KenwoodメーカーKAF-S500の使用説明書/サービス説明書
ページ先へ移動 of 36
About the supplied remote control Compared to standard remote controls, the remote control supplied with this amplifier has several operation modes. These modes enable the remote control to control other audio/video components.
2 EN Units are designed for operation as follows. U.S.-Military .................................................... AC 110 - 240 V Before applying the power Caution : Read this page carefully to ensure safe operation. Safety precautions W ARNING : TO PREVENT FIRE OR ELECTRIC SH OCK, DO NO T EXPOSE THIS APPLIANCE T O RAIN OR MOISTURE.
3 EN Before applying the power Special features True home theater sound This amplifier incorporates a wide variety of surround modes to bring you maximum enjoyment from your video software.
4 EN Before applying the power .............................. 2 How to use this manual ..................................... 2 Unpacking .......................................................... 2 Safety precautions ..................................
5 EN IMPORT ANT SAFEGUARDS 6. Temperature – The appliance may not function properly if used at extremely low, or freezing temperatures. The ideal ambient temperature is above +5°C (41°F).
6 EN EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) NEC – NATIONAL ELECTRICAL CODE GROUNDING CONDUCTORS (NEC SECTION 810-.
7 EN Names and functions of parts Main unit 1 (POWER) key % Use to turn the main power on or off. STANDBY indicator Lights when stand by mode. 2 INPUT SELECTOR knob * (DVD/CD, VIDEO 1, VIDEO 2, FRONT AUX) Use to select input sources. 3 VOLUME CONTROL knob * 4 ACTIVE EQ key ( Use to select ACTIVE EQ’s setting.
8 EN Names and functions of parts Remote control unit This remote control unit can be used not only for Kenwood products but also for other non-Kenwood products by setting the appropriate manufacturer’s setup codes.
9 EN Make connections as shown in the following pages. When connecting the related system components, be sure to refer to the instruction manuals supplied with the components you are connecting. Do not connect the power cord to a wall outlet until all connections are completed.
10 EN Connecting audio components Setting up the system OPT 1 OPT 2 OUT IN DVD/CD IN- VIDEO 2 IN VIDEO 1 R R L L R L To AC wall outle t OUT IN OUT Video output (Yellow RCA pin cords) Video input (Yellow RCA pin cords) Audio inputs and outputs DVD player (e.
11 EN Connecting the speakers ( for HTB-S500 system) Connect terminals of same color between rear panel and speakers. Also use speaker cord which have same colored tube as terminal.
12 EN Setting up the system Connecting the speakers ( for KAF-S500 ) SUB/W BS L R L R REAR CENTER FRONT SUB WOOFER Right Left Right Left Recommend to connect Subwoofer to this terminal but if you wish to connect to a Back Surround speaker with the SETUP of "6CH BS", use this terminal.
13 EN Setting up the system Connecting the terminals 1 Strip coating. 2 Push the lever. 3 Insert the cord. 4 Release the lever. • Never short circuit the + and – speaker cords.
14 EN PH O NE S AUX OPTICAL PTI T L - AUDIO - R L - AU DIO - R Setting up the system Connecting to the FRONT AUX jacks The FRONT AUX jacks are convenient for connection of video components such as a camcorder or a video game. • To select the source connected to the FRONT AUX jacks select FRONT AUX key.
15 EN Preparing for surround sound Speaker settings To enable you to obtain optimum enjoyment from the amplifier’s listen- ing modes, make sure to complete the speaker settings (subwoofer, front, center, surround and surround back speakers) as described below.
16 EN ! Press the SET UP key again to accept the setting. • The subwoofer remix setting indication ”REMIX” appears. • If subwoofer is turned off, subwoofer re-mix setting is not visible. @ Use the TRIM % / fi keys to select the appropriate subwoofer re-mix setting.
17 EN • Press the FRONT key each time to select Front L or Front R channel. • Press the CENTER or SW key to select center or subwoofer channel. • Press the REAR key to select surround channel. And use the REAR key for the following displays. 1 LS : Surround L channel.
18 EN Preparing for playback Some preparatory steps are needed before starting playback. Turning on the amplifier 1 Turn on the power to the related components.
19 EN Normal playback Adjusting the sound Adjusting the TONE You can adjust the sound quality when the receiver is in the PCM stereo mode, analog stereo mode. 1 Press the SOUND key to select the SOUND mode. When input signal is Dolby Digital and STEREO 1 T.
20 EN Recording audio (analog sources) Recording a music source 1 Use the INPUT SELECTOR knob (or INPUT SELECTOR keys) to select the source (other than “VIDEO 1”) you want to record. • Connect analogue audio outputs to this Amplifier. 0 2 Start playback, then start recording.
21 EN This receiver is equipped with listening modes that allow you to enjoy an enhanced sonic ambience with a variety of video sources. In order to obtain the optimum effect from the surround modes, make sure to input the proper speaker settings beforehand.
22 EN Dolby Digital EX Dolby Digital EX is an extension of Dolby Digital technology, Dolby Digital EX creates six full-bandwidth output channels from 6.1-chan- nel sources. This is done using a matrix decoder that derives three surround channels from the two in the original recording.
23 EN Surround play The DTS compatible models can reproduce a CD, DVD, or LD carrying the DTS mark. DOLBY DIGITAL can be used when playing DVD or LD software bearing the mark and DOLBY DIGITAL format digital broadcasts (etc.). DOLBY PRO LOGIC can be used when playing video, DVD, or LD software bearing the mark.
24 EN Ambience effects 1 Select STEREO mode using LISTEN MODE key. £ 2 Press the SOUND key twice. 3 Use the TRIM %¥fi keys to select ON or OFF. 1 T.SURR ON : SRS TruSurround ON. 2 T.SURR OFF : SRS TruSurround OFF. 4 Press the SOUND key to return to the input indication.
25 EN Adjustment of each channels’ level You can adjust each channel’s level duning listening music. 1 Press the FRONT key to adjust FRONT L channel’s level. 2 Use the TRIM % / fi keys to adjust the sound level. 3 Press the FRONT key to adjust FRONT R channel’s level.
26 EN The remote control supplied with this amplifier is also capable of controlling components from a variety of manufacturers once you register the appropriate setup codes into the remote control unit.
27 EN Operating other components This operation lets you operate the registered components. 1 Use the INPUT SELECTOR keys to select the component you desire. • Pressing the INPUT SELECTOR keys also changes the input selector on the amplifier. 2 Press the SOURCE key.
28 EN Basic remote control operations for other components Setup code chart TV setup codes Maker Setup codes Maker Setup codes AOC 000, 001 ADMIRAL 031, 041 AIKO 014 AKAI 001 ALARON 026 AMBASSADOR 024.
29 EN Basic remote control operations for other components TV setup codes Maker Setup codes Maker Setup codes ADMIRAL 021, 027, 077 ADVENTURA 006 AIKO 025 AIWA 005, 006 AKAI 002, 070 AMERICA ACTION 02.
30 EN RCA 004, 008, 013, 019, 023, 027 077 RADIO SHACK 006 RADIX 005 RANDEX 005 REALISTIC 004, 005, 006, 011, 012, 017 027, 077 RUNCO 007 STS 008 SAMSUNG 010, 023, 070, 084 SANKY 007, 027, 077 SANSUI .
31 EN Maker Setup codes ALPHASTAR 065, 093 CHAPARRAL 058 ECHOSTAR 066 EXPREEVU 066 GENERAL INSTRUMENT 072, 073, 075, 087 HTS 066 HITACHI 068 HUGHES NET.
32 EN Basic remote control operations for other components Other components’ operations Refer to the following for the type of remote control operations available for each component. • When pressing keys in succession, press each key firmly and be sure to wait at least 1 second before pressing the next key.
33 EN Basic remote control operations for other components Satellite operation keys Cable operation keys DVD player operation keys Notes 1. Certain codes may only operate some of the function available on a given model. 2. The above show the typical type functions available for each component.
34 EN In case of difficulty Amplifier Cause • The speaker cords are disconnected. • VOLUME is set to the minimum position. • MUTE is ON. • Speaker cords are short-circuited. • The speaker cord is disconnected. • The surround speaker cords and/or the center speaker cord is disconnected.
35 EN Notes 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
36 EN For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.
デバイスKenwood KAF-S500の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Kenwood KAF-S500をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKenwood KAF-S500の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Kenwood KAF-S500の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Kenwood KAF-S500で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Kenwood KAF-S500を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKenwood KAF-S500の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Kenwood KAF-S500に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKenwood KAF-S500デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
