JVCメーカーTU-DB1SKの使用説明書/サービス説明書
ページ先へ移動 of 22
DIGIT AL TERRESTRIAL SET T OP BOX INSTRUCTIONS TU-DB1SK ENGLISH Trade Mark of the DVB Digital V ideo Broadcasting Project (1991 to 1996) Number: 3209.
- 1 - CONTENTS Safety Precautions 2 In the box 3 Over Air Download 3 STB buttons 4 Remote control buttons 5 Preparation 7 Connections 7 Switching on 8 Inithial settings 8 Everyday Operation 9 Changing.
- 2 - SAFETY PRECAUTIONS POWER Always use the provided AC adapter. Operate only from the power source specified (AC 100-240 V ,50/60Hz) on the AC adapter . In using, the AC adapter get heat on the surface of the case. It is normal, not defective. Do not be covered with any material on case of AC adapter while it is in operation.
- 3 - IN THE BOX Thank you for buying this JVC Degit al T errestria l Set T op Box. Inside your package you should have: Degital T errestrial Set T op Box (STB) receiver AC adaptor x1 Remote control u.
- 4 - RECEIVER BUTTONS Front:.
- 5 - REMOTE CONTROL BUTTONS.
- 6 - REMOTE CONTROL BUTTONS T o operate this STB: Set the Slide Switch to STB position. For details of the use of each buttons, see each sections explanation. Note: V olume-/+ buttons and the Mute button work for the volume from the T V . T o operate a JVC brand TV or VCR: Set the Slide Switch to the TV/VCR position.
- 7 - PREP A RA TION Connections Place your receiver on a firm, level surface with at least a 10cm gap around all sides of the case and in a position convenient for connection to your television, a mains power outlet and a TV aerial wall outlet (or the 'flying lead' from your TV aerial, as appropriate).
- 8 - PREP A RA TION Switching on T urn on your TV set and select the SCAR T input (with the A V key , or similar , on the television remote control). Press the [ST ANDBY] key on the remote control handset. The power lamp change to green and the receiver's menu will be seen on the TV screen.
- 9 - If no digital terrestrial television broadcasts are found the receiver will display a message: Y ou should then refer to the T roubleshooting Guide on page 20 to establish the cause of the problem.
- 10 - Icons are also displayed in the information banner and if this channel is a favourite channel (see - ADV ANCED OPERA TION - Favourite Channels on page 15). favorite channel icon If the selected channel is locked (see - ADV ANCED OPERA TION - Channel Prote ction on page 14), you must enter the correct four digit code to view the channel.
- 11 - The channels are listed at theleft of the screen, each with the 'current event' (the name of the programme showing at that time) and the 'next events' (the following programmes). When the EPG screen is first displayed, the channel last watched is highlighted in the list of channels.
- 12 - WIDESCREEN TV sets are available with screens of the standard (4:3) format and widescreen (16:9) format. When you first installed your receiver you specified the format of the connected TV (this can now be altered if necessary; see Section 3 - ADV ANCED OPERA TION - Configuring Y our Receiver).
- 13 - SYSTEM Use LEFT/RIGHT buttons to toggle System Menu Language. Press OK on the preferred language. COUNTRY Use LEFT/RIGHT buttons to toggle Country options. Press OK on the preferred Country . Audio Language Digital terrestrial television channels can broadcast simultaneous soundtracks in more than one language.
- 14 - SELECT This function selects a channel for viewing and is an alternative to using the [P+] and [P-] keys, channel number or EPG . Highlight the channel to be viewed, highlight the OK button at the base of the screen using the [LEFT] or [RIGHT] keys and press [OK].
- 15 - F A VOURITE CHANNELS There will be some channels that you tend to watch more often and some only occasionally . Although some duplicate channels you may want to delete from the channel list, others although not watched frequently , you will not want to do away with altogether.
- 16 - EVENT TIMER Y ou can also set a timer to switch the receiver to any channel without your intervention. Thisis intended for making video recordings of programmes when you are out. If a single programme is to be recorded, the receiver can be left switched to the required channel and the timer set on the VCR.
- 17 - FIRST TIME INST ALLA TION T o reset the receiver, highlight the First T ime Installation line in the menu and press [OK]. A warning screen is displayed in case of accidental operation. Highlight the YES button with the [LEFT] or [RIGHT] key and press [OK] to erase all the channels and settings and switch the receiver to standby .
- 18 - SPECIFICA TION GENERAL Broad casting system DVB-T 2k & 8k Video system P A L Number of preset channels 20 0 Channel frequencies 474 - 858 Mhz Stereo system MPEG Layer I & II 32/44.
- 19 - CONNECTING THE EXTERNAL DEVICES If your TV and VCR both have two scart sockets you can connect as follows.Unplug the aerial lead and connect this to the ANT IN socket on the rear of your receiver. Connect the aerial lead (supplied) from the L T OUT on the receiver to the ANT IN on the rear of the VCR.
- 20 - TROUBLESHOOTING GUIDE If you experience problems with the receiver or its installation, in the first instance please read carefully the relevant sections of this User Guide and this Troubleshooting section.
0804MKH-VT -VT 2004 V ictor Company of Japan, Limited ©2004 VICT OR COMP ANY OF JAP AN, LIMITED C 5 0 0 5 3 7 9 4.
デバイスJVC TU-DB1SKの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
JVC TU-DB1SKをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC TU-DB1SKの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC TU-DB1SKの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC TU-DB1SKで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC TU-DB1SKを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC TU-DB1SKの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC TU-DB1SKに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC TU-DB1SKデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
