KenwoodメーカーKDC-X617の使用説明書/サービス説明書
ページ先へ移動 of 52
KDC-X617 KDC-V6017 KDC-516S KDC-57MR © B64-1876-00 (KW) COMPACT DIGITAL AUDIO Take the time to read through this instruction manual. Familiarity with installation and operation pro- cedures will help you obtain the best perfor- mance from your new CD-receiver.
— 2 — English Contents Safety precautions Warning ........................................................................................................3 Safety precautions ........................................................................
— 3 — 2 Warning Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety.
— 4 — English Safety precautions To prevent injury or fire, take the following precautions: • Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when jolted. • When extending the ignition, battery, or ground wires, make sure to use automotive-grade wires or other wires with a 0.
— 5 — • If you experience problems during installation, consult your Kenwood dealer. • Press the reset button if the disc auto changer is first controlled and operates incorrectly. The original operating condition will return. • We recommend the use of the Security Code function (see p.
— 6 — English Handling Compact discs Playing a CD that is dirty, scratched or warped can cause the sound to skip and the unit to operate incorrectly, resulting in worsened sound quality. Take the following precautions to prevent your CDs from getting scratched or damaged.
— 7 — Do Not Load CD Accessories Do not use commercially available CD accessories that can be loaded into the CD slot, such as stabilizers, protective sheets, or CD cleaning discs, since they can cause the unit to malfunction. Removing the CD Only remove the CD from the machine in a horizontal direction, holding it flat.
Switching Modes: Each time you press the SRC (source) button, the mode switches as follows: Selecting standby mode: Press the SRC button repeatedly and switch to "ALL OFF" . When "ALL OFF" is displayed, the standby mode is activated.
Function of the KDC-X617 You can turn the non-fading output on and off. Turning non-fading output On/Off : Press the NF button for at least one second to set the function ON or OFF. "NF ON" is displayed when the non-fading output is set ON. Non-Fading Output This function amplifies low and high tones when the volume is turned down.
Do not set the right side of the faceplate in the faceplate bracket first, when reattaching the faceplate. Doing so may cause the connector on the faceplate bracket to malfunction. Press the right side of the faceplate until it locks. Hiding the control panel: Press the release button and slide open the faceplate.
Speaker setting allows the System Q settings to be fine-tuned according to the type of speakers. Woofer setting allows for Network configuration according to the type of subwoofers. Press the SRC button repeatedly to select the standby mode. "ALL OFF" is displayed when the standby mode is selected.
Audio control features Changing the Clock Display: Each time you press the CLK button, the display switches between the clock and each mode display. The clock indicator lights while the clock is displayed.
Function of the KDC-X617 Switch the Bass Extend mode on/off. Display and setting: "Bass EXT" : ON / OFF (When the bass extend mode is set to on, low frequency response is extended by 20%.) Bass Extend Function of the KDC-X617 Adjust the Bass quality factor.
Function of the KDC-X617 Adjust the Non-fading output level. Display and setting: "NF Level" : - 15 – + 15 Non-Fading Level Adjust the fader level. Display and setting: "Fader" : Rear 15 – Front 15 Fader Level Adjust the balance level.
Set the sound level of the each source selected by adjusting the level difference between the basic sound level and the required level. Display and setting: "V Offset"/"VOL Offset" : - 8 – ±0 Volume Offset Function of the KDC-X617 Adjust the phase for Non-Fading output.
You can choose from three tuning modes: auto seek, preset station seek, and manual. The AUTO 1 indicator lights up when auto seek tuning is selected, and the AUTO 2 indicator lights when preset station seek tuning is selected. Selecting Tuning Mode: Press the AUTO button.
You can automatically store all the receivable frequencies in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available.
You can change the display used when listening to the radio. Changing the Display: Each time you press the DISP button, the display changes as Switching Display for Tuner Continue steps 3 and 4 until all the characters are chosen for the name. You can enter up to eight characters for each name.
CD/External disc control features follows: Station frequency SNPS name (only when being preset) — 19 — SCAN RDM REP DISP/ NAME.S M.RDM AM 0 FM 4¢ 38 SRC KDC-X617/KDC-516S/KDC-57MR KDC-V6017 IN indicator IN indicator Disc number Track time Track number Disc number Track time Track number Release button KDC-X617_U.
This function permits the connection of optional players and the playing of discs other than the loaded CD (in the current unit). Playing Discs: Press the SRC button repeatedly to select the external disc control mode. The disc will start playing. The external disc control mode will differ, depending on the unit that is connected.
Search forward or backward through the tracks on the disc until you reach the one that you want to listen to. Making a Reverse Track Search: Press the 4 button to display the desired track number. Press once to search back to the beginning of the current track, twice to search back to the beginning of the previous track, and so forth.
Play all the tracks on the current disc in random order. Press the RDM button to switch random play on and off. "Random ON" is displayed when random play is turned on. The track number will change over and over in the display as the next track is being selected.
Pressing the DISP button for at least one second results in one scrolling display of the titles. • Please see the menu settings (page 31) about switching between manual scrolling and automatic scrolling. • Only units with a CD text feature permit title display.
(except for KDC-C560) are connected, you can directly input letters using the number/letter entry buttons on the remote. Example: Use the following table to enter the name "DANCE". Continue steps 3 and 4 until all the characters are chosen for the name.
Using the remote, directly input the track number that you want to listen to. Using the number buttons on the remote, input the number of the track that you want to listen to.
Menu settings Using the remote, directly input the disc number that you want to listen to. Using the number buttons on the remote, input the number of the disc that you want to listen to. The selected disc number will blink in the display for 10 seconds.
You can set the defaults for additional functions in the menu mode. Make a setting for each function, referring to the following operations. Enter the menu mode Press the MENU button for at least one second. "MENU" is displayed when the menu mode is entered.
Press the DISP button for at least three seconds. The security code will be set. "RE-ENTER" will appear in the display for one second, asking you to enter the code once again for confirmation. When "CODE" appears in the display, you can start inputting the code.
This function allows you to turn off the lower part of the display if there is too much information in the display. Display and setting: "Graphic ON" : The display will turn on by using the whole part of the display.
You can dim the display. The dimmer function is not available for units if the dimmer wire is not connected. Display and setting: "Dimmer ON" : The dimmer setting is on. (Default setting) "Dimmer OFF" : The dimmer setting is off. NOTE Dimmer This adjustment permits easy viewing of the display.
This function permits the CD text and MD title to be scrolled and the entire text to be displayed. Switching between manual scrolling and automatic scrolling is permitted.
Do not set the remote on hot places such as above the dashboard. Loading and Replacing the Batteries: Use two "AAA"-size batteries. Slide the cover while pressing downwards to remove it as illustrated. Insert the batteries with the + and – poles aligned properly, following the illustration inside the case.
• 4 / ¢ (TUNE) buttons Press the 4 button to make decreasing seeks (using the preset tuning mode). Press the ¢ button to make increasing seeks (using the preset tuning mode). Use to move the cursor left or right during station name input. • AM/FM buttons Press the AM button to select the AM band.
• 4 / ¢ buttons Press the 4 button to search through the tracks backward. Press the ¢ button to search through the tracks forward. Use to move the cursor while entering disc name. • DISC buttons (for disc changers) Press the DISC – button to search through the discs backward.
— 35 — The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. 2 CAUTION ..........................................1 ....................
English — 36 — Connecting Wires to Terminals ANT. CONT. ILLUMI EXT.CONT. P.CONT. + + + + FRONT • L FRONT • R REAR • L REAR • R – + FRONT NON FADING REAR When only two speakers are being .
— 37 — Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). NOTE Accessory 2 Metal mounting strap Self-tapping screw (commercially available) Firewall or metal support Accessory 6 Installation ■ Installation 6 mm MAX.
English — 38 — Installation Removing the hard rubber frame ■ When the upper level is removed, remove the lower two locations. 3 The frame can be removed from the bottom side in the same manner. NOTE Catch Lock Refer to the section “ Theft deterrent faceplate (P.
— 39 — Accessory 7 If you want to lock the faceplate to the unit so that it does not fall off, follow the directions below. Refer to the function "Theft Deterrent Faceplate" (page 10) and remove the faceplate.
English — 40 — What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. Troubleshooting Guide SOLUTION POSSIBLE CAUSE PROBLEM One of the speaker wires is being pinched by a screw in the car.
SOLUTION POSSIBLE CAUSE PROBLEM Free switching of the sound quality. The system Q function is set on Scan mode. Refer to the “ System Q ” page and switch it to a function other than Scan mode. (see p. 11). Can ’ t remove disc. The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF.
English — 42 — If the following situations, consult your nearest service center: • Even though the disc changer is connected, the Disc Changer Mode is not on, with "AUX" showing in the display during the Changer Mode.
— 43 — If this indicator blinks, the CD player is malfunctioning. ] Eject the CD and try inseting it again. If the CD cannot be ejected, press the eject button and hold it in until the CD is ejected. IN The following messages are displayed when certain problems are occurring in your system.
English — 44 — FM tuner section Frequency range (200 kHz space) ............87.9 MHz – 107.9 MHz Usable sensitivity (S/N = 30dB) .................... 9.3dBf (0.8 µV/75 Ω ) Quieting Sensitivity (S/N = 50dB) ............... 15.2dBf (1.6 µV/75 Ω ) Frequency response ( ± 3 dB) .
KDC-X617_U.S 00.12.26 1:07 PM Page 45.
You cannot presetrng disc names on a CD where CD text IS contarned while thus unrt IS controlling a CD changer “KDCC665”. “KDC-C465”. “KDC-C662”, or “KDC-C462” 1 UWAGA ) Nie mozesz zap.
Table of Contents U.S.A. _ Australia Canada Military Belgtque et Grand-duche de Luxembourg Danmark Deutschland Nederland Portugal U.K. & Ireland dsterrerch Ellis Espafia France ltalia Suomr Andorr.
This warranty will be honored only in the U S A KENWOOD LIMITED WARRANTY FOR CAR STEREO COMPONENTS HOW LONG IS THE WARRANTY Kenwood U S A Corporation (“Kenwood”) warrants this product for a period.
W KDC-X617 II 1111 II Ill lllllllllll 019048 12 d‘ acquieto r &me of set / Nom de I’appareil I Modello deli’apparecchio i Modelo Sales dete I Date d’ schat / Data I Fecha de venta ,. Dealer stamp / Cachet du vendeur / Sello del vendedor I1111111 6740 Signature of Dealer/ Signature du veodeuri Firma del vendedor .
.
Please send otlier correspondence to: Kenwood USA Customer Service P.O. Box 22745 Long Beach, CA 90801-5745 NECESSARY Register your on the web or by mail excelon.
KENWOOD 2 110Mr 2 0 Mm 3 0 MS 4 0 Miss 87SOl-01 First Name Initial Last Name Street AM. No. City Stale ZIP Code E-mail Address: 6 7 8 9 10 11 12 Model number: Serial number: Date 01 purchase: / / Name.
デバイスKenwood KDC-X617の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Kenwood KDC-X617をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKenwood KDC-X617の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Kenwood KDC-X617の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Kenwood KDC-X617で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Kenwood KDC-X617を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKenwood KDC-X617の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Kenwood KDC-X617に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKenwood KDC-X617デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
