KenwoodメーカーDPF-R6010の使用説明書/サービス説明書
ページ先へ移動 of 28
INSTRUCTION MANUAL KENWOOD CORPORA TION B60-3684-00 CH ( K,P,Y, M ,X ,T ) I D 99/12 11 10 9 8 7 6 5 4 3 2 1 98/12 11 10 9 8 7 6 5 4 3 2 1 This instruction manual is used for six models. Model availability and features (functions) may differ depending on the country and sales area.
CD-206/204/203/DPF-R6010/R4010/R3010 (En ) 2 Before applying power Caution : Read this section carefully to ensure safe operation. Units are designed for operation as follows. U.S.A. and Canada .........................................................
3 CD-206/204/203/DPF-R6010/R4010/R3010 (En ) Unpacking Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately.
CD-206/204/203/DPF-R6010/R4010/R3010 (En ) 4 L R CD SYSTEM CONTROL AC110-220V AC220-240V L R VARI ABLE LINE OUTPUT @ DIGITAL OUTPUT SYSTEM CONTROL OPTICAL COAXIAL SL16 XS 8 ƒ TEXT OPTICAL COAXIAL L R.
5 CD-206/204/203/DPF-R6010/R4010/R3010 (En ) OT UU PT 1 -d 2B The OUTPUT level (UP/DOWN) keys of the remote control unit can adjust the output levels from the LINE/OUT and PHONES jacks of the unit. Connect a stereo headphone to the PHONES jack of the CD player.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 6 DIGITAL AUDIO COMPACT MULTIPLE CD PLAYER DPF-R6010 D.R.I.V.E. TEXT TEXT DISP. ALL INFO. TIME DISP. REPEAT RANDOM P.
7 CD-206/204/203/DPF-R6010/R4010/R3010 (En) The keys with the same name as those on the remote control unit operate the same way as the remote control unit. 1 ON/STANDBY (POWER / ) switch 9 Turns the unit ON/STANDBY. 2 P.MODE key $ 3 TEXT DISP. key (CD-206/DPF-R6010 only) # Used to select the CD-TEXT information display.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 8 Operation of remote control unit (Except for CD-203/DPF-R3010) 1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries. 2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
9 CD-206/204/203/DPF-R6010/R4010/R3010 (En) REMOTE CONTROL UNIT RC-P0601 I DC SR A EI D G N 1 D: C DE T T X « 1 Preparing to Play T racks Load/unload a disc. Close the tray. ALL TEXT SEARCH (CD-206/DPF-R6010 only) For most CD-TEXT discs, it is convenient to read the complete disc information into the CD player before playing the disc.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 10 SINGLE TOTAL 10 9 8 7 6 5 4 3 2 1 REPEAT TRACK NO. DISC NO. 5 4 3 2 1 01 2 18 : 1 Check that the unit is in the normal play TRACK mode.
11 CD-206/204/203/DPF-R6010/R4010/R3010 (En) Skipping tracks Playback from desired track 2 Select the desired track No. 1 Select the disc. ÷ The track in the direction of the pressed key is skipped, and the selected track will be played from the beginning.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 12 01 C A 01 L M N O P Q ... BCDEFGHIJKL MNOPQ. . . TT IE LX Z Y 2 0: 13 2 1 D0 1I TL TE B AC In the case of a CD-TEXT disc, the tracks to be heard can be searched by title. ÷ Load a disc (CD-TEXT support) in the CD player.
13 CD-206/204/203/DPF-R6010/R4010/R3010 (En) Displays (CD-206/DPF-R6010 only) ÷ When there is no text information to be displayed “– – – – –” is scrolled on the display. ÷ In the case of a non-CD-TEXT disc, the ”NO CD TEXT“ display will appear for approx.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 14 G P0 M1 1 DT O N2 .5 G P0 M1 1 DT O N2 .5 « G P0 M1 B AD CF EH G Programmed play (PGM mode) Use the following procedure to program desired tracks in a desired order. (up to 32 tracks) ÷ Load a disc in the CD player.
15 CD-206/204/203/DPF-R6010/R4010/R3010 (En) D G P0 M1 5TO N2 .5 T o check or change the programmed tracks 1 Press the CHECK key. Press until the track No. to be changed is displayed. 2 Select the disc. 3 Select the new track No. 4 Set the entry. T o add a track to the program 1 Select the disc.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 16 Press to clear tracks from the end. T o clear tracks from the program To clear all tracks ÷ Each time the key is pressed, the last track in the program is cleared. ÷ The tracks which are programmed earlier than the track being played cannot be cleared.
17 CD-206/204/203/DPF-R6010/R4010/R3010 (En) < <> < E <2 1> > <> > N RM D0 0 5 « Playback in a random order (Random playback) ™ As tracks are selected at random, you can enjoy listening to for a long time. ÷ Load a disc in the CD player.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 18 1 Press so that the “PGM” indicator lights. Repeated playback T o repeat only the programmed tracks : Keys and controls used in the operations described on this page. ™ Preparation ÷ Load a disc in the CD player.
19 CD-206/204/203/DPF-R6010/R4010/R3010 (En) T o repeat the entire disc This allows repeated playback of all the tracks on the disc loaded in the disc tray. 1 Press so that the “PGM” indicator goes off. 2 Press the REPEAT key. For the CD-206/DPF-R6010 The current status is displayed when the key is pressed once.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 20 Blinks. CD-206/DPF-R6010 D ET ID S I? C The following procedure allows to record a CD within the specified tape length so that no music is interrupted in the middle at the ends of sides A and B. Editing Preparation 1 Light the “EDIT” indicator.
21 CD-206/204/203/DPF-R6010/R4010/R3010 (En) Editing Light up. 1 Press so that the "MULTI EDIT " indicator light. : Keys and controls used in the operations described on this page. Enter the recording time of the tape. ) 2 Do this operation in the stop mode.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 22 ÷ The edited data is cleared entirely. T o clear the edited contents T o check the edited contents ÷ When the CHECK key is pressed, track numbers and remaining time in the file A are displayed first, then those in the file B.
23 CD-206/204/203/DPF-R6010/R4010/R3010 (En) T imer operations Timer playback of CD can be started at any time using an audio timer which is available in audio stores. 1 Turn the powers of the associated components ON. 2 Preparation Load a disc in the CD player.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 24 Never play a cracked or warped disc. Cleaning If fingerprints or foreign matter be- come attached to the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards, in a radial manner.
25 CD-206/204/203/DPF-R6010/R4010/R3010 (En) ÷ Power plug is loosely connected. ÷ With the power plug connected to the switched AC outlet of an amplifier, the power of the amplifier is turned off. ÷ Disc is loaded upside down. ÷ Disc is loose. ÷ Disc is dirty.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 26 Specifications CD-206/DPF-R6010 [ Format ] System .......................... Compact disc digital audio system Laser ...................................................... Semiconductor laser [ D/A Convertors ] D/A Conversion .
27 CD-206/204/203/DPF-R6010/R4010/R3010 (En).
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 28 For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.
デバイスKenwood DPF-R6010の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Kenwood DPF-R6010をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKenwood DPF-R6010の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Kenwood DPF-R6010の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Kenwood DPF-R6010で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Kenwood DPF-R6010を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKenwood DPF-R6010の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Kenwood DPF-R6010に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKenwood DPF-R6010デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
