AOCメーカーe2795Vhの使用説明書/サービス説明書
ページ先へ移動 of 64
L C D Monitor User Manual.
2 Safety......................................................................................................................... ............................................... 4 National C onventio ns ................................................
3 EPEA T Declar ation .............................................................................................................. ............................ 5 9 Service .............................................................................
4 Safety National Conventions The following subsections describe n otational conventions used in this document. Notes, Cautions, and W arnings Throughout this guide, blocks of text ma y be accomp anied by an icon and printe d in bold type or in italic type.
5 Power The monitor should be operat ed only from the type of power source indicated on the lab el. If you are not sure of the type of power supplied to your hom e, consult your dealer or local power company . The monitor is equipped with a three-pronged grounded plug, a plu g with a third (grounding) pin.
6 Inst allation Do not place the monitor on a n unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product.
7 Cleaning Clean the cabinet regularly with the cloth provided. Y ou can use soft-detergent to wipe out the st ain, instead of strong-detergent which will c auterize the product cabinet. When cleaning, make sure no detergent is leaked into the product.
8 Other If the product is emitting a strange smell, sound or smoke, disconnect the po wer plug IMMEDIA TEL Y and contact a Service Center . Make sure that the ventilating ope nings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vib ration or high impact conditions during operation.
9 Setup Content s in Box Not all signal cables (Ana log, USB, DVI, and HDMI cables ) will be pr ovided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.
10 Setup S t and & Base Please setup or remove the base follo wing the step s as below . Setup: Remove:.
11 Adjusting V iewing Angle For optimal viewing it is recommended to look at the full fa ce of the monitor , then adjust the monitor's angle to your own preference. Hold the stand so you will not toppl e the moni tor when you change the monitor's angl e.
12 Connecting the Monitor Cable Connections On Back of Monitor and Computer: 1. Power 3 . Analog (DB-15 VGA cable) 4 .DVI 1 Connect the power cable to the AC port on the back of the monitor . 3 Connect one end of the 15-pin D-Sub cable to the back of the monitor and conn ect the other end to the computer's D-Sub port.
13 W all Mounting Preparing to Install An Optional W all Mounting Arm. This monitor can be attached to a wall mounting arm you purchase separately . Disconnect po wer before this procedure. Follow these steps: 1 Remove the base and stand. 2 Follow the manufacturer's instructi ons to assemble the wall mounting arm.
14 Adjusting Setting Optimal Resolution Windows Vist a For Windows Vist a: 1 Click ST ART . 2 Click CONTROL P ANEL. 3 Click Appearance and Personalization.
15 5 Click Display Settings. 6 Set the resolution SLIDE-BAR to 1 920 by 1080 ..
16 Windows XP For Windows XP: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Click Appearan ce and Themes. 5 Double click DISPLA Y ..
17 6 Click SETTINGS. 7 Set the resolution SLIDE-BAR to 1 920 by 1080 . Windows ME/2000 For Windows ME/2000: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Double click DISPLA Y . 5 Click SETTINGS. 6 Set the resolution SLIDE-BAR to 1 920 by 1080 .
18 Hotkeys Power Press the Power button to turn 0n/off the monitor . Volume/- When there is no OSD.press Volume - to active volume adjustment bar.press - or + to adjust volume. 4:3 or wide image ratio / + W hen there is no OSD, press hotkey continuously to change 4:3 or wide image ratio.
19 OSD Setting Basic and simple instruction on the control keys. 1) Press the MENU-button to activate the OSD window . 2) Press - or + to navigate through the functions. Once t he desired functio n is highlighted, press the MENU-button to activate sub-menu .
Luminance Press Menu to display MENU Press (Menu) to display menu. Press or to select (Luminance) , and press to enter . Press or to select submenu, press to enter , and press or to adjust.
21 Brightness 0-100 Backlight Adjustment Contrast 0-100 Contra st from Digital-register. Standard Standard Mode Tex t Text Mode Internet Internet Mode Game Game Mode Movie Movie Mode Eco mode Sports S.
22 Image Setup Press +/- select (Image picture), and Menu to enter Press (Menu) to display menu. Press - or + to select (Image Setup) , and press to enter .
23 Clock 0-100 Adjust picture Clock to reduce Vertical-Line noise. Phase 0-100 Adjust Picture Phase to reduce Horizontal-Line noise H.Position 0-100 Adjust the horizontal positio n of the picture. V.Position 0-10 0 Adjust the vertical position of the picture.
24 Color T emperature Press (Menu) to display menu. Press - or + to select (Color T emperature) , and press to enter . Press - or + to select submenu, press to enter , and press - or + to adjust.
25 Warm 6500K Recall Warm Color Temperature from EEPROM. Normal 7300K Recall Normal Color T emperature from EEPROM. Cool 9300K Recall Cool Color T emperature from EEPROM. sRGB Recall SRGB Color Temperature from EEPROM. Red Red Gain from Digital-register Green Green Gain Digital-register.
26 Color Boost Press (Menu) to display menu. Press - or + to select (Color Boost) , and press to enter . Press - or + to select submenu, press to enter , and press - or + to adjust.
27 Full Enhance on or off Disable or Enable Full Enhan ce Mode Nature Skin on or off Disable or Enable Nature Skin Mode Green Field on or off Disable or Enable Green F ield Mode Sky-blue on or off Dis.
28 Picture Boost Press (Menu) to display MENU. Press - or + to select (Picture Boost); and press to enter . Press - or + to select Bright Frame. Select “on” to activate Picture Boost. Press - or + to select submenu, press to enter , and press - or + to adjust.
29 Frame Size 14-100 Adjust Frame Size Brightness 0-100 Adjust Frame Brightness Contrast 0-100 Adjust Frame Contrast H. position 0-100 Adjust Frame horizontal Position V.
30 OSD Setup Press (Menu) to display menu. Press - or + to select (OSD Setup) , and press to enter . Press - or + to select submenu, press to enter , and press - or + to adjust.
31 OSD Setup H.Position 0-100 Adjust the horizontal position of OSD V.Position 0-10 0 Adjust t he vertical position of OSD Timeout 5-120 Adjust the OSD Timeout Transparence 0-100 Adjust the transparen.
32 Extra Press (Menu) to display menu. Press - or + to select (OSD Setup) , and press to enter . Press - or + to select submenu, press to enter , and press - or + to adjust.
33 Input Select Auto Select to Auto De tect input signal Analog Select Analog Signal Source as Input DVI Select DVI So urce as Input Auto Config yes or no Auto adjust the picture to default Image Rati.
34 Reset Press - or + to select YES or NO. Press (Menu) to display menu. Press - or + to select (Reset), and press to enter . Press to exit..
35 Reset yes or no Reset the menu to default.
36 Exit Exit Exit the main OSD Press (Menu) to display menu. Press - or + to select (Exit); and press to e xit ..
37 LED Indicator Stat us LED Color Full Power Mode Active-off Mode Amber Blue.
38 Driver Monitor Driver Windows 7 1.S tart Windows® 7 2.Click on the 'St art' button and then click on 'Control Panel'. 3. Click on the 'Display' icon.
39 4.Ckick on the “Change display settings ” button. 5. Click the “ A dvanced Settings” button. 6. Click the “Monitor” tab and then click the “Properties” button.
40 7.Click the “Driver” tab. 8. Open the "Update Driver Soft w are-Generi c PnP Monitor" window by clicking on “Update Driver... “ and then click the "Browse my computer for driver software" button. 9. Select "Let me pick from a list of device driv ers on my computer" .
41 10. Click the “Have Disk” button. Click on the “Brow se” button and navigate to the following directory: X:Drivermodule name ( where X is the drive letter designator for the CD-ROM drive). 11. Select the "xxx.inf" file and click the “Open” button.
42 Windows Vist a 1. Click "S tart " and "Control Pane l". Then, doubl e-click on " Appearance and Personalization". 2. Click "Personalization" and then "Display Settings". 3. Click "Advanced Settings.
43 4. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for your monitor is completed. The monitor can be used as is. If the message "Windows needs..." is displayed, as shown in the figure below , click "Continue".
44 Windows XP 1. S tart Windows® XP 2. Click on the 'S tart' button and t hen click on 'Control Panel'. 3. Select and click on the categor y ‘Appearance and Themes’ 4.
45 5. Select the 'Settings' tab then click on the 'Advanced' butt on. 6. Select 'Monitor' tab - If the 'Properties' button is inactive, it means your m onitor is properly configur ed. Please stop installation. - If the 'Properties' button is active, click on 'Properties' button.
46 8. Select the 'Install from a list or specific location [ advanced]' radio button and then click on the 'Next' button. 9. Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button.
47 Windows 2000 1. S tart Windows® 2000 2. Click on the 'S tart' button, point to 'S ettings', and then click on 'Control Pane l'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced.
48 i-Menu Welcome to “i-Menu” software by AOC. i-Me nu makes it easy to adjust your monitor display setting by using o n screen menus instead of the OSD button on the monitor .
49 e-Saver Welcome to use AOC e-Saver monitor po wer management software! The AOC e-Saver features Smart Shutdown functions for your monitors, all ows your monitor to timely shutdo wn when PC unit is at any status (On, Off, Sleep or Screen Saver); the actual shutdown time depends on your preferences (see example below).
50 Screen+ Screen+ software is a desktop screen splitting t ool, it splits the desktop into different panes, each pane displays a different window . Y ou only need to drag the windo w to a corresponding pane, when you want to access i t. It supports multiple monitor display to make your task easier .
5 1 T roubleshoot Problem & Question Possible Solutions Power LED Is Not ON Make sure the power button is ON and the Power Cord is properly connecte d to a grounded power outlet and to the monitor . No images on the screen Is the power cord connected properly? Check the power cord connection and po wer supply .
5 2 Monitor Is Stu ck In A ctive Off-Mode" The Computer Power Switch should be in the ON position. The Computer Video Card should be snugly fitted in its slot. Make sure the monitor's video cable is prop erly connected to the computer . Inspect the monitor's video cable and mak e sure no pin is bent.
5 3 S pecification General S pecification Model number e2 795 V h Driving system Viewable Image Size 68.6 cm diagoanl Pixel pitch 0. 311 mm(H) x 0. 311 mm(V) Video R, G , B Analog lnterface Separate Sy nc. H/V TTL Display Color 16.7M Colors Panel Dot Clock 210 MHz Horizontal scan range 30 kHz - 8 3 kHz Horizontal scan Size(Maximum) 597.
5 4 Altitude: Operating 0~ 3 ,658 m (0~ 12, 000 ft ) Non-Operating 0~ 12,192 m (0~ 40, 000 ft ) Preset Display Modes STANDARD RESOLUTION HORIZONT A L FREQUENCY(KHz) VERTICAL FREQUENCY(Hz) VGA 640x480@60H z 31.469 59.94 640x480@72H z 37.861 72.809 640x480@75H z 37.
5 5 Pin Assignment s Pin Number 15-Pin Side of the Sign al Cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 N.C. 5 Detect Cable 6 GND-R 7 GND-G 8 GND-B 9 +5V 10 Ground 11 N.C. 12 DDC-Ser ial data 13 H-s ync 14 V- s y n c 15 DDC-Ser ial clock Pin No. Signal Name Pin No.
5 6 Plug and Play Plug & Play DDC2B Feature This monitor is equipped wi th VESA DDC2B capabilities according to the VESA DDC ST ANDARD. It allows the monitor to inform the host system of its identity and, dependi ng on the level of DDC used, communicate additional information about its display capabilities.
5 7 Regulation FCC Notice FCC Class B Radio Freq uency Interferen ce St atemen t W ARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to compl y with the limits for a Class B digit al device, pursuant t o Part 15 of the FCC Rules.
5 8 WEEE Declaration Disposal of W aste Equipment by Users in Pr ivate Household in the Europe an Union. This symbol on the product or on its packaging indicates t hat this product must not be di sposed of with your other household wast e.
5 9 EPEA T Declaration EPEA T is a system to help purchasers i n the public an d private sectors evaluate, compare and select desktop computers, notebooks and monitors ba sed on their environmental attributes .
60 Service W arranty S t atement for Europe LIMITED THREE-YEAR W ARRANTY* AOC Color Monitors sold within Europe AOC International (Europe) GmbH warrant s this product to be free from defects in material and workmanship for a period of Three (3) years after the original date of c onsumer purchase.
6 1 modified or altered; you bear the sole responsibility and liabilit y for any such modification or alteration. ALL E XPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE W ARRANT IES OF ME.
6 2 W arranty St atement for North & South America (excluding Brazil) W ARRANTY ST A T EMENT for AOC Color Monitors Including those Sold w ithin North America as S pecified Envision Peripherals, Inc.
6 3 ALL E XPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE W ARRANT IES OF MERCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPOSE) ARE LIMITED IN DURA TION TO A PERIOD OF THREE (3) YEA RS FOR P ARTS AND LABOR AND ONE (1) YEAR FOR CRT TUBE OR LCD P ANEL FROM THE ORIGINAL DA TE OF CONSUMER PURCHASE.
6 4 W arranty St atement for AP LIMITED THREE-YEAR W ARRANTY* AOC Color Monitors sold within AP AOC is one internal brand for its professional monitor ,T V technology ,af fordable pric e and available service .Customer satisfaction-oriented is always what we are pursuing .
デバイスAOC e2795Vhの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
AOC e2795Vhをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAOC e2795Vhの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。AOC e2795Vhの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。AOC e2795Vhで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
AOC e2795Vhを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAOC e2795Vhの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、AOC e2795Vhに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAOC e2795Vhデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。