KenwoodメーカーKRC-597の使用説明書/サービス説明書
ページ先へ移動 of 36
KRC-597 © B64-2715-00/00 (EW/E2W/EN/E2N) CASSETTE RECEIVER INSTR UCTION MANU AL KRC-597 Cover 10/7/03 1:37 PM Page 1.
— 2 — English Contents Safety precautions ......................3 About Cassette tape ...................4 General features .........................5 Power Selecting the Source V olume System Q Audio Control Speaker Setting Auxiliary Input Display Setting Switching Display Theft Deterrent Faceplate TEL Mute T uner features .
— 3 — To prevent injury and/or fire, take the following precautions: • Insert the unit all the way until it is fully locked in place. Otherwise it may fly out of place during collisions and other jolts. • When extending the ignition, battery , or ground wires, make sure to use automotive- grade wires or other wires with a 0.
— 4 — English • If you experience problems during installation, consult your Kenwood dealer . • If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer .
General features — 5 — Press the [SRC] button. Source required Display T uner "TUNER" T ape "T APE" External disc (Optional accessory) "DISC CH"/"CD" Auxili.
General features — 6 — English 1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Control mode Press the [AUD] button for at least 1 second. 3 Select the Audio item for adjustment Press the [FM] or [AM] button. Each time the button is pressed the items that can be adjusted switch as shown below .
— 7 — The presently selected AUX Name is blinks. 3 Select the Auxiliary input display Press the [ 4 ] or [ ¢ ] button. Each time the button is pressed it switches through the below displays.
General features — 8 — English The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate 1 Press the Release button. Drop open the faceplate. 2 Drawing the faceplate to left side pull it to the front and remove it.
— 9 — The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON.
T uner features — 10 — English FM AM AUD MENU 38 SCAN B.S/RDM REP B NR MTL/M.RDM DISP 7 NAME.S TI PTY/PROG 1 – 6 FM AM SRC 4 / ¢ MENU ST indicator Frequency display Preset station number Band display Putting the station in the memory . 1 Select the band Press the [FM] or [AM] button.
RDS features — 11 — Calling up the stations in the memory . 1 Select the band Press the [FM] or [AM] button. 2 Call up the station Press the desired [1] — [6] button. Preset T uning Putting a station with good reception in the memory automatically .
Selecting the Program T ype and searching for a station. 1 Enter PTY mode Press the [PTY] button. During PTY mode the "PTY" indicator is ON. This function can't be used during a traffic bulletin or AM reception. 2 Select the Program T ype Press the [FM] or [AM] button.
Putting the Program T ype in the Preset button memory and calling it up quickly . Presetting the Program T ype 1 Select the Program T ype to preset Refer to <PTY (Program T ype)> (page 12). 2 Preset the Program T ype Press the desired [1] — [6] button for at least 2 seconds.
Cassette player features Selecting the Program T ype display language. 1 Enter PTY mode Refer to <PTY (Program T ype)> (page 12). 2 Enter Changing Language mode Press the [DISP] button. 3 Select the language Press the [FM] or [AM] button. Each time the button is pressed the language switches as shown below .
— 15 — Press the [B NR] button. Each time the button is pressed the Dolby B NR turns ON or OFF . When it's ON, "B-NR" is displayed. Dolby B NR Fast Forwarding Press the [FM] button. When it's stopped press the [PROG] button. Rewinding Press the [AM] button.
Repeating the present song. Press the [REP] button. Each time the button is pressed the Music Repeat turns ON or OFF . When it's ON, "REP ON" is displayed. Music Repeat Each time the button is pressed the Blank Skip turns ON or OFF . When it's ON, "BS ON" is displayed.
External disc control features — 17 — FM AM AUD MENU 38 SCAN B.S/RDM REP B NR MTL/M.RDM DISP 7 NAME.S TI PTY/PROG DISP/ NAME.S SCAN M.RDM RDM REP 4 / ¢ DISC–/ AM DISC+/ FM SRC 38 Disc number Fast Forwarding Hold down on the [ ¢ ] button. Release your finger to play the disc at that point.
Play the songs on all the discs in the disc changer in random order . Press the [M.RDM] button. Each time the button is pressed the Magazine Random Play turns ON or OFF . When it's ON, "MRDM ON" is displayed. When the [ ¢ ] button is pressed, the next song select starts.
Scrolling the displayed CD text or MD title. Press the [DISP] button for at least 1 second. T ext/T itle Scroll — 19 — Attaching a title to a CD. 1 Play the disc you want to attach a name to •A title can't be attached to a MD. • Refer to the <Switching Display> (page 8) and select the "DNPS" display .
Because authorization by the Security Code is required when it's removed from the vehicle, personalizing this unit is by using the Security Code is a help in preventing theft. Security Code <In Standby mode> Setting during operation beep sound etc.
Setting the operation check sound (beep sound) ON/OFF . Display Setting "BEEP ON" Beep is heard. "BEEP OFF" Beep canceled. T ouch Sensor T one 2 Do the step 4 through 7 step operation, and reenter the security code. "APPROVED" is displayed.
Adjusting the display contrast. Contrast Adjustment Setting the Display type. Display Setting "DISP C" Demonstration. "DISP A" Normal display type. "DISP B" Silent display type. Switching Display T ype Selecting the button illumination color as green or red.
For the operation method refer to <Auto Memory Entry> (page 11). Auto Memory Entry <In T uner mode> Sets the tuning mode. T uning mode Display Operation Auto seek "AUTO 1" Automatic search for a station. Preset station seek "AUTO 2" Search in order of the stations in the Preset memory .
Setting the displayed text scroll. Display Setting "SCL MANU" Doesn't scroll. "SCL AUTO" Scrolls when the display changes. The text scrolled is shown below . • CD text • MD title • Radio text T ext Scroll Noise can be reduced when stereo broadcasts are received as monaural.
Setting the timer to turn this unit's power OFF automatically when Standby mode continues. Using this setting can save the vehicle's battery power . Display Setting "OFF – – –" Power OFF T imer function is OFF . "OFF 20M" T urns the power OFF after 20 (Original setting) minutes.
English — 26 — The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. 1. T o prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery.
— 27 — 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 TEL MUTE P.CONT ANT.CONT REMO.CONT Connecting Wires to T erminals Rear right output (Red) 4 10 Rear left output (White) Connector Function Guide Pin Numbers .
English — 28 — — 28 — Connecting Wires to T erminals Connecting the ISO Connector The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in 1 below .
— 29 — Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
English — 30 — Catch Lock Accessory 2 Removal tool — 30 — ■ Removing the hard rubber frame 2 When the upper level is removed, remove the lower two locations. The frame can be removed from the bottom side in the same manner . 1 Engage the catch pins on the removal tool and remove the two locks on the upper level.
— 31 — What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General ? The power does not turn ON. 01 ✔ The fuse has blown.
— 32 — English T roubleshooting Guide Disc source ? "AUX1" is displayed without achieving External disc control mode. 50 ✔ Unsupported disc changer is connected. 51 ☞ Use the disc changer mentioned in the IMPORT ANT INFORMA TION of the section on <Safety precautions> (page 3).
— 33 — MECHA ER: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason. E99 ➪ Check the disc magazine. And then press the reset button on the unit. If the "MECHA ER" code does not disappear , consult your nearest service center .
— 34 — English Specifications FM tuner section Frequency range (50 kHz space) ..............87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) ................................ 0.7 µV /75 Ω Quieting Sensitivity (S/N = 46dB) .................
KRC-597(E)_U.S 03.10.7 6:48 PM Page 35.
KRC-597 Cover 10/7/03 1:37 PM Page 8.
デバイスKenwood KRC-597の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Kenwood KRC-597をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKenwood KRC-597の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Kenwood KRC-597の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Kenwood KRC-597で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Kenwood KRC-597を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKenwood KRC-597の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Kenwood KRC-597に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKenwood KRC-597デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
