ANUBISメーカーWireless Access Pointの使用説明書/サービス説明書
ページ先へ移動 of 20
Instruction Manual TYPHOON SPEEDNET WIRELESS ACCESS POINT Art: 70062C 08/2002 HTTP://WWW.TYPHOONLINE.COM.
Typhoon Speednet Wireless Access Point 1 DECLARATION OF CONFORMITY We, the manufacturer / importer Anubi s Electronic GmbH Am Langfeld 38 66130 Saarbrücken Germany Declare that the product Type of pr.
Typhoon Speednet Wireless Access Point 2 Copyright Copyright 2001 by ANUBIS International Comp. Ltd. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, s.
Typhoon Speednet Wireless Access Point 3 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Typhoon Speednet Wireless Access Point 4 R&TTE Compliance Statement This equipment complies with all the requirements of DIRECTIVE 1999/5/CE OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, .
Typhoon Speednet Wireless Access Point 5 Manual Contents Chapter 1 Introduction …………………………………………… . ………… . ……………… . … . … . 6 Chapter 2 Installation Procedure …………………………………………………… .
Typhoon Speednet Wireless Access Point 6 Chapter 1 Introduction This chapter is your starting point for the rest of this manual. Package Contents Before you begin the installation, please check the items of your package.
Typhoon Speednet Wireless Access Point 7 Chapter 2 Installation Procedure This chapter will walk you through the hardware and Device Manager Installing the Hardware Perform the following steps t o install the W ireless Access Point (AP).
Typhoon Speednet Wireless Access Point 8 Installing the AP Manager The Access Point (AP) can be manually configured using the "AP Manager". Follow the below instructions to install this software. 1. Connect the A P to a computer using the included USB cable.
Typhoon Speednet Wireless Access Point 9 Chapter 3 D evice & Network Management This chapter will help you understand the device management, network management and device management applications. To manage the various devices on the network and the network itself, three software applications are provided.
Typhoon Speednet Wireless Access Point 10 Device Manager Start the Device Manager by right - clicking the icon on the system tray and selecting ” Device Configuration ” . The Device Manager uses the concept of “ profiles . “ Profiles allow a user to store specific settings for a particul ar situation or environment.
Typhoon Speednet Wireless Access Point 11 The list below defines all user - configurable settings within a profile..
Typhoon Speednet Wireless Access Point 12 Network Management Double - click on the system tray icon to start Network Management (or right - cli ck and select "Open Network Management"). Note : T he Network Management Application is ONLY available when the Network is in Multimedia mode.
Typhoon Speednet Wireless Access Point 13 AP Device Manager When the USB cable is connected, the AP will enter configuration mode. Double - clicking the icon on the desktop will start the AP Device Manager. Note: While the AP is in "configuration mode" (when the USB cable is inserted), the AP will not function in the netwo rk.
Typhoon Speednet Wireless Access Point 14 l Setting up IP/SNMP settings - When operating in Wi - Fi mode, the AP runs an IP stack. The IP settings can be modified by se lecting the "IP/SNMP" settings in the Profiles menu of the AP manager.
Typhoon Speednet Wireless Access Point 15 Switches and Connectors Nodes with a Cirrus wireless adapter installed can be switched from Wi - Fi to Multimedia mode (and vice versa) using the device manager software.
Typhoon Speednet Wireless Access Point 16 Chapter 4 Uninstall Hardwar e & Software T his chapter will help with the Hardware & Software uninstall process.
Typhoon Speednet Wireless Access Point 17 Chapter 5 Technical Specification l Standard : Wi - Fi ( IEEE 802. 11b) and MM/QoS (IEEE 802.11e - type) l Signal Type : DSSS (Direct Sequence Spread Spectrum) l F requency Band: 2.400 GHz ~2.4835GHz l Modulation : QPSK / BPSK / CCK l Ports Two RJ 45, One USB l Ethernet Interface : IEEE 802.
Typhoon Speednet Wireless Access Point 18 Chapter 6 Tr oubleshooting This section provides solutions to problems usually encountered during the installation and operation of this Wireless USB Adaptor. Read the description below to solve your problems.
Typhoon Speednet Wireless Access Point 19 ü What is DSSS ? What is FHSS ? And what are their differences ? Frequency - hopping spread - spectrum (FHSS) uses a narrowband carrier that changes frequency in a pattern that is known to both transmitter and receiver.
デバイスANUBIS Wireless Access Pointの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
ANUBIS Wireless Access Pointをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはANUBIS Wireless Access Pointの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。ANUBIS Wireless Access Pointの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。ANUBIS Wireless Access Pointで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
ANUBIS Wireless Access Pointを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はANUBIS Wireless Access Pointの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、ANUBIS Wireless Access Pointに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちANUBIS Wireless Access Pointデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。