JVCメーカーRX-EXA10の使用説明書/サービス説明書
ページ先へ移動 of 56
COMP A CT COMPONENT SYSTEM EX-A10 Consists of RX-EXA10, SP-EXA10 and XV -EXA10 L VT1403-011 A [A, US, UN, UB , UW , UG] INSTR UCTIONS English EXA10[A_Ux]-00Cov1.
G-1 IMPORTANT FOR LASER PRODUCTS CAUTION T o reduce the risk of electrica l shocks , fire, etc.: 1. Do not remov e screws, co v ers or cabinet. 2. Do not expose this appliance to rain o r moisture. CAUTION — F button! Disconnect the mains plu g to shut the power off completely (the ST ANDBY lamp goes off).
G-2 CAUTION — Proper Ventilation T o a void risk of electric shock and fire and to pr otect from damage, locate the apparatus as follo ws: T op/F ront/Back/Sides: No obstructions should be placed in the areas shown b y the dimensions below . Bottom: Place on the lev el su rf ace.
1 Introduction Supplied accessories ...................................... 2 Part description ............................................... 3 DVD player ....................... ........... ............. .......... 3 Receiver.. ............. ........
2 Intr oduction Listening to the sound of other audio equipment Listening to the sound of other audio equipment ................................................... 41 Timer Timer ............................................................. 42 Using the sleep timer .
3 The numbers ref er to the pages in which the par ts are explained. Front p anel Rear panel Displa y window The receiver and the D VD play er use the same design for their displa y windows.
4 Intr oduction The numbers ref er to the pages in which the par ts are explained. Front p anel * This terminal is fo r connecting a pai r of headphones equipped with a s tereo plug (not supplied). When t he headphones ar e connected, th e speak ers do not produc e any so und.
5 The numbers ref er to the pages in which the parts are e xplained. If the eff ective distance bet ween the remote control and remote control sensor on the receiver or the D VD play er decreases, replace the batteries. Use two R6P (SUM-3)/AA(15F) type dry-cell batter ies.
6 Intr oduction Y o u can operate your TV using the remote control of this system. Setting the manufacturer code 1 Slide the remote control mode selector to TV. 2 Hold down F TV. • Hold down F TV until you finish step 4. 3 Press ENTER and release. 4 Press number buttons (1-9, 0).
7 Connecting the AM loop antenna (supplied) 3 Turn the AM loop antenna to find the best position for radio reception. Place the AM loop antenna as far from the receiver as possible. • Do not place the AM loop antenna on a metallic table or close to a TV , computer , or other electric appliances.
8 Preparation Connecting the FM antenna (supplied) 7 When radio reception with th e supplied FM antenna is poor, or when usin g a communal antenna When using a n antenna oth er than tho se suppli ed with this system, refer to the operation man uals fo r the antenna and conver ter for details of connection .
9 There is no difference between the left and right speakers. CAUTION • Do not short-circui t the ª and · speaker terminals. Doing so ma y damage the receiver . • Do not connect other speakers toge ther with the supplied speake rs. The change in i mpedance may damage the re ceiver and the spea kers.
10 Preparation Make sure to connect the three supplied cords. CAUTION • Do not fold the op tical digital cord as thi s may damage the inner w ire. Connecting the r eceiv er and the DVD player DVD pl.
11 Connecting the subwoofer When you connect this system with an amplifier- built-in subwoof er (not suppl ied), you can enjo y a more dynamic bass sound. Refer to the manual of the subw oof er f or detail s. T o produce sound from the subwoof er , pr ess S.
12 Preparation Connecting other audio equipment Connecting digital equipment with an optical output terminal Connecting a TV with the VIDEO terminal Connecting a TV with the S-VIDEO terminal Connectin.
13 F or the locations of the remot e control b uttons, ref er to page 11. Do not tur n on the power until you complete the connection . Connections (continued) After connecting the D VD pla yer to the TV , select the video signal type corre ctly according to the TV .
14 Preparation/Basic operations • 1 Slide the remote control mode selector to RECEIVER. 2 Press F AUDIO (or F on the receiver). • The power of the receiv er will turn on and the ST ANDBY lamp on the receiver will turn off . • Press F A UDIO again to tur n off the power of the receiver .
15 Y ou ca n set the clock when the receiv er is turn ed either on or off. Example: T o set the cloc k to 10:30 a.m. on W ednesday 1 Slide the remote control mode selector to RECEIVER. 2 Press CLOCK/TIMER. Display on the receiver 3 Press 2 or 3 (cursor) to select the hour.
16 Basic operations Changing the brightness of the display windows on the receiver and the DVD player Y ou ca n set the brightness of the displa y windows on the receiver and the D VD play er respectively . 7 When the receiver/DVD player is turned on 1 Slide the remote control mode selector to RECEIVER or DVD.
17 1 Slide the remote control mode selector to RECEIVER. 2 Press BASS ADJUST. Display on the receiver 3 While the select able values are flashing, press 2 or 3 (cursor) to select the value of the bass frequency. • Y ou can select “10 0 Hz”, “120 Hz” or “140 Hz”.
18 Basic operations/Listening to radio Some countr ies space AM stations 9 kHz apar t, and other countr ies use 10 kHz spacing. On the receiver ONL Y : 7 When the receiver is turned off T o select 10 kHz spacing, while holding down SEARCH + on the receiver , press F on the receiv er to turn on the pow er .
19 Presetting radio stations in the receiver allows y ou to easily tune in to a radio station. Presetting radio stations Y o u can store up to 30 FM radio stations and up to 15 AM radio stations. 1 Select a radio station you want to store ( A “Selecting a radio station” on page 18).
20 Listening to radio/ Playing bac k D VDs/CDs Remote control mode selector SLOW / ¡ SLOW / 1 Playing back DVDs/CDs Basic operations of the DVD player 1 Slide the remote control mode selector to DVD. 2 Press 0 OPEN/CLOSE. • The disc tray ejects. 3 Place a disc.
21 This par t explains the operation with displa ys of an MP3 disc as examples . F or a JPEG disc, read “track” as “file” . NOTE • When files of different types are reco rded on a disc, select the f ile type to be played back. ( A “FILE TYPE ” on pa ge 39) 1 Slide the remote control mode selector to DVD.
22 Play ing back DV D s / C D s ■ VCD/SVCD When a disc is played back • PBC (Play Back Control) is a signal recorded in a VCD (version 2.0) f or controlling playbac k. Y ou can enjoy interactiv e software or softw are with a search function using a menu screen recorded in a PBC compatible VCD .
23 1 Slide the remote control mode selector to RECEIVER. 2 Press DISPLAY repeatedly. • Each time you press DISPLA Y , the display toggles betwee n the curre nt source (D VD , FM, AM, A UX-DIGIT AL or A UX) and the clock. 1 Slide the remote control mode selector to DVD.
24 Pla ying back DV D s / C D s 7 When a disc is played back 1 Slide the remote control mode selector to DVD. 2 Press 8 . • T o return to nor mal playbac k, press 3 (pla y). 7 When a disc is paused 1 Slide the remote control mode selector to DVD. 2 Press 8 repeatedly.
25 7 When a disc is played back 1 Slide the remote control mode selector to DVD. 2 Press ONE TOUCH REPLAY. NOTE • This operation may not be used for some discs. • You cannot go back to the previous title. 7 When a disc is paused 1 Slide the remote control mode selector to DVD.
26 Play ing back D VDs/CDs Y ou can skip within a file at about 5 minute intervals . This is useful especially when you wa nt to skip within a long file. 7 When a disc is played back 1 Slide the remote control mode selector to DVD. 2 Press 2 or 3 (cursor).
27 7 When a disc is stopped or played back 1 Slide the remote control mode selector to DVD. 2 Press MENU/PL or TOP MENU/ PG. • The menu screen will be display ed. •O n l y T OP MENU/PG can be used for D VD AU D I O s . 3 Press 5 / / / 2 / 3 (cursor) (only for a DVD VIDEO or DVD AUDIO) or the number buttons to select the desired track.
28 Play ing back D VDs/CDs Y ou ca n lock the disc tra y to pre vent the disc from being ejected. Setting Turn off the DVD player. And while holding down 7 on the DVD player, press 0 on the DVD player. • “LOCKED” appears in the display windo w on the D VD play er .
29 3 Press the number buttons to program chapters/tracks. • Ref er to “Using the number buttons” ( A page 15). ■ Displa y on the D VD play er for D VD VIDEO • Select a title number , and then a chapter number . ■ Display on the D VD pla yer f or D VD AUDIO/ MP3/WMA disc • Select a group number , and then a track number .
30 Pla ying back D VDs/CDs 7 When a disc is stopped 1 Slide the remote control mode selector to DVD. 2 Press PLAY MODE repeatedly to display “RANDOM” in the display window on the DVD player. • “RANDOM” will also be d isplay ed on the TV screen.
31 Y o u can play bac k the desired par t repeatedl y by specifying a star t point (A) and an end point (B). 7 When a disc is played back 1 Slide the remote control mode selector to DVD. 2 Press ON SCREEN twice. • The men u bar ( A page 36) will be display ed.
32 Play ing back D VDs/CDs This par t explains the operation with displa ys of a D VD VIDEO as examples . Y ou can use discs of other types in almost the same manner. 7 When a disc contains subtitles an d is played back 1 Slide the remote control mode selector to DVD.
33 7 When a scene contai ning multi-view angl es is played back 1 Slide the remote control mode selector to DVD. 2 Press ANGLE. • Each time you press the b utton, the angle will be changed. Also, the angle can be changed by pressing 5 / / (cursor). 3 Press ENTER.
34 Play ing back D VDs/CDs 7 When a disc is played back or paused 1 Slide the remote control mode selector to DVD. 2 Press VFP. • The current setting will appear on the TV screen. • The “GAMMA” setting adjusts the brightness of neutral tints while maintaining the brightness of dar k and bright por tions.
35 Some D VD A UDIOs may ha v e pictures call ed B.S .P . (Browsab le Still Pictures). The pictu res can be viewed as if you are turni ng pages. NOTE • You can use this function when “B.S.P.” lights up in the display window on the DVD player. 7 When a disc is played back 1 Slide the remote control mode selector to DVD.
36 Pla ying back D VDs/CDs 7 When a disc is played back 1 Slide the remote control mode selector to DVD. 2 Press ON SCREEN twice. • “ON SCREEN” will appear in the display window on the D VD player . The status bar and the menu bar will appear on the TV screen.
37 Convenient functions of t he DVD player (continued) Function list F or functions with no descrip tion of the operation, press 5 / / (cursor) to select and press ENTER to deter mine the functi on. Designating the time (Time search) 7 When a disc is played back 1 Slide the remote control mode selector to DVD.
38 Play ing back D VDs/CDs The initial settings of the D VD play er can be changed with the preference screen according to the environment where the D VD play er is used . NOTE • The top and bottom of the preference screen may not be displayed on a wide TV.
39 PICTURE * When using t he supplied XV - EXA10, make sure that “DIGIT AL A UDIO OUTPUT” is set to “PC M ONL Y” . PICTURE Items Contents ( : initial setting) MONIT OR TYPE 16 : 9/16 : 9 MUL TI: For an ordinary wide TV . / 4 : 3 MUL TI LB (Letterbo x) : For a TV with con ventiona l 4:3 aspect rat io .
40 Play ing back D VDs/CDs List of relationships of DIGIT AL AUDIO OUTPUT preference items and output signal NOTE * Copyright -protected DVD AUDIOs do not outpu t signals. • Among DVD VIDEOs without copyright protection, there may be some DVD VIDEOs that output a 20 or 24 bit signal through the digital aud io output t erminals.
41 Connect the other audio equipment to this system in advance ( A page 12). 1 Slide the remote control mode selector to RECEIVER. 2 Press AUX to select “AUX-DIGITAL” or “AUX”. • Each time you press AU X , the display on the receiver toggles between “A UX-DIGIT AL ” and “A UX”.
42 Listening to the sound of other audio equipment/Timer When the time you specif y elapses , the system will be tur ned off automatically . 1 Slide the remote control mode selector to RECEIVER. 2 Press SLEEP. • Each time you press the button, the time indicated in the display window on the receiver changes (in minutes).
43 Set the clock bef orehand. ( A page 15) 1 Slide the remote control mode selector to RECEIVER. 2 Press CLOCK/TIMER. Display on the receiver • If you a ccidental ly pressed CLOCK/TIMER twice or more, press CLOCK/TIMER repeatedly until the display shown above is displayed.
44 Timer 9 Press F AUDIO to turn off the receiver. • The playbac k timer is availab le only when the receiver is off . NOTE • Complete the playback timer setting at least 1 minute prior to the starti ng time you have selected in step 4.
45 When a JVC-manuf a ctured TV with A V COMPU LINK II or III ter minals is connected to the D VD play er using these ter minals, operating ei ther the TV or the D VD play er cont rols the other equi pment at the same time. NOTE • “AV COMPU LINK” is printed for terminals on some JVC-manufactured TVs.
46 Reference 7 Important cautions Installation of the system • Select a place which is lev el, dry and neither too hot nor too cold; between 5°C and 35°C. • Leav e sufficient distance between the system and the TV . • Do not use the system in a place subject to vibration.
47 • Discs should be finalized before being pla yed bac k. 1 A D VD-R recorded in multi-border format is also play able (except f or dual layer discs). 2 O nly when a D VD-R is compatible with CPRM (Content Protection for Recordab le Media), D VD VR format can be used.
48 Reference Discs that cannot be played back • The follo wing discs cannot be pla yed bac k: D VD-ROM (e xcept f or MP3/WMA/JPEG/ASF/DivX/ MPEG1/MPEG2 format), D VD-RAM, CD-ROM, CD-I (CD-I Ready), Photo CD , SACD , etc. Play ing back these discs will generate noise and damage the speakers.
49 DVD VIDEO/DVD VR A D VD VIDEO consists of “titles” and each titl e may be divided into “chapters”. A D VD VR consists of “original programs” or “play lists” and each origina l program/pla y list may be divided into “chapters”. .
50 Reference When you encounter a problem that seems to be a fault, check the f o llowing points bef ore contacting the JVC ser vice center : Power source 7 Power does not come on. • The power cord of the receiver or the D VD play er is not connected to an A C outlet.
51 Other 7 You cannot switch audio or subtitles between languages. • The disc does not contain multiple languages. → If only a single lang uage is recorded on the disc, you cannot sw itch the current language to another language . ( A page 32) 7 No subtitle is displayed.
52 Reference Receiver (RX-EXA10) T uner FM frequency: 87.50 MHz - 108.00 MHz AM frequency: 531 kHz – 1 710 kHz (9 kH z spacing) 530 kHz – 1 710 kHz (10 kHz spacing) Amplifier Output po wer (T weet.
2005 Victor Company of Japan, Limited EN 1005SKMMODJEM EX-A10 COMPACT T COMPONENT SYSTEM c EXA10[A_Ux].book Page 42 Tuesday, August 30, 2005 3:53 PM.
デバイスJVC RX-EXA10の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
JVC RX-EXA10をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC RX-EXA10の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC RX-EXA10の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC RX-EXA10で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC RX-EXA10を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC RX-EXA10の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC RX-EXA10に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC RX-EXA10デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
