Kenmoreメーカー625.34857の使用説明書/サービス説明書
ページ先へ移動 of 32
OWNER'S MANUAL MODEL NOS. 625.348570 625.348590 Caution: Read and Follow All Safety Rules and Operating Instructions Before First Use of This Product. If you have questions when installing, operating or main- taining your softener, and when setting the timer, call this toll-free number.
WARRANTY I I SEARS RESIDENTIAL WATER SOFTENER FULL ONE YEAR WARRANTY ON WATER SOFTENER For one year from the date of purchase, when this water softener is installed and maintained in accordance with our instructions, Sears will repair, free of charge, defects in material or work- manship in this water softener.
TABLE OF CONTENTS I. .I PAGE NO. SECTION 1 SOFTENER START UP A. SAFETY GUIDES B. CHECK LIST OF STEP-BY-STEP GUIDES TO INSTALL C. PROGRAM THE TIMER D. SANITIZING THE WATER SOFTENER E. FILL THE STORAGE TANK WITH SALT 4 5 6-7 8 9 SECTION 2 HOW YOUR WATER SOFTENER WORKS A.
SECTION 1 wATER SOFTENER START-UP I I 1A. SAFETY GUIDES • Read all steps, guides and rules carefully be- fore installing and using your new water softener. Follow all steps exactly to correctly install. Fail- ure to follow them could cause personal injury or property damage.
SECTION 1 wATER SOFTENER START-UP I I lB. CHECK LIST OF ALL STEP-BY-STEP GUIDES TO INSTALL Refer to the Installation Manual, part no. 7159931, for step-by-step guides. To be sure you have done all the steps to install the softener, read the following list.
SECTION 1 WATER SOFTENER START-UP I I lC. PROGRAM THE TIMER signal light adjust f salt level adjust LEVEL LEVEL display SELECT button UP button / Deluxe Demand Water Softener Kenmore Water Line for Customer Assistance 1-800-425-9345 _ RECHARGE TONIGHT _o_ _ .
SECTION 1 water SOFTENER START-UP I I lC. PROGRAM THE TIMER 2. SET WATER HARDNESS NUMBER: • Press the SELECT button once to ctisplay 25 (flashing) and HARDNESS. The grains per gallon (gpg) hardness of your water supply is on your water analysis report.
SECTION 1 wATER SOFTENER START-UP I I 1D. SANITIZING THE WATER SOFTENER Care is taken at the factory to keep your water softener clean and sanitmT. Materials used to make the softener will not infect or contaminate your water supply, and will not cause bacteria to form or grow.
SECTION 1 WATER SOFTENER START-UP I I 1E. FILL THE STORAGE TANK WITH SALT Brine (salt dissolved in water) is needed for each and evew regeneration. The water for making brine is metered into the salt storage tank by the softener. However, you must keep the tank filled with salt.
SECTION 2 .ow YOUR WATER SOFTENER WORKS I I 2B. FACE PLATE TIMER FEATURES EXTRA RECHARGE Sometimes, a manually smrte(t regeneration (re- charge) may be desired, or needed. Two examples aye: --You have used more water than usual (guests visiting) and you may run out of soft water before the next timer started regeneration.
SECTION 2 HOW YOUR WATER SOFTENER WORKS I I 2A. FACE PLATE TIMER FEATURES OPTIONAL SETTINGS- CLEAN FEATURE MINUTES, MAXIMUM DAYS BETWEEN REGEN- ERATIONS, and 12 / 24 HOUR TIME READINGS: 1. To set 1,2 or all 3 options, press and hold SELECT for 3 seconds.
SECTION 2 .ow YOUR WATER SOFTENER WORKS I I 2B. SOFT WATER SERVICE AND REGENERATION SERVICE When the softener is giving you soft water, it is called "Service". During service, hard water flows through the house main water pipe into the softener.
SECTION 2 .ow YOUR WATER SOFTENER WORKS I I 2B. SOFT WATER SERVICE AND REGENERATION _]BRINING: During brining, the brine is moved from the salt storage area, into the resin tank. Inside the resin tank, brine cleans hardness minerals from the resin beads and they are discharged out the drain.
SECTION 2 .ow YOUR WATER SOFTENER WORKS 2B. SOFT WATER SERVICE AND REGENERATION AUTOMATIC BYPASS During the brining, brine rinse and backwash cycles of regeneration, hard water goes through the softener valve and to the house pipes. If a faucet is opened, hard water is there for your needs.
SECTION 3 CARE OF YOUR SOFTENER I I 3A. SALToooREFILLING STORAGE TANK/BREAKING A SALT BRIDGE WHEN TO REFILL WITH SALT The Salt Monitor System (see page 10) will turn on the low salt light to warn you when to refill with salt. Check for a low salt light a few weeks after you install the softener, and evew week after that.
SECTION 3 CARE OF YOUR SOFTENER I I 3B. KEEPING THE WATER SOFTENER CLEAN COVERS To keep your new Kenmore water softener looking nice, apply a coat of paste wax and repeat once a year. When dusty, wipe it with a damp cloth to keep it sparkling. NOTE: Never use cleaners having ammonia or abrasives.
SECTION 3 CARE OF YOUR SOFTENER I I 3C. KEEP THE SOFTENER FROM FREEZING If the softener is installed where it could freeze (summer cabin, lake home, etc.), you must drain all water from it to stop possible freeze damage. To drain the softener- o o o o Close the shut-off v_flve on the house m_dn water pipe, near the water meter or pressure rank.
SECTION 3 CARE OF YOUR SOFTENER I I 3D. HELPFUL HINTS CHECKLIST ... TO HELP YOU SAVE MONEY If your water softener fails to work, make the following easy checks. Often, you will find what's wrong yourself and you won't have to call and wait for service.
SECTION 4 OTaER Ta,.GS TO K.OW I I 4A. DIMENSIONS/SPECIFICATIONS BYPASS VALVES F SINGLE-PLASTIC OUTWARD FOR Bypass SINGLE-BRASS Push q ;. , For SH Bypass [INWARD I FOR [SERVICE 3-VALVE SE_ RVICE Close.
SECTION 5 SERVICE TECH. INFORMATION I I 5A. TROU B LES H OOTI N G Keep this manual with your water softener. If repairs are needed, the service technician must have the informa- tion on the following 8 pages. For telephone assistance, call toll free, 1-800-426-9345.
SECTION 5 SERVICE TECH INFORMATION I I 5A. TROU B LES H OOTI N G AUTOMATIC ELECTRONIC DIAGNOSTICS The face plate computer has a self-diagnostic function for the electrical system (except input power and water meter). The computer monitors the electronic components and cir- cuits for correct operation.
SECTION 5 SERVICE TECH. INFORMATION I I 5A. TROU B LES H OOTI N G VALVE POSITION INDICATORS: Depending on the valve position, the following indicators show in the display: INDICATOR VALVE POSITION Sen/ ......... service Fill ........... fill Brine ...
SECTION 5 SERVICE TECH INFORMATION I I 5A. TROU B LES H OOTI N G MANUAL ADVANCE REGENERATION CHECK This check verifies proper operation of the valve motor, brine tank fill, brine draw, regeneration flow rates, and other controller functions. Always make the initial checks, and the manual initiated diagnostics.
SECTION 5 SERVICE TECH. INFORMATION I I 5B. ROTARY VALVE SERVICE Before working on the valve, turn off the water supply and disconnect from electrical power. TO RELIEVE PRESSURE: --3 VALVE BYPASS: Close the inlet valve and (:)pen a soft water faucet. Then close the outlet valve and (:)pen the bypass valve.
SECTION 5 SERVICE TECH INFORMATION I I 5C .. WATER FLOW THROUGH THE SOFTENER VALVE SERVICE CYCLE To Valve Outlet (soft water) bottom distributor ¢ from Valve Inlet (hard water) ) distributor resin tank POSITION SWITCH D Hard water enters the valve inlet port.
SECTION 5 SERVICE TECH. INFORMATION I I 5C. WATER FLOW THROUGH THE SOFTENER VALVE BRINING AND BRINE RINSE CYCLES bypass hard water to valve outlet venturi nozzle i brine from salt stor- age tank from Valve Inlet (hard water) After fill, timer/switch action allows the motor to turn the rotor and disc into BRINING position.
SECTION 5 SERVICE TECH INFORMATION I I 5C. WATER FLOW THROUGH THE SOFTENER VALVE soft water to valve outlet FAST RINSE CYCLE drain ! POSITION During FAST RINSE, the rotor & disc is positioned so water flow enters the resin tank through the top distributor, and exits through the bottom distributor, to the drain.
SECTION 6 REPAIR PARTS I I KENMORE WATER SOFTENERS MODEL NOS. 625.348570 AND 625.348590 1-- 7_ 24 Rating Decal Location O_ 23 22 21 2O 19 9 10 18 17 11 15 14 13 _12 16 KEY PART NO.
SECTION 6 REPAIR PARTS I I KENMORE WATER SOFTENERS MODEL NOS. 625.348570 AND 625.348590 48 ----------_4_ 47 I BRINE VALVE I ASSEMBLY 46 45 44 43 KEY PART NO.
SECTION 6 REPAIR PARTS I I KENMORE WATER SOFTENERS MODEL NOS. 625.348570 AND 625.348590 89 88 83 82 75 74 73 72 76 VALVE ASSEMBLY 66 64 65 62 63 96 97 99 98 30.
SECTION 6 REPAIR PARTS I I KENMORE WATER SOFTENERS MODEL NOS. 625.348570 AND 625.348590 PARTS LIST KEY PART NO. NUMBER 50 7131755 51 7133008 52 0900857 53 7117808 54 0503288 55 7113927 56 7142942 57 0.
OWNER'S MANUAL MODEL NOS. 625.348570 625.348590 The model number of your water softener is found on the rating de- cal. This decal is on the rim, under the salt cover.
デバイスKenmore 625.34857の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Kenmore 625.34857をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKenmore 625.34857の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Kenmore 625.34857の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Kenmore 625.34857で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Kenmore 625.34857を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKenmore 625.34857の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Kenmore 625.34857に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKenmore 625.34857デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
