KenwoodメーカーKRC-865の使用説明書/サービス説明書
ページ先へ移動 of 30
KRC-865 ©B64-2155-00 (MW/IW) CASSETTE RECEIVER INSTR UCTION MANU AL KRC-865(M) Cover 01.10.26 5:45 PM Page 1.
— 2 — English Contents Safety precautions ......................3 About Cassette tape ...................4 General features .......................
— 3 — T o prevent injury or fire, take the following precautions: • Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when jolted. • When extending the ignition, battery , or ground wires, make sure to use automotive- grade wires or other wires with a 0.
Safety precautions — 4 — English • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button. The unit returns to factory settings when the Reset button is pressed.
Increasing V olume Press the [ u ] button. Decreasing V olume Press the [ d ] button. V olume Press the [SRC] button. Source required Display T uner "TUNER" T ape "T APE" External .
1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Control mode Press the [AUD] button for at least 1 second. 3 Select the Audio item for adjustment Press the [FM] or [AM] button. Each time the button is pressed the items that can be adjusted switch as shown below .
Switching the information displayed. Press the [DISP] button. Each time the button is pressed the display switches as shown below . In T uner source Information Display Frequency Station name "SN.
Selecting the display when this device is switched to Auxiliary input source. 1 Select Auxiliary input source Press the [SRC] button. Select the "AUX" display . 2 Enter Auxiliary input display setting mode Press the [NAME.S] button for at least 2 seconds.
• When the faceplate is kept remove open, according to the <OFF Wait T ime Setting> (page 19) setting, the faceplate is hidden and the power turns OFF . • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts.
T uner features Prevents tampering with the unit while your car is being serviced etc. Hiding the control panel Press the [SRC] button for at least 1 second. The faceplate slides open. When the time set in <OFF Wait T ime Setting> (page 19) lapses, the faceplate is hidden and the power turns OFF .
Putting the station in the memory . 1 Select the band Press the [FM] or [AM] button. 2 Select the frequency to put in the memory Press the [ 4 ] or [ ¢ ] button. 3 Put the frequency in the memory Press the [#1] — [#6] button for at least 2 seconds.
Cassette player features Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM band 9 kHz. While pressing the [#1] and [#5] button, press the Reset button. The frequency step changes to FM band 200 kHz, and AM band 10 kHz.
Indicating the songs to skip, and Fast Forwarding or Rewinding. Skipping to a later song Press the [ ¢ ] button. Each time the button is pressed the number of songs skipped increases. Skipping to a previous song Press the [ 4 ] button. Each time the button is pressed the number of songs skipped increases.
External disc control features Repeating the present song. Press the [REP] button. Each time the button is pressed the Music Repeat turns ON or OFF . When it's ON, "Repeat ON" is displayed. Music Repeat Fast forwarding automatically when an unrecorded portion continues for at least 10 seconds.
Doing Disc Search by entering the disc number . 1 Enter the disc number Press the number buttons on the remote. 2 Do Album Search Press the [DISC+] or [DISC–] button. Canceling Direct Album Search Press the [ 38 ] button. Input "0" to select disc 10.
Selecting the CD displayed in the DNPS of the CDs set in the Disc changer . 1 Enter DNPP mode Press the [DNPP] button on the remote. When "DNPP" is displayed the DNPS display in order . Forward / Reverse display Press the [DISC–] or [DISC+] button.
Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button for at least 1 second.
1 Select Clock Adjustment mode Press the [FM] or [AM] button. Select the "Clock Adjust" display . Manual Clock Adjustment Setting the operation check sound (beep sound) ON/OFF . Display Setting "Beep ON" Beep is heard. "Beep OFF" Beep canceled.
Setting the time until the faceplate hide operation starts after the power is turned OFF . The faceplate can be removed only during the set time period.
Setting the displayed text scroll. Display Setting "Scroll Auto" Repeats scroll. "Scroll MANU" Scrolls when the display changes. The text scrolled is shown below .
[VOL.] buttons Adjusting the volume. [SRC] button Each time the button is pressed the source switches. For the source switching order refer to <Selecting the Source> (page 5). [A TT] button T urning the volume down quickly . When it is pressed again it returns to the previous level.
[ 4 ]/ [ ¢ ] buttons Doing track forward and backward. [DISC+]/ [DISC–] buttons Doing album forward and backward. [ 38 ] button Each time the button is pressed the song pauses and plays. [DNPP]/ [OK] button Enters and cancels the <DNPP (Disc Name Preset Play)> (page 16) mode.
— 23 — Accessories Do not use any accessories other than those provided with your unit. If you use other accessories, you may damage the unit. 7. Reconnect the - battery . 8. Press the left part at the upper side of the faceplate once to make the faceplate control panel appear .
English — 24 — ANT. CONT ILLUMI EXT.CONT. P.CONT + + + + FRONT • L FRONT • R REAR • L REAR • R – + REAR FRONT R L FM/AM antenna input 15 10 Rear left output (White) 11 Rear right output .
— 25 — Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
English — 26 — 1 Insert the removal tool into the indentations in the hard rubber frame, and pull it gently until the lock is released. Accessory 8 Removal tool 3 Refer to the section "Removing the faceplate" (page 9) and then reattaching the faceplate.
— 27 — What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General ? The power does not turn ON. 01 ✔ The fuse has blown.
English — 28 — T roubleshooting Guide ✔ O-N switch is set to "O" side. ☞ Set the switch to "N" side. ✔ Unsupported disc changer is connected. 51 ☞ Connect the supported disc changer . (page 3) ? The specified disc does not play , but another one plays instead.
— 29 — The messages shown below display your systems condition. Eject: No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. E01 ➪ Load the disc magazine properly . No CD in the unit. ➪ Insert the CD. No Disc: No disc has been loaded in the disc magazine.
English — 30 — Specifications FM tuner section Frequency range (50 kHz) ..........................................87.5 MHz – 108.0 MHz (200 kHz) ........................................87.9 MHz – 107.9 MHz Usable sensitivity (S/N = 30dB) .....
デバイスKenwood KRC-865の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Kenwood KRC-865をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKenwood KRC-865の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Kenwood KRC-865の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Kenwood KRC-865で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Kenwood KRC-865を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKenwood KRC-865の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Kenwood KRC-865に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKenwood KRC-865デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
