JVCメーカーMX-K350Vの使用説明書/サービス説明書
ページ先へ移動 of 36
For Customer Use: Enter below th e Model No . and Serial No . which are located eithe r on the rear , bot - tom or side of the cabinet. Retain thi s inf ormation for futur e ref erence.
G-1 W arnings, Cautions and Other s CA U TION T o red uce the risk of electrical shocks, fire, etc.: 1. Do not remov e screws, co vers or cabinet. 2. Do not expose this appliance to r ain or moisture. Caution –– switch! Disconnect the mains plug to shut the power off completely .
G-2 Caution: Proper V entilation T o avoid risk of electric shock and fire, and to prev ent damage, locate the appar atus as follo ws: 1 F ront: No obstructions and open spacing. 2 Sides/ T op/ Back: No obstructions should be placed in the areas shown by the dimensions below .
1 English Introduction Thank you for purchasing the JVC Co mpact Component System. We hope it will be a valued addition to your h ome, giving you years of enjoyment. Be sure to read this instruction manual carefully before operating your new stereo system.
2 English Table of Contents Introduction ................................................... ........................................... ..................... 1 Features .......... ............... ........... .............. .............. ........... .
3 English Getting Started Accessories Make sure that you have all of the following items, which are supplied with the System. AM Loop Antenna (1) Remote Control (1) Batteries (2) FM Wire Antenna (1) Video Cord (1) AC Plug Adaptor (1) If any of these items are missing, contact your dealer immediately.
4 Getting Started English Using the Remote Control The Remote Control makes it easy to use many of the functions of the System from a distance of up to 7m away. You need to po int the Remote Control at the remote sensor on the System ’ s fron panel.
5 Getting Started English Connecting the AM Antenna Rear Panel of the Unit • Even when connecting an outside AM antenna, keep the indoor AM loop connected. CAUTION: • To avoid noise, ke ep antennas away fro m the System, th e connecting cord and t he AC power cord.
6 Getting Started English Connecting a TV Connect a video cord (supplied) between the System ’ s VIDEO OUT terminal and the video input jack of you r TV. • Do not connect a cable between the LINE-OUT terminals and the audio input termin als of an external TV.
7 English Basic Operations ) Turning the Power On and Off Turning the System On 1 Press the % STANDBY/ON button. The display comes on and “ WELCOME ” is displayed once. The STANDBY indicator goes out. The System comes on ready to continue in the mode it was in when the power was last turned off.
8 Basic Operations English Fade-out Muting (FADE MUTING) You can mute the output with one touch operation. To muting the output , press the FADE MUTING button on the Remote Control. The output is faded out. To release muti ng , press the FADE MUTING button once again.
9 English Using the Tuner You can listen to FM and AM stations. Stations can be tuned in manually, automatically, or from preset memory storage. ❏ Before listening to the radio: • Make sure that both the FM and AM antennas are correctly connected.
10 Using the Tuner English 2 Select a station using one of the foll owing methods. • Manual Tuning Briefly press the 22 or ¡ button on the Unit to move from frequency to frequency until you find the station you want.
11 English Using the CD Player (Digital Audio CDs, MP3 Discs) The CD Player h as the rotational disc tray that c an accommodate 3 CDs. The unit can play back the following types of disc: Digital Audio CD, MP3 disc, CD-R, CD-RW. You can use Normal, Program, Random, or Repeat Play.
12 Using the CD Player (Digital Audio CDs, MP3 Discs) English Example of indication: One Touch Play The power comes on, and operations are done automatically. ❏ By pressing the CD 6 button, the System will come on, and if a CD is loaded for the di sc number that wa s lastly selecte d, it will start playing from the first track.
13 Using the CD Player (Digital Audio CDs, MP3 Discs) English Basics of Using the CD Player- Normal Play To Play CDs 1 Load CDs. 2 Press one of the Disc button (CD1-CD3) you want to play. The selected disc number (e.g. “ CD-1 ” ) appears on the dis- play.
14 Using the CD Player (Digital Audio CDs, MP3 Discs) English 3 Press one of the Disc butto n (CD1-CD3) to select the CD you want to program. The display will change to the Program Entry display.
15 Using the CD Player (Digital Audio CDs, MP3 Discs) English Repeating Tracks You can repeat all tracks or individual track, as many times as you like. Press the REPEAT button. The Repeat indicator changes with each press of the button, as fol- lows: ALL = 1CD = 1 = Blank display = (b ack to the beginning) To stop playing , press the 7 button.
16 English Using the Video CD Player (Video CDs) You can play video CDs (with or without the Playback Control (PBC) function) to watch the picture on your TV while listening to the sound on video CDs. SVCDs and DVDs cannot be used. ❏ Before playing video CDs • Make sure that the connection between the System and your TV is corr ect.
17 Using the Video CD Player (Video CDs) English Playing Video CDs with PBC Function (VCD 2.0) The System provides a Playback Control (PBC) function which utilizes a procedure (menu selection) pro grammed in a video CD. What is the Playback Control (PBC) function? The PBC function allows you to enjoy the following features.
18 Using the Video CD Player (Video CDs) English A selection menu is displayed when you start playing a video CD with the PBC function. The selection menu shows a list of numbers for selection. Some video CDs may show moving pictures or a di- vided screen.
19 Using the Video CD Player (Video CDs) English Display the Time You can view the playing or remain time on the TV screen. Press the ON SCREEN button on the Remote Control. Each time you press the button. The on-screen display mode is changed as follows: • Does not show the remaining time in the case of playing VCD with PBC or playing MP3 discs.
20 English Using the Cassette Deck (Listening to a Tape) The Cassette Deck allows you to play, record, and dub audio tapes. ❏ Listening to typ e I tape is suita ble for this Casse tte Deck. One Touch Play By pressing the TAPE 3 button, the System will come on, and if a tape is in t he deck, it will start to play.
21 English Using the Cassette Deck (Recording) Recording onto a cassette from any of the sound sources is simple. Just place a tape in Deck B, have the source ready, make one or two settings, and you ’ re ready to r ecord. For each sour ce, the pro- cedure is a little bit different so we explain each separately.
22 Using the Cassette Deck (Recording) English Standard Recording This is the basic method for recording any source. The System also has special ways for recording CD to tape, and ta pe to tape, which save you time and effort, as well as give you some special effects.
23 English Using an External Equipment Listening to the External Equipment You can listen to the external equipment such as MD recorder, cas- sette deck, or other auxiliary. ❏ First, make sure that the external equipment is properly connect- ed to the Syst em.
24 English Using the Timers The timers lets you control recording and listening functions auto- matically . Three types of timers are available : DAILY Timer Use this timer to set wake up everyday to music from any source, instead of an alarm clock. REC (Recording) Timer Unattended recording of radio broadcasts.
25 Using the Timers English Setting the Daily Timer Once you have set the Daily Timer, the timer will be activated at the same time every day. The Timer indicator ( ) on the display shows that the Daily Tim- er you have set is in effect. You can set the Daily Timer whether the System is turned on or off.
26 Using the Timers English Preparation for each music source: Perform the following operation according to the music source you have selected. Then, the System enters Volume Setting mode. When selecting TUNER FM or TUNER AM: Press the 4 or ¢ button to sele ct the preset stati on number, then press the SET button.
27 Using the Timers English Using the Uni t You can set the time in the same way as for set ting the Daily Tim- er. 1 Insert a blank or eras able tape into the Deck B and wind past the tape le ader. 2 Press the CLOCK/TIMER button until “ON TIME” immediately after “REC” appears on the display.
28 Using the Timers English Setting the SLEEP Timer Use the Sleep Timer to turn the System off af ter a certain numbe r of minutes when it is playing. By setting the Sleep Timer, you can fall asleep to music and know that your System will turn off by it- self rather than play all n ight.
29 English Using the Microphone By attaching a microphone (not supplied) to the MIC jack, you can use the System for Karaoke or microphone mixing. You can also add an echo to the microphone ’ s sound. CAUTION: • Always set the MIC LEVEL control on the Unit t o MIN when connection o r disconnecting t he mi- crophone.
30 Using the Micropho ne English To Apply Digital Echo Press the ECHO button on the Remote Control. The Echo indicator ( ) comes on. To cancel the ECHO, press the ECHO button again. The Echo indicator goes off. • To prevent howling and squealing (fee dback) when using the microphone, adjust the volume properly.
31 English Care And Maintenance Handle your CDs and tapes carefully, and they will last a long time. Compact Discs CAUTION: • Do not use any solvent (for example, conv en- tional record cleaner, spray thinner, benzine, etc.) to clean a CD. General Notes In general, you will have the best performance by keeping your CDs and the mechanism clea n.
32 English Troubleshooting • If you are having a problem with your System, check this list for a possible solution before calling for service. • If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as your dealer, for service.
Mains (A C) Line Instruction (not applicab le f or Eur ope, U .S.A., Canada, A ustralia, and U. K .) IMPORT ANT for mains (A C) line BEFORE PLUGGING IN, do check that your mains (A C) line v oltage co.
デバイスJVC MX-K350Vの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
JVC MX-K350Vをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC MX-K350Vの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC MX-K350Vの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC MX-K350Vで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC MX-K350Vを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC MX-K350Vの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC MX-K350Vに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC MX-K350Vデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。