AOCメーカーE2460SWDの使用説明書/サービス説明書
ページ先へ移動 of 58
.
2 Safety ........................................................................................................................................................................ 3 National Conventions ..................................................
3 Safe ty National Con ventions The following subsections describe notational conventions used in this document. Notes, Cautions, and W arnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type.
4 Power The monitor should be operated only from the ty pe of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local pow er company . The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin.
5 Installation Do not place the mo nitor on an unstable cart, stand, tripod, br acket, or ta ble. If t he monitor falls, it can i njure a person and cause serious damage to thi s product. Use only a cart, stand, tripod, bra cket, or table recommended by the manufacture r or sold with this product.
6 Cleaning Clean the cabinet regularly with cloth. Y ou can use soft-detergent to wipe out the stain, inste ad of strong-detergent which will cauterize the product cabinet. W hen c leaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface.
7 Other If the product is emitting a strange smell, sound or smoke, disconnect the pow er plug IMMEDIA TEL Y and contact a Service Center . Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation.
8 Setup Contents in Box Monitor CD Manual Monitor Base Power Cable Analog Cable DVI Cable Not all signal cables (Analog, DVI cables) will be provided for all countries and regions. Please check with the local dealer or AOC branch of fice for confirmation.
9 Setup Stand & Base Please setup or remove the base following the steps as below . Setup: Remove:.
10 Adjusting Vie w ing Angle For optimal viewing it is recommended to look at the f ull face of the monitor , then adjust the monitor's angle to your own preference. Hold the stand so you will not topple the monitor w hen you change the monitor's angle.
11 Connecting the Monitor Cable Connections In Back of Monitor and Computer: 1. Power 2. DVI cable 3. D-Sub cable T o p rotect equipment, always turn off the PC an d LCD monitor before connecting. 1 Connect the power cable to the AC p ort on the back of the monitor .
12 W all Mounti ng Pr eparing to Install An Optional Wall M ounting Arm. This monitor can be attached to a wall mounting arm you purchase separately . Disconnect power before this procedure. Follow these steps: 1 Remove the base. 2 Follow the manufacturer's instructions to assemble the wall mounting arm.
13 Adjusting Setting Optimal Resol ution Windows V ista For Windows Vista: 1 Click ST ART . 2 Click CONTROL P ANEL. 3 Click Appearance and Personalization.
14 5 Click Display Settings. 6 Set the resolution SLIDE-BAR to 1920 by 1080 ..
15 Windows XP For Windows XP: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Click Appearance and Themes. 5 Double click DISPLA Y ..
16 6 Click SETTINGS. 7 Set the resolution SLIDE-BAR to 1920 by 1080 . Windows ME/2000 For Windows ME/2000: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Double click DISPLA Y . 5 Click SETTINGS. 6 Set the resolution SLIDE-BAR to 1920 by 1080.
17 Hotkeys 1 Source/Auto/Exit 2 Eco (DCR) 3 4:3 or Wide 4 Menu/Enter 5 Power Power Press the Power button to turn o n/ off the monitor . Menu/Enter Press to display the OSD or confirm the selection. Eco (DCR) Press the Eco key continuously to select the Eco mode of brightness and DCR on w hen there is no OSD.
18 OSD Setting Basic and simple instruction on the control key s. 1) Press the M ENU-button to activate the OSD window . 2) Press < or > to navigate through the functions. Once the de sired function is highlighted, press the MENU-button to activate it .
19 Luminance 1. Press (Menu) to d isplay menu. 2. Press < or > to select (Luminance ), and press to enter . 3. Press < or > to select submenu, and press to enter.
20 4. Press < or > to adjust. 5. Press to exit . Brightness 0-100 Backlight Adjustment Contrast 0-100 Contrast from Digital-register. Eco mode Standard Standard Mode Text Text Mode Internet Inte.
21 Image Setup 1. Press (Menu) to d isplay menu. 2. Press < or > to select ( Image Setup), and press to enter . 3. Press < or > to select submenu, and press to enter.
22 4. Press < or > to adjust. 5. Press to exit . Clock 0-100 Adjust picture Clock to reduce Vertical-Line noise. Phase 0-100 Adjust Picture Phase to reduce Horizontal-Line noise Sharpness 0- 100 Adjust picture sharpness H.Position 0-100 Adjust the horizontal position of the picture.
23 Color Setup 1. Press (Menu) to d isplay menu. 2. Press < or > to select ( Color Setup), and press to enter . 3. Press < or > to select submenu, and press to enter.
24 4. Press < or > to adjust. 5. Press to exit . Color T emp. W arm Recall Warm Color Temperature from EEPROM . Normal Recall Normal Color Temperature from EEPROM. Cool Recall Cool Color Temperature from EEPROM . sRGB Recall SRGB Color Temperature from EEPROM.
25 Picture Boost 1. Press (Menu) to d isplay menu. 2. Press < or > to select ( Picture Boost), and press to enter . 3. Press < or > to select submenu, and press to enter.
26 4. Press < or > to adjust. 5. Press to exit . Frame Size 14 -100 Adjust Frame Size Brightness 0-100 Adjust Frame Brightness Contrast 0-100 Adjust Frame Contrast H.
27 OSD Setup 1. Press (Menu) to d isplay menu. 2. Press < or > to select ( OSD Setup), and press to enter . 3. Press < or > to select submenu, and press to enter.
28 4. Press < or > to adjust. 5. Press to exit . H.Position 0-100 Adjust the horizontal position of OSD V.Position 0-100 Adjust the vertical position of OSD Timeout 5- 120 Adjust the OSD Timeout.
29 Extra 1. Press (Menu) to d isplay menu. 2. Press < or > to select ( Extra), and press to enter . 3. Press < or > to select submenu, and press to enter.
30 4. Press < or > to adjust. 5. Press to exit . Input Select Analog Select Analog Sigal Source as Input Auto Config yes or no Auto adjust the picture to default Off timer 0-24hrs Select DC off .
31 Exit 1. Press (Menu) to d isplay menu. 2. Press < or > to select (Exit), and press to enter . 3. Press to exit . Exit Exit the main OSD.
32 LED Indicator Status LED Color Full Power Mode Green or Blue Active-off Mode Orange or red.
33 Driver Monitor Dri ver Windows 7 1. Start Windows® 7 2. Click on the 'Start' button and then click on 'Control Panel'. 3. Click on the 'Display' icon.
34 4.Ckick on the “ Change display settings ” button. Click the “ Advanced Settings” button. Click the “Monitor” tab and then click the “Properties” button.
35 7. Click the “Driver” tab. 8. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on “Update Driver ... “ and then click the "Browse my computer for driver software" button. 9. Select "Let me pick from a list of device drivers on my computer" .
36 10. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X: Drivermo dule name (w here X is the drive letter designator for the CD-ROM drive). 11. Select the "xxx.inf" file and click the “Open” button.
37 Windows V ista 1. Click "Start " and "Control Panel". T hen, double -click on "Appearance and Personalization". 2. Click "Personalization" and then "Display Settings". 3. Click "Advanced Settings.
38 4. Click "Properties" in th e "M onitor" tab. If the "Properties" button i s deactivated, it means the co nfiguration for your monitor is completed. T he monitor can be used as is. If the message "Windows needs...
39 Windows XP 1. Start Windows® X P 2. Click on the 'Start' button and then click on 'Control Panel'. 3. Select and click on the category „Appearance and T hemes‟ 4.
40 5. Select the 'Settings' tab then click on the 'Advanced' button. 6. Select 'Monitor' tab - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active, click on 'Properties' butto n.
41 8. Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button. 9. Select the 'Don't Search. I will choose the driver to install' radio button. T hen click on the 'Nex t' button .
42 Windows 2000 1. Start Windows® 2000 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced.
43 i-Menu Welcome to “i - Menu” softw are by AOC. i -Menu makes it easy to adjust your monitor display setting by usi ng on screen menus instead of the OSD button on the monitor .
44 e-Saver W elcome to u se AOC e-Saver monitor power management software! The AOC e -Saver features Smart Shutdown functions for your monitors, allow s your monitor to timely shutdow n when PC unit is at any status (On, O ff, Sleep or Screen Saver); the actual shutdown time depends on your preferences (see ex ample below).
45 Screen+ Welcome to "Screen+" softw are by AOC, Screen+ softw are is a desktop screen splitting tool, it splits the desktop into different panes, each pan e displays a different w indow . Y ou onl y need to drag the window to a corresponding pane, when you want to access it.
46 T roubleshoot Problem & Question Possible Solutions Power LED Is Not ON Make sure the power button is ON and the P ower Cord is properly connected to a grounded power outlet and to the monitor . No images on the screen Is the power cord connected properly? Check the power cord connection and power supply .
47 Specification General Specifi cation Panel Model name E2 460S WD Driving system TFT Color LCD Viewable Image Size 59.8 c m diagonal Pixel pitch 0. 2715 mm(H) x 0.
48 Preset Displa y Modes ST AND RESOLUTION HORIZONT AL FREQUENCY(kHZ) VERTICAL FREQUENCY(Hz) VGA 640× 480 @60Hz 31.469 59.94 640× 480 @72Hz 37.861 72.809 640× 480 @75Hz 37.5 75 SVGA 800× 600 @56Hz 35.156 56.25 800× 600 @60Hz 37.879 60.317 800× 600 @72Hz 48.
49 Pin A ssignments Pin Number 15 -Pin Side of the Signal Cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 Ground 5 Detect Cable 6 GND-R 7 GND-G 8 GND-B 9 +5V 10 Ground 11 Ground 12 DDC -Serial data 13 H-sync 14 V -s ync 15 DDC -Serial clock Pin No. Signal Name Pin No.
50 Plug and Pla y Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B c apabilities according to the VESA DDC ST ANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, c ommunicate additional information about its display capabilities.
51 Regulation FCC Notice FCC Class B Radio Frequency Interference State ment W ARNING: (FOR FCC CERTIFIED M ODELS) NOTE: This equipment has been tested an d found to comp ly w ith the limits for a Clas s B digital device, p ursuant to Part 15 of the FCC Rules.
52 WEEE Declaration Disposal of Was te Equipment by Users in Private Household in the European Union. This symbol on the product or on its packaging indicates that this product must not be disposed of w ith your other household waste.
53 EPE A T Declarat ion EPEA T is a system to help purchasers in the public and private sectors evaluate, compare and select desktop computers, notebooks and monitors based on their environmental attributes.
54 Service EU W ARRANTY FOR A OC MONITORS LIMITED THREE-YEAR W ARRANTY* For AOC LCD M onitors sold within Europe, AOC International (Europe) B.V . warrants this product to be free from defects in material and workmanship for a period of Three (3) years after the original date of consumer purchase.
55 ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANT IES OF MERCHANT ABIL ITY AND FI TNESS FOR A P ARTICULAR PURPOSE) ARE LIMITED IN DURA TION T O A PERIOD OF T HREE (3) YEARS FOR P ARTS AND LABOR F ROM T HE ORIGINAL DA TE OF CONSUMER PURCHASE.
56 W arranty Statement for North & South A m erica (excluding Brazil) WARR ANTY ST A TEMENT for AOC Color M onitors Including those Sold within North America as Specified Envision Peripherals, Inc.
57 ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANT IES OF MERCHANT ABIL ITY AND FI TNESS FOR A P ARTICULAR PURPOSE) ARE LIMITED IN DURA TION T O A PERIOD OF T HREE (3) YEARS FOR P ARTS AND LABOR AND ONE (1) YEAR FOR CR T TUBE OR LCD P ANEL FROM T HE ORIGINAL DA TE OF CONSUMER PURCHASE.
58 Only for AOC bra nded monitors sold within the continental Un ited States. All AOC branded m onitors are now covered by the EASE Prog ram. If y our monitor malfuncti ons at any time during th e first three m onths, AOC wil l provide a replacem ent monitor w ithin 72 hour s after you are approv ed for our prog ram.
デバイスAOC E2460SWDの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
AOC E2460SWDをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAOC E2460SWDの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。AOC E2460SWDの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。AOC E2460SWDで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
AOC E2460SWDを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAOC E2460SWDの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、AOC E2460SWDに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAOC E2460SWDデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。