KenwoodメーカーVR-6070の使用説明書/サービス説明書
ページ先へ移動 of 44
B60-5346-00 00 MA (K, P) 0209 AUDIO VIDEO SURROUND RECEIVER VR - 7060 INSTRUCTION MANUAL KENWOOD CORPORA TION About the supplied remote control Compared to standard remote controls, the remote control supplied with this receiver has several operation modes.
2 EN Units are designed for operation as follows. U.S.A. and Canada ........................................... AC 120 V only Australia ........................................................... AC 240 V only Europe and U.K ..........................
3 EN Contents Caution : Read the pages marked carefully to ensure safe operation. Before applying the power Before applying the power .............................. 2 Safety precauti ons ............................................. 2 How to use this manual .
4 EN Operation When the STANDBY indicator is lit, the power turns ON when you press the POWER RCVR key on the remote control. When the power comes ON, press the key you want to operate. • When pressing more than one remote control key successively, press the keys securely by leaving an interval of 1 second or more between keys.
5 EN Before applying the power Special features True home theater sound This receiver incorporates a wide variety of surround modes to bring you maximum enjoyment from your video software.
6 EN Names and functions of parts 1 POWER ON/STANDBY key * Use to turn the power ON/STANDBY. STANDBY indicator 2 A SPEAKERS B keys ) Use to turn the A/B speakers on or off. 3 LOUDNESS key ¡ Use to switch the status of LOUDNESS. 4 SPEAKER EQ key ¡ Use to select SPEAKER EQ’s setting.
7 EN 9 TV VOL +/– keys Use to adjust the TV’s volume. 0 1 / ¡ keys If CD, MD or Tape is selected as the input source, this key functions as search keys. Tune –/+ key Use to operate the tuner mode. ! 8 key Use to operate other components. Dimmer key ¤ Use to adjust the brightness of the display.
8 EN Make connections as shown in the following pages. When connecting the related system components, be sure to refer to the instruction manuals supplied with the components you are connecting. Do not connect the power cord to a wall outlet until all connections are completed.
9 EN Setting up the system Connecting the terminals 1 Strip coating. 2 Loosen. 3 Insert. 4 Secure. 1 Strip coating. 2 Push the lever. 3 Insert the cord. 4 Return the lever. Connection of banana plugs 1 Secure. 2 Insert. • Sound will not be heard if the speaker terminal is not fully secured.
10 EN IN IN REC OUT PLAY IN GND CD/DVD MD/TAPE R L PHONO Connecting audio components Record player Setting up the system To AC wall outlet Cassette deck or MD recorder CD or DVD player SYSTEM CONTROL jacks & IN OUT OUT OUT Moving coil (MC) cartridge record player cannot be used directly from the receiver unit.
11 EN VIDEO 1 VIDEO 2 VIDEO 3 PLAY IN PLAY IN PLAY IN REC OUT S VIDEO S VIDEO OUT VIDEO S VIDEO IN VIDEO S VIDEO IN VIDEO S VIDEO IN VIDEO DVD IN MONITOR OUT OUT VIDEO IN VIDEO IN VIDEO DVD IN IN VIDE.
12 EN COAXIAL OPTICAL OPTICAL VIDEO 3 CD/DVD DIGITAL IN DVD/ 6CH VIDEO 2 Digital connections The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD) format digital signals.
13 EN DVD IN VIDEO 3 IN MONITOR OUT CR CB Y CR CB Y CR IN CB IN Y IN CR OUT CB OUT Y OUT CR OUT CB OUT Y OUT COMPONENT VIDEO Setting up the system Connecting video components (COMPONENT VIDEO) If you have connected the receiver to a video component with COMPONENT jacks, you can get a better picture quality than by connecting to the S-VIDEO jacks.
14 EN DVD/6CH INPUT FRONT SURROUND SUB WOOFER CENTER PLAY IN PLAY IN VIDEO 2 VIDEO 3 COAXIAL OPTICAL OPTICAL VIDEO 3 CD/DVD DVD/ 6CH VIDEO 2 DIGITAL IN OUT VIDEO IN VIDEO IN VIDEO DVD IN IN VIDEO MONI.
15 EN GREEN WHITE RED RL CENTER FRONT A - + ++ - - FRONT B RL GRAY SURROUND RL - + BLUE PURPLE SU R R OUND BACK/ SUBWOO F ER SURROUND BACK SUBWOOFER PRE OUT Right Front Speakers A Right Center Speaker.
16 EN Connecting the antennas AM loop antenna The supplied loop antenna is for use indoors. Place it as far as possible from the receiver, TV set, speaker cords and power cord, and adjust the direction for best reception. AM antenna terminal connections 1 Push lever.
17 EN Connecting the system control Connecting system control cords after connecting a KENWOOD audio component system lets you take advantage of convenient system control operations. This unit is compatible only with the [SL-16] mode. The system control operation is not available if the unit is connected in the [XS8], [XS], or [XR] connection mode.
18 EN Preparing for surround sound Speaker settings To enable you to obtain optimum enjoyment from the receiver ’ s listening modes, make sure to complete the speaker settings (subwoofer, front, center, and surround speakers) as described below.
19 EN $ Use the MULTI CONTROL knob or Multi ( % / fi ) keys to select the appropriate subwoofer re-mix setting. 1 SW RE-MIX ON : Subwoofer re-mix setting mode to the receiver is ON. 2 SW RE-MIX OFF : Subwoofer re-mix setting mode to the receiver is OFF.
20 EN 3 Use the ∧ / ∨ keys or @ / # keys to select the speakers and the MULTI CONTROL knob or Multi ( % / fi ) keys to adjust the distance to the front speakers. The speaker indicator to be adjusted blinks. L SL S SB SR C R SP MUTE OPTICAL 6CH INPUT COAXIAL ANALOG 96kHzfs CINEMA EQ.
21 EN Listening to a source component VOLUME CONTROL VOL / Input Selector Input Selector AV AUX 1 Use the Input Selector and AV AUX keys to select the source you want to listen to.
22 EN Adjusting the LOUDNESS mode You can adjust the Loudness function which controls the low volume settings to maintain the music's richness. The adjustment can be made when the receiver is in the PCM stereo and analog stereo mode. Press the LOUDNESS key to turn the LOUDNESS setting ON.
23 EN Recording audio (analog sources) Recording a music source 1 Use the Input Selector keys to select the source (other than “ MD/ TAPE ” ) you want to record.
24 EN Presetting radio stations manually 1 Tune to the station you want to store. 2 Press the MEMORY key while receiving the station. Blinks for 5 seconds Lights for 5 seconds Proceed to step 3 within 5 seconds. (If more than 5 seconds elapse, press the MEMORY key again).
25 EN Listening to radio broadcasts Receiving preset stations TUNER Numeric keys 1 Press the TUNER key to select tuner as the source. 2 Enter the number of the preset station you want to receive (up to “40”).
26 EN Ambience effects This receiver is equipped with listening modes that allow you to enjoy an enhanced sonic ambience with a variety of video sources. In order to obtain the optimum effect from the surround modes, make sure to input the proper speaker settings beforehand.
27 EN Ambience effects Dolby Digital The Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from Dolby Digital program sources (such as Laserdisc or DVD software marked ).
28 EN DSP mode The DSP mode lets you add the atmosphere of a live concert or hall to almost any type of program source. These modes are particularly effective when used with stereo program sources, like CD, television, and FM radio.
29 EN Surround play The DTS compatible models can reproduce a CD, DVD, or LD carrying the DTS mark. DOLBY DIGITAL can be used when playing DVD or LD software bearing the mark and DOLBY DIGITAL format digital broadcasts (etc.). DOLBY PRO LOGIC can be used when playing video, DVD, or LD software bearing the mark.
30 EN Ambience effects DVD 6-channel playback Using a DVD player or the like equipped with six (5.1) output channels and the receiver, you can enjoy surround sound playback. Connecting a DVD player which can decode the surround signal itself is also acceptable.
31 EN Ambience effects Midnight mode (Dolby Digital mode only) When watching movies at night , you might not be able to raise the volume as loud as normal.
32 EN Ambience effects CS II Gain adjustment mode (CS II mode only) CS II GAIN allows user to adjust the input gain for the Circle Surround II processing. 1 Press the SOUND key, then press the ∧ / ∨ keys or @ / # keys until “ CS II GAIN ” appears on the display.
33 EN The remote control supplied with this receiver is also capable of controlling components from a variety of manufacturers once you register the appropriate setup codes into the remote control unit. Registering setup codes for other components 1 Find the setup code of the component to be registered.
34 EN Basic remote control operations for other components Checking the codes If you have setup the remote control using the procedures described in “ Searching for your codes ” , you may need to find out which four-digit code is operating your equipment: For example, to find out which code is operating your TV: 1 Press the TV key once.
35 EN Maker Setup Codes Admiral 0048, 0209 American High 0035 Bell & Howell 0104 Broksonic 0121, 0184, 0209 Canon 0035 Carver 0081 Craig 0047 Curtis Mathes 0035, 0060, 0162, 0760 Daewoo 0045 Denon.
36 EN Maker Setup Codes GE 0021, 0047, 0051, 0178, 0251, 0451, 0747, 0804, 0807, 0809, 0811, 1147, 1347 Gibralter 0017, 0019, 0030 GoldStar 0019, 0030, 0178, 0802, 0814 Gradiente 0053, 0056, 0800 Grun.
37 EN Maker Setup Codes Techwood 0051, 0056 Teknika 0016, 0019, 0054, 0056, 0060, 0092, 0150, 0179, 0180, 0800, 0802 Telefunken 0056 Thomas 0800 Toshiba 0060, 0154, 0156, 0901, 0906, 1256 Totevision 0.
38 EN Maker Setup Codes Aiwa 0641 Apex Digital 0672, 0717, 0755, 0794, 0795, 0796, 0797, 0830 Blue Parade 0571 DVD2000 0521 Daewoo 0784 Denon 0490, 0634 Emerson 0591 Enterprise 0591 Fisher 0670 GE 052.
39 EN Basic remote control operations for other components CASSETTE deck, CD player & MD recorder operations You can perform these basic operations using the keys described below when connected to KENWOOD cassette deck, CD player or MD recorder equipped with system control operations.
40 EN Basic remote control operations for other components Other components ’ operations Refer to the following for the type of remote control operations available for each component. • When pressing keys in succession, press each key firmly and be sure to wait at least 1 second before pressing the next key.
41 EN Basic remote control operations for other components DSS operation keys Cable operation keys DVD player operation keys S R C P o w e r T V P o w e r 5 6 8 9 4 3 2 1 0 7 Tune – Tune + Dimmer Ba.
42 EN In case of difficulty Tuner Cause • No antenna is connected. • The broadcast band is not set properly. • The frequency of the desired station is not tuned. • Noise due to ignition noise from an automobile. • Noise due to interference from an electric appliance.
43 EN Remote control unit Cause • No setup codes registered for the respective input(s). • The remote control is set to a different operation mode. • Batteries are exhausted. • The remote control unit is too far away from the main system, controlling angle is too large, or there is an obstacle between the receiver and the remote.
44 EN For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.
デバイスKenwood VR-6070の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Kenwood VR-6070をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはKenwood VR-6070の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Kenwood VR-6070の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Kenwood VR-6070で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Kenwood VR-6070を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はKenwood VR-6070の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Kenwood VR-6070に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちKenwood VR-6070デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。