KathreinメーカーUFS 910の使用説明書/サービス説明書
ページ先へ移動 of 16
Manual UFS 902/910 Application of external USB storage media for recording and playback.
2 UFS 902/910 KA THREIN cannot be held liable for damage, loss of data or consequential loss of any kind (e.g. loss of pro fi t, interruption of production, loss of data and information, or other det.
3 Connect the USB storage device to one of the two USB 2.0 interfaces on the receiver rear panel. Press the button to access the receiver ’ s main menu. The following display will appear: Select the “Service menu” with the buttons and con fi rm by pressing .
4 Please Wait Use the buttons to choose the selection fi eld “Formatting” and con fi rm the launch of the formatting procedure with the button. The following display will appear: Formatting leads to permanent deletion of all data saved on the storage medium! Con fi rm message with the button.
5 SCANNING EXTERNAL USB ST ORAGE MEDIA FORMA TTING AND SCANNING AN EXTERNAL USB ST ORAGE MEDIUM During scanning, the connected USB storage medium is scanned for errors, which are automati- cally corrected by the receiver .
6 RECORDING Press the button. The following display will appear: OTR (ONE TOUCH RECORDING) Y ou are now able to change the settings (default) for recording: Select the parameters to be changed with the buttons. Use the buttons to make changes.
7 Press the button. The following display appears: PROGRAMMING A RECORDING VIA EPG (TIMER) RECORDING Select the desired channel from the available lists/views as described in the UFS 910 manual. After selecting the desired channel, press the " (yellow) button.
8 If required, use the cursor buttons to select the desired external storage device. If more than one storage medium is connected to the receiver or if a storage medium with several partitions has been connected, you can select the storage medium or partition on which the recordings are to be made.
9 PLA YBACK T o open the recording list, press the button , # (select with the buttons and then press ) or the button. the following display will appear: In the view , recordings ca.
10 REMOTE CONTROL BUTT ONS AND THEIR FUNCTIONS Y ou have the following options during playback: Pause Interrupts playback. T o resume playback, press again or press the Play button. Info 1x Displays progress bar showing the time played back so far as well as the remaining time of the recording (see picture on next page).
11 PLA YBACK Displays current playback mode (in example, “Play”) Re Remaining time BT i T ime played back so far EDITING RECORDINGS IN THE RECORDING LIST Use the buttons to select the recording you would like to edit. Next, press the button to call up the “Editing” menu.
12 PLA YBACK Rename: Press the button to rename the recording you have previously selected. A keypad will appear with which you can enter names alphanumerically . For instructions on how to enter names, please see the section “Alphanumeric Input” in your UFS 902/910 manual.
13 TIMESHIFT (TIME-SHIFTED VIEWING) If you cannot catch the beginning of a programme because you are occupied with something else, or if you have to take a break from watching while a programme is being broadcast, you can watch it in timeshift mode. Press the button to activate this mode.
14 SA VE/EXTEND TIMESHIFT RECORDING T o save a timeshift recording and not lose it after you have fi nished viewing it, or to extend the recording time, press the button. The following message will appear: Use the buttons to select the entry to be modi fi ed.
15 MESSAGES/ERROR MESSAGES This message is displayed whenever a hard disk which is not F A T32 formatted is connected to a USB interface. The hard disk can then be formatted in the menu “Service menu/USB Device Management” (see pages 3-4). If the connected hard disk contains F A T32 partitions, this message is not displayed.
Internet: http://www .kathrein.de KA THREIN-Werke KG • Anton-Kathrein-Straße 1 - 3 P .O. Box 10 04 44 • 83004 Rosenheim 936.3305/B/1008/ZWT - Subject to technical modi fi cations! USB device is being formatted. The USB storage device is write-protected.
デバイスKathrein UFS 910の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Kathrein UFS 910をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKathrein UFS 910の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Kathrein UFS 910の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Kathrein UFS 910で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Kathrein UFS 910を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKathrein UFS 910の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Kathrein UFS 910に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKathrein UFS 910デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。