JVCメーカーXV-N680Bの使用説明書/サービス説明書
ページ先へ移動 of 28
XV -N680B XV -N682S DVD PLA YER INSTRUCTIONS L VT2008-001A [J] DV300H-JN.BUSAJJB_ENG_MFL54544154 For Customer Use : Enter below the Model No. and Serial No. which are located on the rear of cabinet. Retain this information for future reference. Model No.
2 This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
3 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer ’ s instructions.
4 Introduction . . . . . . . . . . . . . . . . . .5-8 About the Symbol Display . . . . . . . . . . . . .5 Symbol Used in this Manual . . . . . . . . . . . . . .5 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .5 Handling Discs . . . . . .
Operation Reference Installation and Setup 5 To ensure proper use of this product, please read this owner ’s manual carefully and retain it for future reference. This manual provides information on the operation and maintenance of your DVD player . Should the unit require service, contact an authorized service location.
6 T ypes of Playable Discs DVD (8 cm / 12 cm disc) V ideo CD (VCD/SVCD) (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit plays DVD± R/RW and CD-R/RW , Dual disc that contains audio titles, MPEG4, MP3, WMA, and/or JPEG files.
7 Introduction Front Panel a 1 1 / / ' ' ST ANDBY/ON Switches the unit ON and OFF . b Disc T ray Insert a disc here. c Z (OPEN/CLOSE) Opens or closes the disc tray . d Display window Shows the current status of the unit. e Remote Sensor Point the remote control here.
8 Remote Control ST ANDBY/ON ( 1 1 / / ' ' ) Switches DVD Player ON and OFF . OPEN/CLOSE ( Z ) Opens and closes the disc tray . P AUSE/STEP ( X ) Pauses playback temporarily/ press repeatedly for frame-by-frame playback. SKIP ( . / > ) Go to next chapter or track.
Operation Reference Introduction Installation and Setup Setting up the Player The picture and sound of a nearby TV , VCR, or radio may be distorted during playback. If this occurs, position the player away from the TV , VCR, or radio, or turn off the unit after removing the disc.
10 HDMI connection If you have an HDMI TV or a monitor , you can connect it to this player using an HDMI cable. 1. Set the TV’ s source to HDMI (refer to TV Owner ’s manual). 2. Connect the HDMI OUTPUT jack on the unit to the HDMI jack on a HDMI compatible TV or monitor (H) .
Operation Reference Introduction 11 Installation and Setup Audio Connection to Optional Equipment Connect the DVD player to your optional equipment for audio output.
12 When you turn on for the first time The menu for a language selection will appear when you turn on the unit for the first time. Y ou must select a language to use the unit. Use b / B / v / V to select a language then press ENTER and the confirm menu will appear .
Operation Reference Introduction 13 Installation and Setup LANGUAGE Menu Language Select a language for the Setup menu and the on-screen display . Disc Audio / Subtitle / Menu Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu.
14 AUDIO Each DVD disc has a variety of audio output options. Set the player ’s AUDIO options according to the type of audio system you use. Dolby Digital / DTS / MPEG Bitstream – Select “Bitstream” if you connect this unit’s DIGIT AL AUDIO OUTPUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder .
Operation Reference Introduction 15 OTHERS PBC Set Playback Control (PBC) to On or Off. On: V ideo CDs with PBC are played according to the PBC. Off: V ideo CDs with PBC are played in the same way as Audio CDs. B.L.E. (Black Level Expansion) To select the black level of playback pictures.
16 Operation General Features Buttons Operations OPEN/CLOSE ( Z ) Opens or closes the disc tray . P AUSE/STEP ( X ) During playback, press P AUSE/STEP ( X ) to pause playback. Press P AUSE/STEP ( X ) repeatedly to play Frame-by- Frame. SKIP ( . / > ) During playback, press SKIP ( .
17 Operation Notes on general features: • On a V ideo CD with PBC, you must set PBC to Off on the setup menu to use the repeat function (See “PBC” on page 15). • If you press SKIP ( > ) once during Repeat Chapter (T rack) playback, the repeat playback cancels.
18 Playing an Audio CD or MP3/WMA file This unit can play Audio CDs or MP3/WMA files. MP3/ WMA/ Audio CD Once you insert an MP3/WMA files recorded media or Audio CD, a menu appears on the TV screen. Use v / V to select a track/file and then press PLA Y ( N ) or ENTER and playback starts.
19 Operation Programmed Playback The program function enables you to store your favorite tracks from any disc in the player memory . A program can contain 30 tracks. 1. Insert an Audio CD or MP3/WMA files recorded media. AUDIO CD or MUSIC menu appears.
20 V iewing a JPEG file This unit can play JPEG files. 1. Insert a JPEG files recording media. The PHOTO menu appears on the TV screen. 2. Press v / V to select a folder , and press ENTER. A list of files in the folder appears. 3. If you want to view a particular file, press v / V to highlight a file and press ENTER or PLA Y ( N ).
21 Playing a MPEG4 Movie file This unit can play MPEG4 files. 1. Insert a MPEG4 file recording media. The MOVIE menu appears on the TV screen. 2. Press v / V to select a folder , and press ENTER. A list of files in the folder appears. 3. If you want to view a particular file, press v / V to highlight a file and press ENTER or PLA Y ( N ).
22 Playing a DVD VR format Disc This unit will play DVD-RW disc that is recorded using the Video Recording (VR) format. 1. Insert a disc and close the tray . The DVD-VR menu appears on the TV screen. 2. Press v / V to select a title then press PLA Y ( N ) or ENTER and playback starts.
23 Reference Remote Control Function Remote Control C1/C2/C3 Code Switching This unit is initially set to C3 code (JVC DVD PLA YER code). Y ou can easily change the Remote Control code to C1 (JVC VCR code), C2 (JVC DVD RECORDER code) or C3 as shown below .
24 Language Code Abkhazian 6566 Afar 6565 Afrikaans 6570 Albanian 8381 Ameharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 A ymara 6588 Azerbaijani 6590 Bashkir 6665 Basque 6985 Bengali; Bangla 6678.
25 Reference Symptom No power . The power is on, but the DVD player does not work. No picture. No sound. The DVD player does not start playback. The remote control does not work properly . Possible Cause • The power cord is disconnected. • No disc is inserted.
26 General Power requirements: AC 120 V ~ 60 Hz Power consumption: 9 W Dimensions (Approx.): 430 x 39 x 192 mm (17 x 1.5 x 7.6 inches) (W x H x D) without foot Net weight (Approx.): 1.5 kg (3.3 lbs) Operating temperature: 5 °C to 35 °C (41 °F to 95 °F) Operating humidity: 5 % to 90 % Outputs VIDEO OUTPUT : 1.
27 Reference Wa rranty (Only in U.S.A.).
EN 0209SKMLGEEGL P/N: MFL54544154 XV -N680B / XV -N682S.
デバイスJVC XV-N680Bの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
JVC XV-N680Bをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC XV-N680Bの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC XV-N680Bの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC XV-N680Bで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC XV-N680Bを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC XV-N680Bの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC XV-N680Bに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC XV-N680Bデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
