Kenmoreメーカー625.38888の使用説明書/サービス説明書
ページ先へ移動 of 36
OWNER'S MANUAL MODEL NOS. UltraSoft 800 625.388800 UltraSoft 880 625.388880 Caution: Read and Follow All Safety Rules and Operating Instructions Before First Use of This Product. If you have questions when installing, operating or main- taining your softener, and when setting the timer, call this toll-free number.
WARRANTY A A N T Y SEARS RESIDENTIAL WATER SOFTENER FULL ONE YEAR WARRANTY ON WATER SOFTENER For one year from the date of purchase, when this water softener is installed and maintained in accordance with our instructions, Sears will repair, free of charge, defects in material or workmanship in this water softener.
Iii_i_iii_ii_i_iii_ii_i_iii_ii_i_iii_ii_i_iii_ii_i_iii_ii_i_iii_ii_i_ii TABLE OF CONTENTS A B E 0 F C O N E N ,JJJJ JJJ_J_J_J_J, a. B. C. D. E. a. B. a.
SECTION1 WATER SOFTENER START UP S C T N _JJJJJJJJJJJJJJJJ. _JJJJ JJJJJJJJJJ. _JJJJ JJJJJJJJJJ. _JJ_[JJJJJJJJJ" A. SAFETY GUIDES • Read all steps, guides and rules carefully before installing and using your new water softener. Follow all steps exactly to correctly install.
SECTION1 WATER SOFTENER START UP B. CHECK LIST OF STEP-BY-STEP GUIDES TO INSTALL To be sure you have done all the steps to install the softener, read the following list. Refer to the Installa- tion Manual, part no. 7258997, for step-by-step guides. Page numbers referred to are in the Installation Manual unless otherwise noted.
SECTION1 WATER SOFTENER START UP C. PROGRAM THE TIMER F display STATUS LOW SALT POWER ON UP button Cus_merAss_nce 1-800-426-9345 Kenmo_Wa_com RECHARGE button @-- PRESS FOR TONIGHT HOLD FOR IMMEDIATE .
SECTION1 WATER SOFTENER START UP C. PROGRAM THE TIMER _SET WATER HARDNESS NUMBER • Press the SELECT button once to display 25 (de- fault) and HARDNESS setting screen. The grains per gallon Hardness: (gpg) hardness of your _ Grains water supply is on your water analysis report.
SECTION1 WATER SOFTENER START UP D. SANITIZE THE Care is taken at the factory to keep your water soft- ener clean and sanitary. Materials used to make the softener will not infect or contaminate your water supply, and will not cause bacteria to form or grow.
SECTION1 WATER SOFTENER START UP E. ADDING SALT TO THE STORAGE TANK Brine (salt dissolved in water) is needed for each and every regeneration. The water for making brine is metered into the salt storage tank by the softener. You must keep salt in the tank, but because the wa- ter softener is very efficient, it is not necessary to keep it full.
[i!i !! :i:_ !! :i:_ SECTION 2 :i:! !! :i:_ !! :i:_i] HOW YOUR WATER SOFTENER WORKS A. FACEPLATE TIMER FEATURES S C T IL_III| N ,JJJJJJJJJJJJJJJJ. ,JJJJ JJJJJJJJJJ. 'dJ_idJdJdJdJ" ,JJ JJJJJJJJJ. ,JJJ JJJJJJJJJ. ,JJ JJJJJJJJJ. _dJ dJdJdJdJ. ,JJJJJJJJJJJJJJJJ.
[i!i !! _,i _ !! _,i _ SECTION 2 _i:! !! _,i _ !! _,i _i] HOW YOUR WATER SOFTENER WORKS A. FACEPLATE TIMER FEATURES Hardness changes the hardness setting.
[i!i !! :,i _! ! :,i _ SECTION 2 _i:! !! :,i _! ! :,i _i] HOW YOUR WATER SOFTENER WORKS A. FACEPLATE When selecting Ouick- Charg.e. as an option, the softener will automati- cally recharge if 95% of capacity has been unex- pectedly used and there [] 5:39 PM 11 Mor is less than 1/2 gpm flow.
[i!i !! :; _! ! :; _ SECTION 2 _i:! !! :; _! ! :; _i] HOW YOUR WATER SOFTENER WORKS KENMORE'S ULTRA CLEANSING FEATURE (UltraSoft 880 only) The ultra cleansing feature keeps larger particles of sediment from entering the home's plumbing sys- tem.
[i!i !! :; _! ! :; _ SECTION 2 _i:! !! :; _! ! :; _i] HOW YOUR WATER SOFTENER WORKS B. SOFT WATER SERVICE and REGENERATION REGENERATION [] FILL: Salt, dissolved in water, is called brine. Brine is needed to clean the hardness minerals from the resin beads.
[i!i !! :; _! ! :; _ SECTION 2 _i:! !! :; _! ! :; _i] HOW YOUR WATER SOFTENER WORKS B. SOFT WATER SERVICE and REGENERATION [] FAST RINSE: Backwash is followed by a fast flow of water down through the resin tank. The fast flow packs the resin bed and gets it ready for return to service (FIG.
[i!i !! :i :_ !! :i :_ !! :i :i SECTION 3 CARE OF YOUR WATER SOFTENER A. SALT: ADDING TO THE STORAGE TANK, SALT BRIDGE S C T N ,JJJJJJJJJJJJJJJJ. ,JJJJ JJJJJJJJJJJ. 'dJ_dJdJdJdJ. ,JJ JJJJJJJJJ. ,JJJJ JJJJJJJJJ. ,JJ JJJJJJJJJ. _dJ dJdJdJdJ. ,JJJJJJJJJJJJJJJJ.
[i!i !! :; _! ! :; _! ! :; :i SECTION 3 CARE OF YOUR WATER SOFTENER B. KEEPING THE WATER SOFTENER CLEAN NOZZLE & VENTURI A clean nozzle and venturi (FIG. 11) is a must for the softener to work right. This small unit moves brine from the salt storage tank to the resin tank duringre- generation.
[i!i !! :i _! ! :i _! ! :i :i SECTION 3 CARE OF YOUR WATER SOFTENER C. PROTECT THE WATER SOFTENER FROM FREEZING If the softener is installed where it could fl_eeze (summer cabin, lake home, etc.), you must drain all water from it to stop possible freeze damage.
[i!i !! :; _ !! :; _ !! :; _iSECTION 3 CARE OF YOUR WATER SOFTENER D. CHECKLIST ... TO HELP YOU SAVE MONEY If your water softener fails to work, make the following easy checks. Often, you will find what's wrong your- self and you won't have to call and wait for service.
[i!i !! _; _ !! _; _ SECTION 4 KNOW ABOUT YOUR WATER SOFTENER A. DIMENSIONS / SPECIFICATIONS S C T N ,JJJJJJJJJJJJJJJJ. ,JJJJJJJJJJJJJJJJ. ,JJJJ JJJJJ_JJJ. 'JJJ_JJJJJJJJ- ,JJ JJJJJJJJJ. ,JJJJJ JJJJJJJJJ. ,JJJJJJJJJJJJJJJJ. ,JJJJJJJJJJJJJJJJ. 7 A /' 1 C [ E t A B C D E F 1 F2 CM Salt Tank Height 34 86.
[i!i !! :; _! ! :; _ SECTION 4 KNOW ABOUT YOUR WATER SOFTENER 35 3O 25 u) O. v o. 20 £ r_ .e 15 o_ a. 10 A. DIMENSIONS / SPECIFICATIONS Pressure Drop (PSI) vs.
[i!i !! :;:_ !! :;:_ !! :;:_ !! :; SECTION 5 SERVICE TECH. INFORMATION S C T N ,JJJJJJJJJJJJJJJJ. ,JJJJJJJJJJJJJJJJ. ,JJ JJJJJJJJ= ,JJ JJJJJJJJJ= _dJ dJdJdJdJ.
[i!i !! :i :_ !! :i :_ !! :i :_ !! :j SECTION 5 SERVICE TECH. INFORMATION A. TROUBLESHOOTING AUTOMATIC ELECTRONIC DIAGNOSTICS The faceplate timer (PWA) computer has a self-diag- nostic function for the electrical system, except for input power and water meter.
[i!i !! _i _ !! _i _ !! _i _ !! _i SECTION 5 SERVICE TECH. INFORMATION A. TROUBLESHOOTING NOTE: If the faceplate is left in a diagnostic display (or other displays when setting times or hardness), normal operating screen automatically returns if a button is not pressed within 4 minutes.
[i!i !! _; _ !! _; _ !! _; _ !! _;SECTION 5 SERVICE TECH. INFORMATION A. TROUBLESHOOTING MANUAL ADVANCE REGENERATION CHECK This check verifies proper operation of the valve motor, brine tank fill, brine draw, regeneration flow rates, and other controller functions.
[i!i !! _; _ !! _; _ !! _; _ !! _;SECTION 5 SERVICE TECH. INFORMATION B. ROTARY VALVE SERVICE Before working on the valve, turn off the water sup- ply and disconnect from electrical power. TO RE- LIEVE PRESSURE: • 3 VALVE BYPASS: Close the inlet valve and open a soft water faucet.
SECTION 5 SERVICE TECH. INFORMATION C. WATER FLOW THROUGH THE SOFTENER VALVE SERVICE CYCLE from Valve Inlet (hard water) top distributor To Valve Outlet (soft water) resin tank ¢ resin I bed bottom distributor _"{_ position switch Hard water enters the valve inlet port.
SECTION 5 SERVICE TECH. INFORMATION C. WATER FLOW THROUGH THE SOFTENER VALVE BRINING AND BRINE RINSE CYCLES venturi nozzle • from Valve Inlet brine from sal$ ." (hard water) storage tank water to valve outlet After fill, timer/switch action allows the motor to turn the rotor and disc into BRINING position.
SECTION 5 SERVICE TECH. INFORMATION C. WATER FLOW THROUGH THE SOFTENER VALVE FAST RINSE CYCLE drain soft water to valve outlet position switch During FAST RINSE, the rotor & disc is positioned so water flow enters the resin tank through the top distributor, and exits through the bottom distributor, to the drain.
SECTION 6 REPAIR PARTS FOR WATER SOFTENER Kenmore MODEL NOS. 625.388800 & 625.388880 S C T N ,JJJJJJJJJJJJJJJJ. ,JJJJ JJJJJJJJJJ. 'dJd_dJdJdJdJ. ,JJ JJJJJJJJJ. ,JJ JJJJJJJJ. ,JJ JJJJJJJJJ. _dJ dJdJdJdJ. ,JJJJJJJJJJJJJJJJ. ,JJJJJJJJJJJJJJJJ. 3 9 31 _.
SECTION 6 REPAIR PARTS FOR WATER SOFTENER KEY NO. 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Kenmore MODEL NOS. 625.388800 & 625.388880 WATER SOFTENER COMPLETE PART DESCRIPTION NUMBER 7229948 .
SECTION 6 REPAIR PARTS FOR WATER SOFTENER Kenmore MODEL NOS. 625.388800 & 625.388880 19 -"----'-,._ 18_ 17 20 INLET - OUTLET GROUNDING CLAMPS 6-3 Problems, Questions? Call 1- 800- 426- 9.
SECTION 6 REPAIR PARTS FOR WATER SOFTENER Kenmore MODEL NOS. 625.388800 & 625.388880 KEY PART NO. NUMBER 1 7168647 2 0513860 3 7097202 4 0516947 5 7093216 6 7092278 7 7170288 8 0516211 9 0516924 1.
SECTION 6 REPAIR PARTS FOR WATER SOFTENER I VALVE ASSEMBLY I 46 42 28 29 12 13 14 //-15 _16 17 11 10 9 25 26 27 21 23 24 6-5 Problems, Questions? Call 1- 800- 426- 9345 Kenmore Water Line.
SECTION 6 REPAIR PARTS FOR WATER SOFTENER KEY PART NO. NUMBER 1 7224087 2 7228544 3 7231393 4 0900857 5 7171250 6 7219545 7 7169180 8 0900431 9 7271270 10 7170288 11 0501228 12 7170327 13 7173024 14 7.
OWNER'S MANUAL MODEL NOS. UltraSoft 800 625.388800 UltraSoft 880 625.388880 The model number of your water softener is found on the rating decal. This decal is on the rim, under the salt cover.
デバイスKenmore 625.38888の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Kenmore 625.38888をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKenmore 625.38888の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Kenmore 625.38888の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Kenmore 625.38888で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Kenmore 625.38888を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKenmore 625.38888の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Kenmore 625.38888に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKenmore 625.38888デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
