JVCメーカーTH-M606/TH-M603の使用説明書/サービス説明書
ページ先へ移動 of 52
TH-M606/TH-M603 TH-M303/TH-M301 For Customer Use: Enter below the Model No . and Serial No . which are located either on the rear , bottom or side of the cabinet.
G-1 W arnings, Cautions and Others IMPORTANT FO R LASER PROD UCTS 1. CLASS 1 LASER PR ODUCT 2. CA UTION : Do not open the top cover . There are no user serviceable pa rts inside the unit; l eav e all servicin g to qualif ied service personnel. 3. CA UTION : V isible and in visible laser radiation when open and interlock failed or defeated.
Warnings, Cautions and Others G-2 For Canada CA UTION : TO PREVENT ELECTRIC SHOCK, MA TCH WIDE BLADE OF PLUG TO WIDE SLO T , FULL Y INSER T . For Canada THIS DIGIT AL APP ARA TUS DOES NO T EXCEED THE .
1 T able of contents Introduction ..................................... 2 Notes on handling ............. ............... .............. ................. ......2 Supplied accessories ............................................................2 About discs .
2 Introduction 7 Important cautions Installation of the system • Select a place which is le vel, dry and neither too hot nor too cold; between 5°C and 35°C (41°F and 95°F). • Leav e suff icient distance between the system and the TV . • Do not use the system in a place subject to vibration.
3 About discs This system has been designed to play back the following discs: D VD VIDEO, D VD A UDIO, V ideo CD (VCD), Super V ideo CD (SVCD), Audio CD (CD), CD-R and CD-R W . • This syste m accommodates th e NTSC system, and also ca n play discs recorded with P AL system.
About discs 4 Notes on MP3/WMA/JPEG /MPEG4 discs • MP3/WMA/JPEG/ MPEG4 discs (either CD-R or CD-R W) require a longer readout time. (It dif fers due to the complexity of the directory/file configuratio n.) • When making an MP3/WMA/JPEG /MPEG4 dis c, select ISO 9660 Lev el 1 or Level 2 for the disc format.
5 Description of parts and controls The illustrations of the center unit and the subwoofer used in this manual are of TH-M606 unless otherwise noted. Front panel (center unit) Rear panel (center unit) Display window pg. 24 pg. 26 pg. 43 pg. 23 pg. 27 pg.
Description of parts and controls 6 Powered subwoofer SP-PWM606/SP-PWM505/SP-PWM501 SP-PWM603/SP-PWM303/SP-PWM301 * Do not block the ventilation openings. NOTE • For safety reasons, always ensure that there is sufficient space behind the powered subwoofer.
Description of parts and controls 7 Remote control Putting batteries in the remote control If the range or effecti veness of the remote control decreases, replace both batteries. CAUTION • Do not expose batteries to heat or flame. Operating the system from the remote control Aim the remote control directly to the front panel of the center unit.
8 Connections 7 AM loop antenna Setting up sup plied AM loop antenn a Connecting AM l oop antenna • T urn the loop antenna until you ha ve the best reception during AM broadcast program reception. NOTE • Make sure the antenna conductors do not touch any other terminals, connecting cords and power cords.
Connections 9 The following procedur e explains the front speaker assemb ly . The assembly of both the front and surround speakers ar e done in the same manner . NOTE • The stands and the base plates are commonly used for both front and surround speakers assembly.
Connections 10 CAUTION • When you connect speakers other than the supplied ones, use speakers with the same speaker impedance (SPEAKER IMPED ANCE) indicated near the speaker terminals on the rear of the po wered subwoofer . • DO NOT connect more than one speaker to one speaker terminal.
Connections 11 CAUTION • When you connect speakers other than the supplied ones, use speakers with the same speaker impedance (SPEAKER IMPED ANCE) indicated near the speaker terminals on the rear of the po wered subwoofer . • DO NOT connect more than one speaker to one speaker terminal.
Connections 12 Note that the illustration below is for TH-M505. CAUTION • When you connect speakers other than the supplied ones, use speakers of the same speaker impedance (SPEAKER IMPED ANCE) indicated near the speaker terminals on the rear of the po wered subwoofer .
Connections 13 CAUTION • When you connect speakers other than the supplied ones, use speakers of the same speaker impedance (SPEAKER IMPED ANCE) indicated near the speaker terminals on the rear of the po wered subwoofer . • DO NOT connect more than one speaker to one speaker terminal.
Connections 14 NOTE • Although the satellite speakers and the powered subwoofer are magnetically shielded, the TV screen may appear mottled. In this case, keep enough distanc e between the speakers and the TV. • T he speakers are magnetically shielded to avoid color distortions on TVs.
Connections 15 NOTE • The way of connecting the system cord varies depending on the type of the powered subwoofer. Y ou can enjoy the sound of an analog component. NOTE • T he signals input to the VIDEO jack of the VCR IN jacks will be output only from the VIDEO jack of the VIDEO OUT jacks, not from the S-VIDEO jack of the VIDEO OUT jacks.
16 Operating external components with the remote control NOTE • Manufacturers’ codes are subject to change without notice. • Set the codes again after replacing the batteries of the remote control. 7 To set the manufact urer’s code Y ou can operate a JVC TV without setting the manufacturer’ s code.
Operating external components with the remote control 17 5 Press number buttons (1 -9, 0) to enter the manufacturer’s code (2 digits). Examples: For a GI Jerrold product: Press 0 , the n 1 . For a Son y product: Press 2 , the n 0 . 6 Release F VCR/DBS.
18 Basic operations IMPORTANT Before using the remote control for the following operation; • Set the remote control mode sele ctor to A UDIO . On the remote control: Press F AUDIO. On the center unit: Press F . When D VD is selected as t he source ( A pg.
Basic operations 19 On the remote contro l: Press one of the source selecting buttons (DVD, FM/AM, VCR or DBS). DV D : T o play back a disc (DVD VIDEO, VCD etc.). ( A pg. 22) FM/AM : T o tune in an FM or AM station. ( A pg. 42) Each time you press the butt on, the band alternates between FM and AM.
Basic operations 20 The system turns of f automatically when the specified period of time has passed. Press SLEEP. Each time you press the button, the shut-of f time changes. Example: To check the remaining time Press SLEEP once. To change the remaining time Press SLEEP r e peatedly .
Basic operations 21 NOTE • When you change the positioning of the speakers or listener, or replace the supplied speakers with other ones, perform Smart Surround Setup again. 7 While DVD is selected as the source and stopped 1 Take your position where you listen to the sound.
22 Playback • The icon such as shows the types of discs the operation is av ailable for . IMPORTANT Before using the remote control for the followi ng operation; 1 Set the remote control mode se lector to A UDIO . 2P r e s s DV D . 1 Press the desired DISC (1-5) 0 on the center unit.
Playback 23 NOTE • Up to 5 discs can be loaded. • You can also start playback by pressing 3 (play button) or DVD . • The system plays back available discs sequentially until you stop playback or until the disc loaded on the DISC 5 tray reaches to th e end.
Playback 24 7 Disc information on the display window The disc indicators on the display windo w show the current status of the corresponding disc tray . Example: When the discs are loaded to disc trays 1, 2 and 5, and the disc in the disc tray 5 is selected.
Playback 25 7 Using number buttons on the rem ote control 7 For DVD VIDEO (title, chapter): While stopped, the title number is selected. During playback, the chapter number is selected.
26 Advanced operations • The icon such as shows the types of discs the operation is av ailable for . IMPORTANT Before using the remote control for the following operation; 1 Set the remote control mode se lector to A UDIO . 2P r e s s DV D . • There are exceptions in th e operation mentioned abov e.
Advanced operations 27 7 All Channel Stereo (DSP) All Channel Stereo (ALL CH ST .) mode can reproduce a larger stereo sound fi eld using all the connected (and activ ated) speakers. All Channel Stereo can be used while reproducing 2 channel stereo source.
Advanced operations 28 7 Contents of the on-scree n bar during playback DVD VIDEO DVD AUDIO VCD SVCD CD MPEG4 * * H – O are not available. A Shows disc type. B Show s current transfer rate (Megabits per second). C Shows disc number . D Show s current title (for DVD VIDEO) or group (for D VD A UDIO) number .
Advanced operations 29 Y ou can start playing a title, chapter or track you specify . Y ou can also play a disc from specif ied time. Locating a desired scene from the DVD menu D VD VIDEOs generally have their o wn menus which show disc contents and you can display them on the TV screen.
Advanced operations 30 5 Press ENTER. 6 Press ON SCREEN. The on-screen bar disappears. NOTE • You can select up to the 99 th chapter/track. Locating a desired position by specifying the time 7 For D.
Advanced operations 31 7 For MP3/WMA: During playback or while stopped For JPEG/MP EG4: While stopped 1 Press Cursor 3 / 2 / Y / 5 to select the desired group/track/file. • For MP3/WMA, playback starts from the select ed track. 2 Press 3 (play button) or ENTER.
Advanced operations 32 When using the on-screen bar: 1 Press ON SCREEN twice. The on-screen bar appears on the TV screen. 2 Press Cursor 3 / 2 to highlight . 3 Press ENTER. 4 Press Cursor Y / 5 repeatedly to select the desired subtitle. 5 Press ENTER.
Advanced operations 33 Selecting browsable still picture recorded on DVD AUDIO Most D VD A UDIOs include browsable still pictu res (B.S.P .), which usually appear b y turns automatically during playback according to the playback sequence.
Advanced operations 34 4 Press ENTER. Example: 5 Press Cursor Y / 5 to change the setting. 6 Press ENTER. The current VFP settings appe ar again. 7 Repeat steps 3 to 6 to adjust other parameters. 8 Press VFP. NOTE • Although the setting display disappears in the middle of the procedure, the setting at that time will be stored.
Advanced operations 35 Y ou can play titles or tracks on a disc in random order . 7 While stopped 1 Press PLAY MODE repeatedly until appears on the TV screen. 2 Press 3 (play button). • When more than one discs are loaded, the system starts Random Playback of the next disc after completing current disc playback.
Advanced operations 36 Repeating a desired part [A-B Repeat] Y ou can repeat playback of a desired part by specifying the beginning (point A) and ending (point B). 7 During playback 1 Press ON SCREEN twice. The on-screen bar appears on the TV screen. 2 Press Cursor 3 / 2 to highlight .
Advanced operations 37 IMPORTANT Before using the remote control for the following operation; • Set the remote control mode sele ctor to A UDIO . NOTE Before you start operation; • There is a time limit when doing th e following steps. If the setting is cancelled before you finish, start from step 1 again.
38 Setting DVD preferences • Y ou can change the language us ed in the setup menus. See “Menu description” below . Basic operation on the setup menus IMPORTANT Before using the remote control for the followi ng operation; 1 Set the remote control mode se lector to A UDIO .
Setting DVD preferences 39 :Picture menu (PICTURE) 7 MONIT OR TYPE Y ou can select the monitor type to match your TV when you play D VDs recorded in the picture’ s height/width ratio of 16:9. • 16:9 (Wide television con version) Select this when the aspect ratio of your TV is 1 6:9 (wide TV).
Setting DVD preferences 40 7 Distance menu (DIST ANCE) Example: In this case, set the distance of each speak er as follo ws; • Distance of front speakers: 3.
Setting DVD preferences 41 Countr y/Area codes list for Parental Lock AD Andorra ER Eritrea LA L ao People’ s Democratic Republic RW R w a n d a AE United Arab Emirates ES Spain SA Saudi Ar abia AF .
42 T uner operations IMPORTANT Before using the remote control for the followi ng operation; 1 Set the remote control mode se lector to A UDIO . 2P r e s s FM /AM . 1 Press FM/AM repeated ly to select the band. Example: When the system is tuned in to 810 kHz.
T uner operations 43 Once a station is assigned to a channel number , the station can be quickly tuned in. Y ou can preset 30 FM and 15 AM stations. 7 To preset the stations 1 Tune in the station you want to preset. • If you want to store the FM reception mode for an FM station, select the reception mode you want.
44 A V COMPU LINK remote control system The A V COMPU LINK remote control system allo ws you to operate JVC TVs and VCRs through the ce nter unit. This system is equipped with the A V COMPU LINK-III, which adds a function to operate JVC’ s video componen ts via the video components terminals.
45 References 7 Handling Discs • Remove the disc from its case by holding it at the edge while pressing the center hole lightly . • Do not touch the shin y surface of the disc or bend the disc. • Put the disc back in its case after use to prev ent warping.
References 46 7 Center un it (XV-THM606/XV-THM603 /XV-THM505/XV-THM501/ XV-THM303/XV-TH M301) Audio section T otal Harmonic Distortion 0.02 % NOTE: This value is measured at System cord CONNECTOR for reference.
References 47 7 Satellite Speakers Front speakers (SP-THM606F) Speakers: 5.5 cm (2-3/16 inches) M 2, 3.0 cm (1-3/16 inches) Bass-reflex, Magne tically Shielded Power Handling Capacity: 140 W Impedance: 4 C Frequency Range: 95 Hz to 40 kHz Dimensions (W M H M D): 250 mm M 1 103 mm M 250 mm (9-7/8 inches M 43-7/16 inches M 9-7/8 inches) Mass: 3.
48 TH-M606-505-501-303-301[JC]-08Spec. fm Page 48 Wednesday, March 24, 2004 4:37 PM.
EN 0204SKMIDEJEM © 2004 VICT OR COMP ANY OF JAP AN, LIMITED TH-M606/TH-M603/ TH-M505/TH-M501/ TH-M303/TH-M301 D VD DIGIT AL THEA TER SYSTEM For the U.
デバイスJVC TH-M606/TH-M603の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
JVC TH-M606/TH-M603をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC TH-M606/TH-M603の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC TH-M606/TH-M603の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC TH-M606/TH-M603で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC TH-M606/TH-M603を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC TH-M606/TH-M603の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC TH-M606/TH-M603に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC TH-M606/TH-M603デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
