KenwoodメーカーKDC-W5137の使用説明書/サービス説明書
ページ先へ移動 of 36
CD-RECEIVER KDC-W5137 KDC-W5137Y INSTR UCTION MANU AL © B64-3760-00/00 (E0/E20) B64-3760-00_00.indd 1 B64-3760-00_00.indd 1 06.12.11 0:35:39 PM 06.12.
2 | English Con tents Safety precautions 3 Notes 4 General featur es 7 Pow er Selecting the Source Volume Attenuator Audio Control Audio Setup Bass Boost Speaker Setting Switching Display Subwoofer Ou.
English | 3 Safety precautions 2 W ARNING T o prev ent injury or fire, take the follo wing precautions: • T o prevent a short circuit, never put or leave an y metallic objects (such as coins or metal tools) inside the unit. • Mounting and wiring this product requires skills and experience.
4 | English Notes • If you experience problems during installation, consult your Kenwood dealer . • When you pur chase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • The characters which can be displayed by this unit are A-Z 0-9 @ " ‘ ` % & * + – = , .
English | 5 About Audio file • Playable Audio file AAC (.m4a), MP3 (.mp3), WMA (.wma) • Playable disc media CD-R/R W/ROM • Playable disc file forma t ISO 9660 Level 1/2, Joliet, Romeo , Long file name.
6 | English Notes About DAB T uner control Refer to A gr oup on the Instruc tion manual of DAB T uner K TC-9090D AB (optional accessor y) for the control method of DAB Tuner function.
English | 7 General fea tures Powe r T urning ON the P ower Press the [SRC] button. ⁄ • When the power is ON, the <Security Code> (page 20) is displayed as "CODE ON" or "C ODE OFF" . T urning OFF the P ower Press the [SRC] button for at least 1 sec ond.
8 | English General fea tures Attenua tor T urning the volume down quickly . Press the [ A T T ] button. Each time you press the button, the Attenuat or turns ON and OFF . When the Attenuator is ON, the " A T T" indicator blinks. Audio C ontrol 1 Select the source to adjust Press the [SRC] button.
English | 9 Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standb y Press the [SRC] button. Select the "ST ANDBY " display . 2 Enter Speak er Setting mode Press the [VOL] knob. 3 Select the Speaker type T urn the [ VOL] knob.
10 | English General fea tures Theft Deterrent F aceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the F aceplate 1 Pr ess the Release button. Drop open the faceplate. 2 Dra wing the faceplate to left side pull it to forward and remov e it.
English | 11 T uner features T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " TUNER" display . 2 Select the band Push the Contr ol knob towards [FM] or [ AM]. Each time you push the knob toward [FM], it switches between the FM1, F M2, and FM3 bands.
12 | English T uner features F unction of remote control Direct Acc ess T uning Entering the frequency and tuning. 1 Select the band Press the [F M] or [AM] button. 2 Enter Direct Ac cess T uning mode Press the [DIRECT ] button on the remote control. "– – – –" is displayed.
English | 13 RDS featur es T raffic Information Changing to traffic information automatically when a traffic bulletin starts even when you are not listening to the radio . Press the [TI] button. Each time you press the button, the Traffic information function turns ON and OFF .
14 | English RDS featur es Progr am T ype preset Putting the Pr ogram Type in the P reset button memory and quick recall. Presetting the Progr am T ype 1 Select the Program T ype to preset Refer to <PTY (Program Type)> (page 14). 2 Preset the P rogram T ype Press the desired [1] — [6] butt on for at least 2 seconds.
English | 15 Changing Language for PTY F unc tion Selecting the Program T ype display language. 1 Enter PTY mode Refer to <PTY (Program Type)> (page 14). 2 Enter Changing Language mode Press the [TI] button. 3 Select the language Push the Contr ol knob towards [FM] or [ AM].
16 | English CD/Audio file/External disc contr ol features Playing CD & A udio file When there is no disc inserted 1 Drop open the fac eplate Press the Release button. 2 Insert a disc. 3 Push the fac eplate on the left side, and return it to its former position.
English | 17 Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display Disc player "CD CH" CD changer "MD CH" MD changer Pause and play Press the C ontrol knob.
18 | English CD/Audio file/External disc contr ol features T rack/File/Disc/F older Repeat Replaying the song, disc in the Disc changer or Audio file folder y ou are listening to . Press the [REP] button. Each time you press the button, the Repeat P lay alternates between the modes shown in the tables below .
English | 19 F unction of Audio file Folder Select Quickly selecting the folder you want to hear . 1 Enter F older Select mode Press the [F .SEL] button. "FLD SEL " is displayed. During Select mode the folder information is displayed as shown below .
20 | English Menu system Menu Sy stem Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button f or at least 1 second.
English | 21 ⁄ • When you activate the Security Code function, it cannot be released. Note, your Security Code is the 4 digit number enter ed in your "Car Audio P assport" in this pack age. 1 Enter Standb y Press the [SRC] button. Select the "ST ANDBY " display .
22 | English Menu system In Standby mode Synchr onize Clock Synchronizing the RDS station time data and this unit’ s clock. Display Setting "SYNC ON" Synchr onizes the time. "SYNC OFF" Adjust the time manually . ⁄ • It takes 3 to 4 minutes to synchronize the clock.
English | 23 In Audio file source Supreme Setting When AAC, MP3 or WMA files encoded at a low bit rate (less than 96kbps (fs=32k, 44.1k, 48kH z)) are played, this function restor es their high frequency region to approach the sound quality of equivalents of these files encoded at a high bit rate .
24 | English Menu system Restricting RDS Region (Region Restrict Function) Y ou can choose whether or not to restrict the RDS channels, receiv ed with the AF function for a particular net work, to a specific region. Display Setting "REG ON" The Region Restrict Function is ON.
English | 25 T ext Scroll Setting the displayed text scroll. Display Setting "SCL MANU" Doesn’ t scroll. "SCL AUT O" Scrolls when the display changes .
26 | English Basic Operations of r emote contr ol Accessory of KDC-W5137Y Loading and Replacing the battery Use two " AA "/ "R6"-size batteries. Slide the cover while pr essing downwards to remove it as illustrated . Inser t the batteries with the + and – poles aligned properly , following the illustration inside the case .
English | 27 Audio C ontrol [A UD] button Selects the Audio item to be adjusted. [VOL] buttons Adjusts the Audio item. ⁄ • Refer to <Audio C ontrol> (page 8) for the operation method, such as the procedures f or Audio control and others operations.
28 | English Ac cessories/ Installation P rocedure Ac cessories 1 ..........1 2 ..........2 3 ..........1 4 ..........2 5 ..........1 6 ..........1 Installation Proc edure 1. T o prevent shor t circuits, r emove the key from the ignition and disconnect the - terminal of the battery.
English | 29 Connecting W ires to T erminals MUTE P .CONT ANT CONT 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 REMO.CONT Battery wire ( Y ellow) Ignition wire (Red) FM/AM antenna input Antenna Cord (ISO) Antenna Conversion A daptor (ISO–JASO) (Accessory 3 ) T o connect the Kenwood navigation system, consult your navigation manual.
30 | English Connecting W ires to T erminals Connector F unc tion Guide Pin Numbers for ISO Connectors Cable Colour Functions External Power Connector A-4 Y ellow Battery A-5 Blue/White Power Control .
English | 31 Installation Fir ewall or metal suppor t Screw (M4X8) (commercially available) Self-tapping screw (commercially available) Metal mounting strap (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
32 | English Removing the hard rubber fr ame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. Catch Lock Accessory 2 Removal tool 2 When the upper level is removed , remove the lower two locations.
English | 33 Some functions of this unit may be disabled by some settings made on this unit. ! Cannot switch to A ux source. ▲ AUX is not turned on. ☞ <Built-in Auxiliary input Setting> (page 25) ! Cannot displa y the user of System Q . ▲ <Audio Control> (page 8) is not set.
34 | English The messages shown belo w display your systems condition. EJEC T: • No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. • No CD in the unit. NO DISC: No disc has been loaded in the disc magazine.
English | 35 Specifications FM tuner section Fr equency range (50 kH z space) : 87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) : 0.7 μV /75 Ω Quieting Sensitivity (S/N = 46dB) : 1.
B64-3760-00_00.indd 36 B64-3760-00_00.indd 36 06.12.11 0:35:53 PM 06.12.11 0:35:53 PM.
デバイスKenwood KDC-W5137の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Kenwood KDC-W5137をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKenwood KDC-W5137の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Kenwood KDC-W5137の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Kenwood KDC-W5137で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Kenwood KDC-W5137を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKenwood KDC-W5137の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Kenwood KDC-W5137に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKenwood KDC-W5137デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
