KenwoodメーカーKNA-DV3100の使用説明書/サービス説明書
ページ先へ移動 of 60
D VD NA VIGA TION SYSTEM KNA-D V3100 INSTR UCTION MANU AL © PRINTED IN JAP AN B64-2615-00/02 (K) KNA-DV3100(K)_ENG r7 03.7.7 5:34 PM Page 1.
2 English English Contents Before Use .................................................3 Replacing Map Discs .................................4 Inserting the Map Disc ................................................4 Removing the Map Disc ............
English 3 Before Use ■ Wa rning Messages For safe usage please observe the following !!! READ THIS MANUAL FIRST Read this manual carefully before starting to operate the Kenwood Car Navigation System and follow the manual's instructions.
4 English English Replacing Map Discs 1 Slide the front cover downward to open the disc- insertion slot. 2 Insert the map disc (facing upward) and close the front cover . 1 Slide the front cover downward to open the disc- insertion slot. 2 Press the eject button.
English 5 Starting Up Navigation Start up navigation and display the map of the area around your vehicle. 1 Tu rn on the car engine. The Opening screen appears, followed by the CAUTION screen. 2 Read CAUTION carefully , and select . The Current Position screen appears.
Language Selection Y ou can change the language of the menu and the voice guidance. 1 Select . 2 Select (Language Selection). 3 Select your preferred language from the list. : Displays up to five previous items. : Displays the previous item. : Displays the next item.
English 7 Markers (and Controls) Displayed on Maps <Current Position screen> <Scroll screen> Scroll the map Screens Before Setting Route Select the screen (5 seconds) Screens During Route Guidance 1 T ime display Displays the current time.
8 English English Destination Entry Address page 14 Point of Interest page 17 Select from Map page 18 Emergency page 20 Memory Point page 16 Previous Destination page 18 Intersection page 22 Freeway Ent/Exit page 19 Phone number page 23 Coordinates page 21 Stored Locations Memory Points page 43 A void Area page 47 Dest.
English 9 Map Operations Either the direction in which you are headed or north can be shown as upwards on the map. 1 Select or . Selecting rotates the map to so that direction you are heading is alway.
10 English English Map Operations Y ou can increase or decrease the scale of the map. 1 Select or to change the map scale. Selecting or changes the scale of the map as shown left.
English 11 Set Route Setting Destination by Scrolling the Map Y ou can set the destination or way point if the exact address not known. 1 T ouch the screen to scroll the map until is at the destination point or way point. 2 Select (Destination or Way Point).
12 English English Set Route ■ Selecting route When the destination set, it is simultaneously calculated for three types of route (Quick, Normal, and Short).
English 13 Setting Destination from the Navigation Menu Y ou can set the destination using various ways provided by the system. 1 Select . 2 Select (Destination Entry).
14 English English Set Route ■ Address 1 Input a house number and select . 2 Enter the street name. If the some letters of a street name are entered, the desired street can then be selected from the displayed list. : Selecting this deletes the character that was last entered.
English 15 6 Select (Destination) to set the address as your final destination. Route calculation will be carried out and the entire route will be displayed on the map. Select (Way Point) to set the address as a way point on your route. Y ou can set up to 5 way points per trip.
16 English English Set Route ■ Memory Point If you have stored a memory point, you can make it the destination. 1 Select the category for the desired memory point. 2 Select the desired Memory Point. : Displays up to five previous suggestions. : Displays the previous suggestions.
English 17 ■ Home/Stored Destination If you have already stored your home address, you can set this as your destination. Similarly , if destinations are stored in advance, they can be selected as the current destination in a one-touch operation. 1 Select (Home) or destinations through .
18 English English Set Route ■ Previous Destination This lets you choose one of the most recent 100 destinations or way points and make it your new destination. 1 Select the Previous Destination from the list. : Displays up to five previous suggestions.
English 19 ■ Freeway Entrance/Exit Y ou can find the name of a freeway entrance or exit from those listed and make it your destination or way point. 1 Enter the name of the freeway and select . 2 Select the name of the freeway you want. : Displays up to five previous suggestions.
20 English English Set Route ■ Emergency This function allows the nearest police station or hospital to be set as the destination. 1 Select either or . The nearest police stations or hospitals will be displayed accordingly . 2 Select the desired institution from the list.
English 21 ■ Coordinates This function allows destinations to be set using latitude and longitude. 1 Enter the latitude. This can be done using the number keys in combination with [°] (degrees), [‘] (minutes), and [“] (seconds). 2 Enter the longitude.
Set Route ■ Intersection Designate the intersection with 2 street names, and search for the place you want. 1 Enter the 1st street, and select . 2 Select the street you want from the list . : Displays up to five previous suggestions. : Displays the previous suggestions.
English 23 ■ Phone number This function allows buildings and the like to be located using their phone number . 1 Enter the phone number starting with the area code. 2 Select . 3 Select (Destination) or (Way Point). If a number of candidates exist as a result of, for example, different area codes, these will be displayed in a list.
24 English English Route Guidance While driving along during route guidance, the directions for the next junction where you have to turn are shown as a T urn Arrow or T urn List. 1 Select (Screen configuration). 2 Select either (T urn Arrow) or (T urn List).
English 25 It is possible to perform two-screen display of maps. 1 Select (Screen configuration). 2 Select (Dual map). If you wish to return to one-screen display , select (Single map). If no items are to be selected, the screen can be closed by selecting .
26 English English Route Options During route guidance you can change the route options, stop or check the route. 1 Select . 2 Select (Route Options). The Route Options screen appears. (Search conditn): Set the method for route calculation between locations.
English 27 Search Condition Y ou can set the conditions and the mobile navigation system calculates a route. 1 Y ou can select , , or to reach the next way point/destination from the current position. : The route with the quickest time will be used. : The standard route will be used.
28 English English Route Preferences The function allows settings to be made for the roads to be used and to start route calculation. 1 Each time a button is selected it will toggle between usage and non-usage of the corresponding roads or ferries. 2 Select .
English 29 Destination & Way Points The destination or way points used in route calculation can be changed using this function. ■ Addition of way points The following procedure can be used to add new way points to the current route for calculation.
30 English English ■ Modification of Destination or Way Point Positions This function allows the calculated route will be displayed and the positions of the destination or way points to be modified. 1 Select . 2 Select (Change Location). 3 Select the button for the location to be modified.
English 31 ■ Deletion of Destination or Way Points The destination or any way point which has been set may be deleted using this function. 1 Select . 2 Select the button corresponding to the destination or way point to be deleted. 3 Select when the confirmation message is displayed.
32 English English Display Route Use this function to display the entire calculated route. 1 Select . The Entire Route screen appears. :Y ou can set any areas you want to avoid from the list of street names. : Recalculates the route. If the data for the route cannot be shown on one screen, you can scroll using and .
English 33 ■ Setting the conditions for simulation run 1 Select . EDIT ROUTE PREVIEW screen apppears. : Stops at the destination or the next way point. : Stops at a point of interest which has been setup on the route. : Delete the POI which has been selected.
34 English English Navigation Set Up Y ou can alter the map display conditions, the route guidance conditions and show the system information. 1 Select . 2 Select (Navigation Set Up). The Navigation Set Up screen appears. Select a setting button while changing the screen using or .
English 35 User Setting Y ou can change the settings for the screen display and sound. 1 Select the desired item. Select a setting button while changing the screen using or .
36 English English Quick POI Selection This function allows you to set the categories on that are displayed when the (Point of Interest) menu is selected the map. Quick POI enables you to store up to six different kinds of category which you use most regularly .
English 37 2D/3D View Y ou can switch between a 2D and 3D display screen. Y ou can also change the viewing angle of the 3D display . 1 Select a 2D or 3D display for the Map Screen and the Guidance Screen. Map Screen: Changes the map screen display . Guidance Screen: Changes the route guidance screen, such as the enlarged junction diagrams.
38 English English Calibration This function allows you to correct any error in the position or direction of your vehicle display . ■ Adjusting Current Position and Direction 1 Select . 2 Move to the correct position and select . 3 Use or to adjust direction in which you are heading, and select .
English 39 ■ V ehicle Signal This function allows vehicle and GPS satellite data to be displayed. 1 Select . VEHICLE SIGNAL screen appears. ■ Map V ersion This function enables you to check the version of the map disc you are currently using. 1 Select .
Navigation Set Up 40 English English Set Clock The current time is set using this function. Since time notification is provided by a GPS satellite, time-zone adjustment can be carried out automatically . 1 Select if you would prefer 24-hour display; for 12-hour display .
English 41 Restore System Defaults This function replaces all the settings in the mobile navigation system with the initial default settings. 1 Select . : Restores the average speed setting to the initial value upon factory setting. If you execute Restore System Defaults, all of your Stored setting data will be deleted.
42 English English Stored Locations Y ou can store, edit, or delete any destinations, way points, or marked point. 1 Select . 2 Select (Stored Locations). 3 Select the item you want. (Memory Points): Places a marker on the map. (see page 43) (A void Area): Stores any areas to be avoided.
English 43 Memory Points ■ Memory Point Storage Memory points can be classified into one of four categories for storage. 1 Select the category for storage of the memory point. 2 Select . 3 Set a memory point using your preferred method. Up to 100 memory points can be stored.
44 English English ■ Memory Point Confirmation and Modification This function allows stored memory points to be displayed in list form and allows names, icons, telephone numbers, and the like to be modified. 1 Select the category of the memory point to be modified.
English 45 : Allows the name to be changed. When editing has been completed, select . Furthermore, select to display names on the map, or if these names are not to be displayed. : Allows memory points to be checked and modified on the map screen. After checking, select .
■ Memory Point Deletion Stored memory points can be deleted using this function. 1 Select the category of the memory point to be deleted. 2 Select . 3 Select the memory point to be deleted. 4 Select when the confirmation message is displayed. Select to cancel the deletion.
English 47 ■ Category Name Modification The category names — Personal, Business, Entertainment, and Market Point — can be changed if so required. 1 Select the category whose name is to be changed. 2 Select . 3 Erase letters using , enter the new letters, and then select .
■ A void Area Confirmation and Modification This function allows stored avoid areas to be displayed in list form and allows them to be modified. 1 Select . 2 Select the avoid area to be modified. 3 Select the button corresponding to the item to be modified.
English 49 Previous Destination (Deleting Stored Locations) Previously-set destinations can be deleted using this function. 1 Select . If is selected, all previous destinations will also be deleted. 2 Select the destination to be deleted. : Displays up to five previous suggestions.
50 English English Stored Locations Preset Destination ■ Preset Destination Storage Up to five regularly-used destinations can be stored so that, when required, they can be set for the actual destination in a one-touch operation. 1 Select . 2 Select a preset number .
English 51 ■ Preset Destination Confirmation and Modification This function allows preset destinations to be displayed in list form and allows them to be modified. 1 Select . 2 Select 1 through 5 in accordance with the destination to be modified. 3 Select the button corresponding to the item to be modified.
52 English English Other Functions Displaying POI’ s on a Map Y ou can select one of the six categories on the menu or List Categories and then select the POI(s) to be displayed on the map. 1 Select the screen. 2 Select (Points of Interest). 3 Select the categories to be displayed up to a maximum of five.
English 53 Showing POI Data Y ou can display POI (Point of Interest) data, such as name, address and telephone number . 1 Display the POI. (see pages 36 and 52) 2 Select the desired POI by moving on top of the POI icon. The name of the selected POI appears.
54 English English Remote Control The KNA-RC300 Remote Control is used in the same way as the touch panel. (The KNA-RC300 Remote Control is an optional extra.
English 55 The remote control features a pair of shortcut keys, and these can be assigned to any functions that you use on a regular basis. 1 Select . 2 Select (Navigation Set Up). 3 Select (Remote Control). Select to display the second page. 4 Select either or .
56 English English V oice Activate If the KNA-VC300 Microphone & T alk switch is connected, it will be possible to control the Navigation System through voice recognition.
English 57 V oice control can be carried out by simply clicking the talk switch and speaking a voice command (see the following section) into the microphone. 1 Click the talk switch. The system will emit a short confirmation beep. 2 Speak the desired voice command.
58 English English General Information ■ Accuracy of the V ehicle’ s Position Area in which GPS signals cannot be received Because the radiowave signals from the GPS satellites travel primarily by line of sight, the navigation system might not be able to receive the signals in the areas described below .
English 59 Confirm whether any problem is due to a minor operational error or a malfunction. Check the table below before contacting your local dealer for any repair service. The power does not come on. The fuse might be blown. The map does not scroll even when the vehicle is moving.
60 English English Specifications Specifications subject to change without notice. Navigation Section Antenna ........................................................................................................................ ..............Micro-strip patched antenna Receiver channel .
デバイスKenwood KNA-DV3100の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Kenwood KNA-DV3100をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKenwood KNA-DV3100の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Kenwood KNA-DV3100の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Kenwood KNA-DV3100で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Kenwood KNA-DV3100を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKenwood KNA-DV3100の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Kenwood KNA-DV3100に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKenwood KNA-DV3100デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
