AntecメーカーThree Hundred Twoの使用説明書/サービス説明書
ページ先へ移動 of 23
1 Three Hundred Two User Manual.
2 Three Hundred Two User Manual Congratulations on your purchase of the Three Hundre d Two! The team that br ought you the Thr ee Hundred is back with an enclosur e designed to handle tomorrow’ s high-performance s ystems. Introducin g the Thre e Hundred Two, the ne xt standard in affordab le gaming cases.
3 Table of Contents Section 1: Intro duction 1.1 Getting to Know Your Chas sis ............................................................................ 5 1.2 Chassis Specifications ..................................................................
4 Section 1 Introduction Three Hundred Two User Manual.
5 1.1 Getting to Know Your Chassis 1. 3 x 5.25” drive bays 2. 2 x 2.5” drive ba ys 3. 6 x 3.5” drive ba ys 4. 1 x 120 mm r ear TwoCool fan (standard) 5. 1 x 140 mm top T woCool fan (standard ) 6. 2 x 120 mm fr ont intake fans (optional) 7. 1 x 120 mm side intake fan (optional) 8.
6 1.2 Chassis Specification s Chassis Type Mid Tower Chassis Color Black Dimensions 513 mm (H) x 2 29 mm (W) x 471 mm (D) 20.2” (H) x 9” (W) x 18.5” (D) Weight 15.
7 Section 2 Hardware Installation Three Hundred Two User Manual.
8 2.1 Setting Up When working in your case, please ke ep the following in mind: Put the case uprig ht on a flat, stable surface s o that the rear pan el (power sup ply and expansion slots) is facing you. Handle all comp onents and cards wi th care.
9 2. 3 Motherboard Installa tion Before proceeding, check the manual f or your CPU c ooler to find out if there ar e steps you must do before installing the mothe rboard.
10 2. 4 Installing KUHLER H 2 O Liquid Coolers The following instru cts how to install the Antec KUHLER H 2 O liquid CPU cooler (620 / 920). F or any other CPU coolers, pleas e consult your manufacturer’s installation guid e. Caution : Check your motherb oard’s CPU soc ket to ensure its compatibility with the KUHLER H 2 O.
11 Press down on the drive cover t abs. 2. 6 External 5.25” Device Installation The Three Hundred T wo can support up t o three 5.25 ” devices. 1. Remove the side pan els and front bez el as directed in Section 2.
12 2. 7 Internal 2.5” D evic e Installation There are two 2. 5” drive mounting loca tions in the Th ree Hundred Two: on the b ack of the motherboard tray and at the bot tom of the case. To install on the back of the motherboard tray: 1. Remove the side panels as d escribed in Section 2.
13 2. 8 Internal 3 .5” Devic e Installation The Three Hundred T wo includes 6 pair s of 3.5” drive rails. You will n eed 1 pair p er 3.5” drive. 1. Line up the drive rail pins to the sides of your 3.5” drive. Ensure that the squ eeze-tabs are alig ned on the side of your driv e that does not ha ve power or data connectors.
14 2.10 Expansion Slot Dev ice Installation When installing grap hics card s or other expansi on cards, you must first remove the rear place coverin g the expansi on slots. 1. With the rear of the case facing you, remove the 2 screws shown to remove the plate.
15 Section 3 Front I/O Ports.
16 Pin Signal Names (HDA) Pin Signal Names (AC’97) 1 MIC2 L 1 MIC In 2 AGND 2 GND 3 MIC2 R 3 MIC P ow er 4 AVCC 4 N C 5 FRO -R 5 Line Out (R) 6 MIC2 _J D 6 Line Out (R) 7 F_IO_SEN 7 N C 8 Key (n o pi n) 8 Key (n o pi n) 9 FRO-L 9 Line Out (L) 10 LINE2_JD 10 Line Out (L) Three Hundred Two User Manual 3.
17 3. 3 Power Switch / Reset Switch / Hard Disk Drive LED C onnectors Connected to your fr ont panel are LE D leads for power and HDD acti vity, as well a s switch leads f or the power and reset butt ons. Attach th ese to the corr esponding connect ors on your motherbo ard.
18 3. 4 Rewiring Motherboar d Head er Connections There may co me a time wh en you need to rec onfigure the pin-out of a motherboard header c onnector. Examples could be f or your USB header, audio input h eader, or some other front p anel connector such as the Power Butt on connector.
19 Section 4 Cooling System Three Hundred Two User Manual.
20 4.1 Includ ed Fans The Three Hundred T wo comes with two standard fans (yellow outlin e) – a rear 120 mm TwoCool fan and a top 140 mm T woCool fan. The red rectangle s indicate additional fan mounts. Mounting procedure s for these fans i s discussed in Section 4.
21 4.2 Optional Fans The Three Hundred T wo includes m ounts for up to fou r more fans. Thes e mounts are as foll ows: - 2 x front intake 1 20 mm mounts - 1 x side 120 mm mounts - 1 x 120 mm mount behind motherboard Front intake 120 mm fans 1. Remove the front bez el as outlined in Se ction 2.
22 4.3 Air Filters There are two filter s in the Three Hun dred Two that ca n be removed and cleaned: the front filter and the PSU intake filt er. To remove the fr ont air filter: 1. Remove the front bez el as described in Section 2.2. 2. Orient the bezel by holding it wi th the inside facing you, with the driv e bay cov ers to the right.
23 Antec, Inc. 47900 Fremont Bl vd. Fremont, CA9453 8 tel: 510- 770 -1200 fax: 510-770-1288 Antec Europe B .V. Stuttgartstraat 12 3047 AS Rotterda m The Netherlands tel: +49- 40 -226139- 22 fax: +31 (0) 10 43 7-1752 Technical Suppo rt US &Canada 1-800-22ANTEC customersupport@ant ec.
デバイスAntec Three Hundred Twoの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Antec Three Hundred Twoをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAntec Three Hundred Twoの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Antec Three Hundred Twoの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Antec Three Hundred Twoで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Antec Three Hundred Twoを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAntec Three Hundred Twoの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Antec Three Hundred Twoに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAntec Three Hundred Twoデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
