KenwoodメーカーDPX-MP7090Uの使用説明書/サービス説明書
ページ先へ移動 of 44
DU AL DIN SIZED CD RECEIVER DPX-MP7090U INSTR UCTION MANU AL © B64-3399-00/00 (MW) B64-3399-00_English_r1.indd 1 B64-3399-00_English_r1.indd 1 06.1.30 3:25:31 PM 06.
2 | English Con tents Safety precautions 4 Notes 5 About CDs 6 About USB device 7 About AA C, MP3 and WMA 8 General featur es 10 Pow er Selecting the Source Volume Attenuator System Q Audio Control Ad.
English | 3 Basic Operations of r emote control 35 Ac cessories/ Installation Proc edure 37 Connecting W ires to T erminals 38 Installation 39 T roubleshooting Guide 40 Specifications 44 The " AAC" logo is trademark of Dolby Laboratories. B64-3399-00_English_r1.
4 | English Safety precautions Do Not Load 8 cm (3 in.) CDs in the CD slot If you tr y to load a 8 cm (3 in.) CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. About CD play ers/disc changers connected to this unit Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit.
English | 5 Notes • No USB device comes with this unit. Y ou need to purchase a commercially available USB device . For the types of available USB devices, ref er to <About USB device> (page 7). • If you experience problems during installation, consult your Kenwood dealer .
6 | English Handling CDs • Do not touch the recor ding sur face of the CD . • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after reading the caution items on the package etc. • Do not stick tape etc. on the CD , or use a CD with tape stuck on it.
English | 7 About USB devic e Notes on Use of the USB Devic e This unit can play audio files stored in the flash memory and digital audio player that have a USB port (these devices are referred to as USB devices in this document).
8 | English About AA C, MP3 and WMA The playable AAC/MP3/WMA file (her eafter called Audio file) and the media format has the f ollowing limitation. The Audio file, which is not conforming to the specification, may not play normally , or the file and folder names may not display correctly .
English | 9 Playing order of the A udio file • The Audio file pla ys in the order which is written by CD writing software. Y ou may be able to set the playing order by writing the play sequence numbers such as "01" to "99" at the beginning of the file name.
10 | English General fea tures Powe r T urning ON the Power Press the [SRC] button. T urning OFF the Power Press the [SRC] button for at least 1 sec ond.
English | 11 2 Select the Sound type Press the [ Q] button. When you press the button once , the current sound setting is displayed. Each time you press the button, the sound setting alternates.
12 | English General fea tures Adjusting the detail of A udio Con t ro l Among the Basic Audio items, y ou can adjust the Bass level, Middle level, and Tr eble level in detail.
English | 13 5 Exit Audio Setup mode Press the [VOL] knob for at least 1 second. Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "ST ANDBY" display.
14 | English General fea tures Display T ype Selec tion Changing the display mode. Press the [DISP] button. Each time you press the button, the display mode alternates between the display modes shown in the table below .
English | 15 Display T ype A/ Display T ype B W allpaper selec ting Selecting a wallpaper to display when Display T ype is set to Display T ype A/ Display T ype B. 1 Select the wallpaper display Refer to <Graphic part/ Spectrum Analyzer Display Switching> (page 14).
16 | English Display T ype C/ Display T ype D T ext Display Switching Changing the text display . 1 Select the display T ype Press the [DISP] button. Select the Display Type C/Display Type D . 2 Enter text select mode Press the [DISP] button f or at least 1 second.
English | 17 The text display in the Upper te xt display part In T uner source Information Display Station name "SNPS"* Fr equency "Frequency" Spectrum Analyzer & Clock "S.
18 | English General fea tures The text display in the L ower text display part In T uner source Information Display Indicator "Sta tus" Spectrum Analyzer & Clock "Speana/Clock".
English | 19 T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " TUNER" display . 2 Select the band Push the Contr ol knob towards [FM] or [ AM]. Each time you push the knob toward [FM], it switches between the FM1, F M2, and FM3 bands.
20 | English Station Pr eset Memory Putting a station in the memory. 1 Select the band Push the Contr ol knob towards [FM] or [ AM]. 2 Select the frequency to put in the memory Push the Contr ol knob towards [ 4 ] or [ ¢ ]. 3 Put the frequency in the memory Press the desired [1] — [6] butt on for at least 2 seconds.
English | 21 F unction of LX BUS T elevision TV T uning Selecting the TV channel of a connected LX BUS T elevision (optional accessory). The action depends on the setting of the connected LX BUS T elevision. Refer to the user instruction of the LX BUS T elevision for details.
22 | English CD/USB device/A udio file/External disc control f eatures Playing CD & A udio file When a disc is inserted Press the [SRC] button. Select the "Compact Disc" display. • When a CD is inserted, the "IN" indicator is ON.
English | 23 Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display Disc player "CD Changer" CD changer "MD Changer" MD changer Pause and play Press the C ontrol knob.
24 | English F unction of remote control Direct T rack/File S earch Doing T rack/File Search b y entering the track/file number . 1 Enter the track/file number Press the number buttons on the r emote control. • Y ou can select Direct File Search up t o 999.
English | 25 F unction of Audio file All Random Play Playing randomly from all of the Audio files recorded in the media. Press the [ A.RDM] button for at least 1 second. When the random mode is ON, " All Random ON" is displayed. Cancelling the A ll Random Play Press the [ A.
26 | English F unction of Audio file Folder Select 2 mode Select the target folder within the folders containing audio files. The folder which contains playable audio files is only displayed . 1 Enter Folder Select 2 mode Press the [F .SEL] button. Select the "FOLDER SELEC T2" display .
English | 27 F unction of ACDrive media Switching the Pla y mode Arrange the playing orders of the songs by categories. Press the [S.MODE] button. Each time you press the button, the P lay mode alternates between the modes shown in the table below . Play mode Category which is to be arranged "PlayList Mode" Play list or der .
28 | English Menu system Menu Sy stem Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference f or the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button f or at least 1 second.
English | 29 In Standby mode Activating Security C ode Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is requir ed to turn on the audio unit when it is removed fr om the vehicle.
30 | English In Standby mode Manual Clock Adjustment 1 S elect Clock Adjustment mode Push the Contr ol knob towards [FM] or [ AM]. Select the "Clock Adjust" display . 2 Enter Clock Adjust mode Press the C ontrol knob for at least 1 second. The clock display blinks.
English | 31 Display Illumination C ontrol This function turns off the display when you perform no operation for 5 seconds. This func tion is effective when you are driving at night. Display Setting "Display : ON" Keeps the display on. "Display : OFF" T urns off the display when you perform no operation for 5 seconds .
32 | English Select the " AMP Control" display . 2 Enter AMP Control mode Press the C ontrol knob for at least 1 second. 3 S elect the AMP Control item for adjustmen t Push the Contr ol knob towards [FM] or [ AM]. • For the details on the A MP Control item, see the Instruction manual attached to the LX AMP .
English | 33 • The Auxiliary input display can be set only when the auxiliary input of optional KCA-S210A is used. • When operation stops for 10 seconds the name at that time is register ed, and Name Set mode closes.
34 | English In CD/ USB mode A CDrive firm ware v ersion display Displaying the firmwar e version with the ACDrive function. 1 S elect the firmware v ersion display mode Push the Contr ol knob towards [FM] or [ AM]. Select the " ACD F/W V ersion" display .
English | 35 Basic Operations of r emote contr ol Loading and Replacing the battery Use two " AA "/ "R6"-size batteries. Slide the cover while pr essing downwards to remove it as illustrated . Inser t the batteries with the + and – poles aligned properly , following the illustration inside the case .
36 | English Basic Operations of r emote contr ol Audio C ontrol [A UD] button Selects the Audio item to be adjusted. [VOL] buttons Adjusts the Audio item. • Refer to <Audio C ontrol> (page 11) for the operation method, such as the procedures f or Audio control and others operations.
English | 37 Ac cessories/ Installation P rocedure Ac cessories 1 ..........1 2 ..........1 3 ..........6 4 ..........6 5 ..........1 Installation Proc edure 1. T o prevent a short circuit, remove the key from the ignition and disconnect the - battery.
38 | English Connecting W ires to T erminals AUX IN SUB WOOFER – + P.CONT MUTE ANT. CONT ILLUMI FRONT L FRONT R REAR L REAR R EXT. CONT FM/AM antenna input Fr ont left output ( White) Fr ont right o.
English | 39 Installation When per forming a check of the CD operation prior to installation, place this unit in a horizontal position and per form a loading/eject of the CD . When a ground wire is included in the wiring kit (which is sold separately), fasten the ground wir e with the binding screw located on the rear panel of this unit.
40 | English T roubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice, first check the following table f or possible problems. General ? The pow er does not turn ON.
English | 41 T uner source ? Radio reception is poor . ✔ The car ant enna is not extended. ☞ Pull the antenna out all the way . ✔ The ant enna control wire is not connected. ☞ Connect the wire correctly, r eferring to the section on <Connecting Wir es to T erminals>.
42 | English Audio file sourc e ? Cannot play an A udio file. ✔ The media is scrat ched or dir ty. ☞ Clean the media, referring to the CD cleaning of the section on <About CDs> (page 6). ? The sound skips when an Audio file is being played .
English | 43 Mecha Error: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason. ➪ Check the disc magazine. And then press the reset button on the unit. If the "Mecha Error" code does not disappear , consult your nearest service center .
44 | English FM tuner section Fr equency range (50 kHz space) : 87.5 MH z – 108.0 MHz (200 kHz space): 87.9 MH z – 107.9 MHz Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 μV /75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.2dBf (1.6 μV /75 Ω) Fr equency response (±3.
デバイスKenwood DPX-MP7090Uの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Kenwood DPX-MP7090Uをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKenwood DPX-MP7090Uの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Kenwood DPX-MP7090Uの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Kenwood DPX-MP7090Uで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Kenwood DPX-MP7090Uを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKenwood DPX-MP7090Uの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Kenwood DPX-MP7090Uに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKenwood DPX-MP7090Uデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
