KenwoodメーカーDP-R7090の使用説明書/サービス説明書
ページ先へ移動 of 24
CD PLA YER DP-R7090 DP-R6090 INSTRUCTION MANUAL KENWOOD CORPORA TION DIGITAL AUDIO COMPACT B60-3245-00 MA ( T, M ) I D 98/12 11 10 9 8 7 6 5 4 3 2 1 97/12 11 10 9 8 7 6 5 This instruction manual is used for two models. Model availability and features (functions) may differ depending on the country and sales area.
DP-R7090/R6090 (En) 2 Before applying power Caution : Read this section carefully to ensure safe operation. Units are designed for operation as follows. U.S.A. and Canada ................................................................ A C 120 V only Australia .
3 DP-R7090/R6090 (En) Unpacking Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately .
DP-R7090/R6090 (En) 4 System connections Caution: Do not plug in the power lead until all connections are com- pleted. Malfunction of microcomputer If operation is not possible or erroneous display appears even though all connections have been made properly , reset the microcomputer referring to “In case of difficulty”.
5 DP-R7090/R6090 (En) Adjusting the output levels of the output jacks and headphone output The OUTPUT level (UP/DOWN) keys of the remote control unit can adjust the output levels from the LINE/OUT and PHONES jacks of the unit. OUTPUT DOWN UP T o use the headphone Connect a stereo headphone to the PHONES jack of the CD player .
DP-R7090/R6090 (En) 6 SYSTEM CONTROL OPERA TIONS Remote Control Lets you operate this unit with the system remote contrl unit supplied with the amplifier or receiver . Automatic Operation (Except [XR] equipment) Automatically switches the input selector on the amplifier or receiver when you start playback from this unit.
7 DP-R7090/R6090 (En) DISC SKIP TEXT DISP. ALL INFO. TIME DISP. REPEAT RANDOM P.MODE 4¢ 1¡ DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 0 6 7 EDIT PHONES - ON – STANDBY DIGITAL AUDIO DIGITAL AUDIO COMPACT * & ^ 90 7 6 5 4 3 2 1 $ # @ ! % 8 TEXT Controls and indicators 0 Open/Close key ( 0 ) 9 Opens and closes the disc tray .
DP-R7090/R6090 (En) 8 Operation of remote control unit 1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries. 2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
9 DP-R7090/R6090 (En) 1 Preparing to Play T racks - ON – STANDBY Load/unload a disc. 2 Close the tray. 0 ALL TEXT SEARCH For most CD-TEXT discs, it is convenient to read the complete disc information into the CD player before playing the disc. This allows text information such as TITLE SEARCH, TEXT DISPLAY, ALL INFO.
DP-R7090/R6090 (En) 10 Normal play (TRACK mode) Use the following procedure to play a CD in the original order of tracks from track No. 1. : Keys and control used in the operations described on this page. ÷ Each press pauses and plays the CD alternately.
11 DP-R7090/R6090 (En) REMOTE CONTROL UNIT RC-P0601 Skipping tracks G P0 M1 D ET I N RM D Goes off. Goes off. Goes off. Playback from desired track 2 Select the desired track No.
DP-R7090/R6090 (En) 12 In the case of a CD-TEXT disc, the tracks to be heard can be searched by title. ÷ Load a disc (CD-TEXT support) in the CD player. ÷ Check that the unit is in the normal play TRACK mode. ! ÷ Press the ALL TEXT SEARCH key. 9 1 Preparation : Keys and control used in the operations described on this page.
13 DP-R7090/R6090 (En) :AC BE D. F. . TEXT DISPLAY T ime display on CD player (TIME DISPLA Y) Each press of the TIME DISPLAY key changes the displayed contents. Displays ÷ When there is no text information to be displayed “ – – – – – ” is scrolled on the display.
DP-R7090/R6090 (En) 14 Programmed play (PGM mode) Use the following procedure to program desired tracks in a desired order. (up to 32 tracks) ÷ Load a disc in the CD player. Press so that the “PGM” indicator lights. 1 Preparation ÷ The programmed contents remain in memory.
15 DP-R7090/R6090 (En) T o check or change the programmed tracks 1 Press the CHECK key . REMOTE CONTROL UNIT RC-P0601 REMOTE CONTROL UNIT RC-P0601 Press until the track No. to be changed is displayed. CHECK REMOTE CONTROL UNIT RC-P0601 REMOTE CONTROL UNIT RC-P0601 2 Select the disc.
DP-R7090/R6090 (En) 16 1 Press so that the “PGM” indicator lights. Repeated playback T o repeat only the programmed tracks : Keys and control used in the operations described on this page. ™ Preparation ÷ Load a disc in the CD player. REMOTE CONTROL UNIT RC-P0601 REMOTE CONTROL UNIT RC-P0601 REMOTE CONTROL UNIT RC-P0601 2 Select the disc.
17 DP-R7090/R6090 (En) T o repeat the entire disc This allows repeated playback of all the tracks on the disc loaded in the disc tray. E RE PT AO N 1 Press so that the “PGM” indicator goes off. P.MODE 2 Switch REPEAT ON. REPEAT The current status is displayed when the key is pressed once.
DP-R7090/R6090 (En) 18 The following procedure allows to record a CD within the specified tape length so that no music is interrupted in the middle at the ends of sides A and B. Editing Preparation 1 Light the “EDIT” indicator. ÷ Load a disc in the CD player.
19 DP-R7090/R6090 (En) ÷ The edited data is cleared entirely. T o clear the edited contents T o check the edited contents ÷ When the CHECK key is pressed, track numbers and remaining time in the file A are displayed first, then those in the file B.
DP-R7090/R6090 (En) 20 Playback in a random order (Random playback) ™ As tracks are selected at random, you can enjoy listening to for a long time. ÷ Load a disc in the CD player. Preparation : Keys and control used in the operations described on this page.
21 DP-R7090/R6090 (En) T imer operations T imer playback of CD can be started at any time using an audio timer which is available in audio stores. 1 Turn the powers of the associated components ON. 2 Preparation Load a disc in the CD player. 9 Set the amplifier volume.
DP-R7090/R6090 (En) 22 Caution on disc used Cleaning If fingerprints or foreign matter become attached to the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards, in a radial manner .
23 DP-R7090/R6090 (En) ÷ Insert the power plug firmly to the AC outlet. ÷ Turn the amplifier’s power ON. ÷ Load the disc again with its label side up. ÷ Insert the disc properly . ÷ Wipe off the dust on the surface of the disc referring to “Disc handling precautions”.
DP-R7090/R6090 (En) 24 Specifications DP-R7090 [ Format ] System ............................ Compact disc digital audio system Laser ........................................................ Semiconductor laser [ D/A Convertors ] D/A Conversion ......
デバイスKenwood DP-R7090の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Kenwood DP-R7090をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKenwood DP-R7090の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Kenwood DP-R7090の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Kenwood DP-R7090で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Kenwood DP-R7090を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKenwood DP-R7090の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Kenwood DP-R7090に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKenwood DP-R7090デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
