JVCメーカーMX-D302Tの使用説明書/サービス説明書
ページ先へ移動 of 32
GVT0002-001A [ J ] For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No. INSTRUCTIONS MX-D302T COMP ACT COMPONENT SYSTEM COMP ACT DIGIT AL AUDIO Consists of CA-D302T and SP-D302.
W arnings, Cautions and Others CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
1 Thank you for purchasing the JVC Compact Component System. W e hope it will be a valued addition to your home, giving you years of enjoyment. Be sure to read this instruction manual carefully before operating your new stereo system. Here you will find all the information you need to set up and use the system.
2 T able of Contents Features ...................................................................... 1 How This Manual Is Or ganized ................................. 1 IMPOR T ANT CAUTIONS ....................................... 1 Getting Started ...
3 Getting Star ted Accessories Check that you have all of the following items, which are supplied with the System. AM Loop Antenna (1) Remote Control (1) Batteries (2) FM W ire Antenna (1) If any of these items is missing, contact your dealer immediately .
4 CAUTION: Make all connections before plugging the Unit into an AC power outlet. Connecting the FM Antenna Connecting the AM Antenna Using the Supplied Wire Antenna FM Wire Antenna Extend the supplied FM W ire Antenna horizontally . Using an FM 75-Ohm Antenna Cable (not supplied) If reception is poor , connect the outside antenna.
5 CAUTION: Make all connections before plugging the Unit into an AC power outlet. Connecting the Speakers For each speaker , connect one end of the speaker wire to the speaker terminals on the back of the System. 1. Open each of the terminals and insert the speaker wires firmly , then close the terminals.
6 COMPU PLA Y COMPU PLA Y is JVC’ s feature that lets you control the most frequently used functions of the System with a single touch. One T ouch Operation starts playing a CD, turns on the radio, plays a tape, etc. with a single press of the play button for that function.
7 Common Operations DISC DISC DISC REPEAT RANDOM CONTINUE SOUND MODE ACTIVE BASS EX. VOLUME POWER ST ANDBY indicator AUX PHONES kHz MHz CONT. ALL PRGM REC A.BASS EX S.MODE SLEEP MONO ST CLOCK RANDOM Display ACTIVE BASS EX. indicator SOUND MODE indicator Source, Sound Mode V olume level etc.
8 Adjusting the V olume Turn the VOLUME control clockwise to increase the volume or anticlockwise to decrease it. Turning the VOLUME control quickly also adjusts the volume level quickly . When using the Remote Control, press the VOLUME + button to increase the volume or press the VOLUME – button to decrease it.
9 Listening to Auxiliary Equipment By playing the sound from auxiliary equipment through the System, you can gain control over how the music or program sounds. Once the connected equipment is playing through the System, you can apply the sound effects.
10 Using the T uner Y ou can listen to both FM and AM stations. Stations can be tuned in manually , automatically , or from preset memory storage. o Before listening to the radio: • Check that both the FM and AM antennas are firmly connected. (See page 4).
11 Three W ays to Select a Station —————————————— o Press the TUNING DOWN or TUNING UP on the MUL TI CONTROL repeatedly to move from frequency to frequency until you find the one you want.
12 Using the CD Player DISC DISC DISC REPEAT RANDOM CONTINUE REPEA T RANDOM CONTINUE 7 STOP CD £ / 8 When CD is selected as the source, the button lights up.
13 The Quickest W ay to Start a CD Is with the One T ouch Operation ————————————————————————— Press the CD £ / 8 button (or the £ / 8 button on the Remote Control).
14 Basics of Using the CD Player — Nor mal Play Playing a Disc ——————————————————————— 1. Pr epare the discs. 2. Pr ess the CD £ / 8 or DISC button (1-3) of the disc you want to play . When using the Remote Control, press the £ / 8 button or the DISC button (1 to 3).
15 PLAY MODE PRGM A.BASS EX S.MODE PRGM A.BASS EX S.MODE T rack number Disc number Step number CONTINUE PLAY MODE CONT. A.BASS EX S.MODE Continuous Play This function plays the discs in the Unit continuously . 1. Prepar e the discs. 2. Select Continuous mode.
16 3. Pr ess the number keys (1 to 10 and +10) to select the track to program. • Example: for track 5, press 5. For track 15, press +10 then 5. For track 20, press +10 then 10. 4. Repeat steps 1 to 3 to select the other tracks for the pr ogram. 5. Pr ess the £ / 8 button.
17 Repeating a Selection or the Discs Y ou can have all the discs, the program or the individual selection currently playing repeat as many times as you like. Press the REPEA T button. Each time you press the button, the Repeat Modes changes as follows.
18 Using the Cassette Deck (Listening to a T ape) DISC DISC DISC REPEAT RANDOM CONTINUE MUL TI CONTROL 7 STOP T APE ™£ When T APE is selected as the source, the button lights up. REVERSE MODE DECK A/B 0 Eject (Deck B) 0 Eject (Deck A) 1 23 456 7 8 9 ACTIVE BASS EX.
19 3. Close the holder gently . When both Deck A and Deck B contain a tape, the last deck to have a tape inserted is selected. T o change the selected deck, press the DECK A/B button. When using the Remote Control, press the A or B button. 4. Press the T APE ™£ button (or ™ or £ button on the Remote Control).
20 Using the Cassette Deck (Recor ding) DISC DISC DISC REPEAT RANDOM CONTINUE CD REC ST ART REC ST ART/STOP DUBBING 1 23 456 7 8 9 ACTIVE BASS EX. REC PAUSE 10 10 FM/AM A B DISC FM MODE PLAY MODE 7.
21 CAUTION: If recordings you have made have excessive noise or static, the Unit may be too close to a TV which was on during the recording. Either turn off the TV or increase the distance between the TV and the System. Standar d Recording This is the basic method for recording any source.
22 Recording AM Station to T ape ——————————————— When recording an AM broadcast, beats may be produced which are not heard when listening to the broadcast. In this case, press the CONTINUE button on the CD Player to eliminate the beats.
23 Using the Timer The timers let you control listening and recording functions automatically . Use the Remote Control to set the clock and timers. Setting the Clock The timers depend on the clock: the clock must be right for the timers to work as you expect.
24 Setting the Timer o Y ou can set the Timer whether the Unit is on or of f. Procedur e For Setting the Timer 1. Pr ess the SHIFT button. 2. Pr ess the 2 TIMER button. The T imer indicator on the display lights up and the blinking “TIMER ON” changes to the On-T ime setting display .
25 8. Press the 8 SET button. The volume level blinks on the display . 9. Press the SELECT 5 + or 4 – button to set the volume level. 10. Press the 8 SET button. The display returns to the display before you set the timer . Before T ur ning the Unit Off • Check that the selected source is ready .
26 Car e And Maintenance Compact Discs Handle your compact discs, cassette tapes, and Cassette Deck carefully , and they will last a long time. • Remove the CD from the case by holding it at the edges while pressing the centre hole lightly . • Do not touch the shiny surface of the CD, or bend the CD.
27 • If you are having a problem with your System, check this list for a possible solution before calling for service. • If you cannot solve the problem from the hints given here, or the Unit has been physically damaged, call a qualified person, such as your dealer , for service.
28 Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and production of the wide array of JVC products, service is the key to maintaining the high level of performance for which JVC is world famous.
29 LIMITED W ARRANTY A UDIO-1 JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP from the date of original retail purchase for the period as shown below.
30 Specifications Amplifier Section Output Power 55 watts per channel, min. RMS at 6 ohms at 1 kHz, with no more than 3% total harmonic distortion. Input Sensitivity/Impedance (1 kHz) AUX 300 mV/50 ko.
デバイスJVC MX-D302Tの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
JVC MX-D302Tをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC MX-D302Tの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC MX-D302Tの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC MX-D302Tで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC MX-D302Tを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC MX-D302Tの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC MX-D302Tに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC MX-D302Tデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
