 Unlock the control panel. 2 Lift and pull the control panel out of the unit. 3 Put the detached control panel into the provided case (only for KD-SX838R/ S737R).
28 Using the r emote controller 1 Functions the same as the button on the main unit. 2 Select the source. Each time you press FUNC (function), the source changes. 3 Functions as the +/– buttons on the main unit. • Does not function for the preferred setting mode adjustment.
29 ENGLISH 1 1 Select the CD automatic changer . Playback starts from the first track of the first disc. All tracks of all discs are played back. This section is ONL Y FOR KD-SX838R, when used with a JVC CD automatic changer (separately purchased). We recommend that you use one of the CH-X series with your KD-SX838R.
30 T o fast for ward or r everse the track Press and hold ¢ , while playing a CD, to fast forward the track. Press and hold 4 , while playing a CD, to reverse the track. T o go to the next track or the previous track Press ¢ briefly, while playing a CD, to go ahead to the beginning of the next track.
31 ENGLISH T o play back tracks at random (Random Play) Each time you press MO/RND (Mono/Random) while playing a CD, CD random play mode changes as follows: Mode RND Indicator Plays at random RND1 Lights All tracks of the current disc, then the tracks of the next disc, and so on.
32 MAINTENANCE Handling CDs This unit has been designed only to reproduce the CDs bearing the mark. Other discs cannot be played back. How to handle CDs When removing a CD from its case, press down the center holder of the case and lift the CD out, holding it by the edges.
33 ENGLISH What appears to be trouble is not always serious. Check the following points before calling a service centre. Symptoms • CD cannot be played back. • CD sound is sometimes interrupted. • Sound cannot be heard from the speakers. • SSM (Strong-station Sequential Memory) automatic preset does not work.
34 AUDIO AMPLIFIER SECTION FOR KD-SX838R/S737R: Maximum Power Output: Front: 40 watts per channel Rear: 40 watts per channel Continuous Power Output (RMS): Front: 16 watts per channel into 4 Ω , 40 to 20,000 Hz at no more than 0.8% total harmonic distortion.
VICTOR COMPANY OF JAPAN, LIMITED Printed in Singapore 1297MNMUIAJES EN, GE, FR, NL.
デバイスJVC KD-SX838Rの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
JVC KD-SX838Rをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC KD-SX838Rの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC KD-SX838Rの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC KD-SX838Rで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC KD-SX838Rを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC KD-SX838Rの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC KD-SX838Rに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC KD-SX838Rデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
